Epson CPD-1790-4R2 Manuel D’Utilisation

1. Press the 

Menu

 button on the projector or remote control.

2. Highlight the 

Reset

 menu and press the 

Select

 button.

3. Select 

Lamp Hours Reset

. 

4. When you see a prompt asking whether you want to execute the command, highlight 

Yes

 

and press the 

Select

 button.

5. When you’re finished, press 

Esc

 or 

Menu

.

The lamp usage timer doesn’t register until you’ve used the lamp for at least 10 hours.

If you need to store the projector for awhile, do the following:

■

Make sure the temperature and humidity of the storage area are within the recommended 
range for the projector (14 to 140 °F [-10 to 60 °C] and 10 to 90% relative humidity).

■

Attach the lens cover and retract the feet.

■

Remove the battery from the remote control.

■

Package the projector in its original packaging or equivalent (as described in the following 
section).

Note: Epson shall not be liable for any damages incurred during transportation.

The projector contains many glass and precision parts. If you need to transport it, follow these 
guidelines to prevent damage:

■

When shipping the projector for repairs, use the original packaging material if possible. If 
you do not have the original packaging, use equivalent materials, placing plenty of 
cushioning around the projector. Be sure the carrier is capable of transporting fragile 
equipment and is aware that the projector is fragile.

■

When you are hand-carrying the projector, use the recessed hand grips on the sides.