Panasonic DW5100UL Manuel D’Utilisation
11
AC IN terminal (page 24)
Connect the supplied line power cord into this
receptacle.
Do not connect any other cable to this socket.
Connect the supplied line power cord into this
receptacle.
Do not connect any other cable to this socket.
Air filter (page 55)
Burglar lock
Attach a commercial burglar prevention cable (e.g.,
from Kensington) to this lock port. It is compatible
with the Microsaver Security System from
Kensington.
Attach a commercial burglar prevention cable (e.g.,
from Kensington) to this lock port. It is compatible
with the Microsaver Security System from
Kensington.
Clasp for attaching anti-theft chain
Attach a chain or other fastening device available
from a hardware store through this clamp.
Attach a chain or other fastening device available
from a hardware store through this clamp.
Level-adjusting feet (page 24)
Use these feet to adjust the tilt of the projector.
(The leveling feet at the front left and right can be
adjusted.)
Use these feet to adjust the tilt of the projector.
(The leveling feet at the front left and right can be
adjusted.)
Lens release button (page 26)
Press this to remove the projection lens.
Press this to remove the projection lens.
Projection lens
Lens for projecting images on the screen.
Lens for projecting images on the screen.
Lens left/right adjusting dial (page 27)
Turn this clockwise to move the screen to the left;
conversely, turn it counterclockwise to move it to
the right.
Turn this clockwise to move the screen to the left;
conversely, turn it counterclockwise to move it to
the right.
Remote control receiver window (front) (page 14)
This window receives the signal beam emitted from
the remote control.
This window receives the signal beam emitted from
the remote control.
Focus ring (page 26)
For focus adjustment.
Powered focus adjustment is also available.
For focus adjustment.
Powered focus adjustment is also available.
Temperature monitor (TEMP) (page 54)
Lighting or blinking of this lamp indicates an
abnormal condition of the internal temperature.
Lighting or blinking of this lamp indicates an
abnormal condition of the internal temperature.
LAMP1 monitor (page 54)
This lamp lights up when the time to replace lamp
unit 1 is reached. It also blinks if something
unusual occurs in the lamp circuit.
This lamp lights up when the time to replace lamp
unit 1 is reached. It also blinks if something
unusual occurs in the lamp circuit.
LAMP2 monitor (page 54)
This lamp lights up when the time to replace lamp
unit 2 is reached. It also blinks if something
unusual occurs in the lamp circuit.
This lamp lights up when the time to replace lamp
unit 2 is reached. It also blinks if something
unusual occurs in the lamp circuit.
Power indicator (page 24)
The lamp lights in red when the MAIN POWER
switch is turned to “l” (on). It turns to green when
the POWER ON button of the remote control or the
main unit is pressed.
The lamp lights in red when the MAIN POWER
switch is turned to “l” (on). It turns to green when
the POWER ON button of the remote control or the
main unit is pressed.
Lens cap
Cap the lens whenever the projector is left unused.
Cap the lens whenever the projector is left unused.
Air intake vents
Side-mounted
connection terminals
(page 13)
connection terminals
(page 13)
Status LED lights
(Refer to the figure
on the right.)
(Refer to the figure
on the right.)
Front and side of the projector
Status LED lights
• Do not remove the upper cover (white or
black top panel).
Attention