Barco PGWU-61B Manuel D’Utilisation

44

PGXG-61B/PGWX-61B/PGWU-61B - - 2015/04/01

Turn the projector off and unplug the power cord. 

1. 

Allow the projector to cool down for at least 1 minute then start the lens 

2. 

replacement.

Remove the lens ring cover. 

3. 

1

Remove the lens cap counterclockwise. 

4. 

2

Pull the bar to release the lock. 

5. 

3

Be sure the label of lens is upward and then push the lens into the position. 

6. 

4

Rotate the lens clockwise to lock the lens while pull the bar 

7. 

3

 to release the lock. 

5

Put the lens ring cover back to its place. Push rubber fingers over lens edge.

8. 

6

To replace the lens module, reverse the previous steps.

9. 

Lens cap should be removed before installing. If not it will damage the projector.

10. 

6.3  Replacing the Lens