Yamaha TRX-1R Manuel D’Utilisation

Engli

s

h

• Place both the wireless transmitter unit and wireless 

receiver unit at least 30 cm off the ground.

• Make sure that you place the wireless transmitter unit and 

wireless receiver unit 2–15 meters apart.

• Avoid placing the wireless units too close to your 

amplifier, AC adaptor, TV or other electrical equipment 
as it may cause electrical interference.

Connect and carefully match the wireless 
transmitter unit inputs to the corresponding 
surround speaker jacks on your amplifier.

• Connect the blue/black speaker terminal cables to the 

surround L speaker jack on your amplifier, and the grey/
black speaker terminal cable to the surround R speaker jack.

• Connect the black speaker cables to the minus terminals of 

the speaker jacks, and the blue (or grey) speaker cables to the 
positive terminals.

Connect the AC adaptor to the wireless 
transmitter unit and an AC outlet.

■ Connecting to the YAMAHA 

When connecting to the YAMAHA DVR-S150/S120/S200 
or the AVC-S20, connect the supplied cable plugs (B) to 
the speaker terminal cables as shown below.

Press and hold the release button, insert the speaker 
terminal cable core into the cable plug (B), then release the 
button.
Match the speaker terminal cable polarity (+/–) with the 
polarity marks (+/–) of the cable plug.

Attach the other cable plug (B) in the same way.

←

To AC outlet

→

 

To AC outlet

→

 

To your amplifier

AC adaptor

2–15 m

TRX-1T

TRX-1R

→

 

To your speakers

Polarity mark +

Polarity mark –

Release button

(Black)

(Blue or Gray)