Sony KP-41PX1K Manuel D’Utilisation

No picture (screen is dark), no sound.

Poor or no picture (screen is dark),
but good sound.

Poor picture quality when watching a 
RGB video source.

Good picture, no sound

No colour on colour programmes

Distorted picture when changing 
programmes or selecting teletext

Noisy picture when viewing TV channel

Remote control does not function

The standby indicator 

 on the set 

flashes.

Additional Information

 Here are some simple solutions to the problems which may affect the picture and sound.

• Plug the projection TV in.
• Press the

 

button on the front of the projection TV.

•  If the 

 indicator is on, press TV 

 button or a programme 

number button on the remote control.

• Check the aerial connection.
• Turn the projection TV off for 3 or 4 seconds and then turn it 

on again using the

 

 

button on the front of the projection 

TV.

• Using the MENU system, select the Picture Adjustment 

display. 
Adjust the brightness, picture and colour balance levels.

• From the Picture Adjustment display select Reset to return 

to the factory settings.

• Press the 

 button repeatedly on the remote control until 

the RGB symbol 

 is displayed on the screen.

• Press the 

 +/- button on the remote control.

• If 

 is displayed on the screen, press the 

 button on the 

control.

• Check that "Main" speaker is selected on the SOUND 

CONTROL menu.

• Using the MENU system, select the Picture Adjustment 

display. Adjust the colour balance.

• From the Picture Adjustment disply select Reset to return to 

the factory settings.

• Turn off any equipment connected to the 21 pin Euro 

connectors on the rear of the TV.

• Adjust Fine Tuning (AFT) to obtain better picture reception. 

For details, please refer to the section "Using the Further 
Programme Preset function"

• Replace the batteries.

• Contact your nearest Sony service centre.

01GBK.fm  Page 33  Tuesday, October 23, 2001  5:03 PM