Beko DCU 6130S Manuel D’Utilisation

17 EN

Your dryer will give an audio warning when the 
programme comes to an end. If you do not 
want to hear the audio warning, press “Cancel 
Audio Warning” button. The relevant light 
will turn on when this button is pressed and 
an audio warning will not be given when the 
programme comes to an end.

C

 You can select this function either before or 

after the programme starts. 

C

 Warning indicators may differ according to 

the model of your dryer.

A warning light will turn on to remind filter 
cleaning after the programme finishes.

C

 If the filter cleaning warning light lights up 

continuously, please refer to, “Suggested 
solutions for problems”.

Warning light starts flashing when the tank is 
filled with water. The dryer stops operating if 
the warning light turns on when a programme 
is running. Drain the water in the water tank to 
restart the dryer. Press “Start/Pause/Cancel” 
button to start the programme after you have 
emptied the water tank. The warning light turns 
off and the programme resumes operating.

1.  Press “Start/Pause/Cancel” button to start 

the programme.

2.  Light of the “Start/Pause/Cancel” button 

will turn on to indicate that the programme 
has started.

Progress of a running programme is shown 
through the programme follow-up indicator.
At the beginning of every programme step, the 
relevant indicator LED will light up and light of 
the completed step will turn off.

- Drying level will be illuminated during the whole 
drying process until the drying degree reaches 
“iron dry”.

- Starts to illuminate when the drying degree 
reaches “iron dry” step and remains illuminated 
until the next step.

Starts to illuminate when the drying degree 
reaches “Ready to wear” step and remains 
illuminated until the next step.

- Illuminates when the programme comes to an 
end and anti-creasing function is activated.

C

 If more than one LED light up or 

flash concurrently, it means there is 
malfunctioning or a failure (please see, 
Solution suggestions for problems).

You can use this feature to dry your clothes 
under higher or lower temperatures after your 
dryer has started.
For example;
1.  Press and hold the “Start/Pause/Cancel” 

button for about 3 seconds to “Cancel” 
the programme in order to select “Extra 
Dry” programme instead of “Iron Dry” 
programme. 

2.  Select the “Extra Dry” programme by 

rotating the programme selection button.

3.  Press “Start/Pause/Cancel” button to start 

the programme.

C

 Press “Start/Pause/Cancel” button for 

3 seconds to cancel the programme or 
turn the programme selection knob in any 
direction to end the programme while the 
machine is running. Water tank and filter 
cleaning warning lights turn on to warn the 
user when the programme is cancelled by 
pressing the “Start/Pause/Cancel” button 
for 3 seconds. However, the warning 
lights do not turn on when the programme 
is cancelled by turning the programme 
selection knob. Only the drying light turns 
on and the machine remains in hold until 
a new programme is selected and the 
“Start/Pause/Cancel” button is pressed. 
Child-proof lock of the machine should 
not be active in order to perform these 
two operations. If the child-proof lock is 
active, deactivate it before performing these 
operations.