Sony KDP 65XBR2 Mode D'Emploi
Setting Up the Projection TV
28
Connecting a Camcorder
For easy connection of the camcorder, the projection TV has front
Audio and Video inputs (shown below). If you prefer, you can
connect the camcorder to the projection TV’s rear Audio and Video
IN jacks.
Audio and Video inputs (shown below). If you prefer, you can
connect the camcorder to the projection TV’s rear Audio and Video
IN jacks.
❑
Using A/V cables, connect the camcorder’s Audio and Video
OUT jacks to the projection TV’s Audio and Video IN jacks.
OUT jacks to the projection TV’s Audio and Video IN jacks.
If you have a mono camcorder, connect its audio output to the
projection TV’s AUDIO L jack.
projection TV’s AUDIO L jack.
VID
EO
2 IN
PUT
S V
IDE
O
VIDEO
AUDIO
L(MONO)
R
VOLUME
FLASH FO
CUS
CHANNEL
+
–
+
–
TV/VIDEO
MENU
Push to open
Inside the front panel
of the projection TV
of the projection TV
Camcorder
✍
If the camcorder you are connecting has an S VIDEO jack, you can use an
S VIDEO cable for improved picture quality (compared to a combination
audio/video cable). Because S VIDEO cables carry only the video signal, you
will also need audio cables for sound.
S VIDEO cable for improved picture quality (compared to a combination
audio/video cable). Because S VIDEO cables carry only the video signal, you
will also need audio cables for sound.