Epson 3010 Manuel D’Utilisation
62
Maintenance
Cleaning and Replacing the Air Filter
Your projector includes an air filter to ensure the best performance. If dust collects on the air
filter, clean it as described below. Dust clogs prevent proper ventilation and cause overheating
and damage to the projector.
filter, clean it as described below. Dust clogs prevent proper ventilation and cause overheating
and damage to the projector.
You can replace the air filter while the projector is mounted to the ceiling, if necessary. The
illustrations here show the projector placed on a table.
illustrations here show the projector placed on a table.
1. Press the Ppower button on the projector twice or the
Standby
button on the remote
control and wait for the power light to stop flashing. The projector cools down.
2. Unplug the power cord.
3. Pull straight out on the filter holder to remove it.
4. Remove the air filter as shown.
pl3010_3010e_UG.book Page 62 Wednesday, September 7, 2011 6:28 PM