Hitachi 27K 50SX8B Manuel D’Utilisation

Page de 82
INITIAL SETUP 
 
52
DOWN (
) buttons. 
 
If the EXIT button is pressed while the AUTO CHANNEL SET function is engaged, 
programming will stop. If two antennas are connected, switch antenna inputs with the 
INPUT button and repeat AUTO CHANNEL SET for the second antenna input. 
Remember to select the correct SIGNAL SOURCE mode before using AUTO 
CHANNEL SET for the second antenna input. 
See CHANNEL MEMORY to add or erase additional channels. 
CHANNEL MEMORY 
Use this function after AUTO CHANNEL SET to add or erase additional channels to the 
remote control CHANNEL 
 or 
 buttons.