Panasonic SC-BTX70 Manuel D’Utilisation

RQT9464

≥The following sound effects/modes may not be available or have no effect with some sources, or when headphones are used (> 16).

≥You may experience a reduction in sound quality when these sound effects/modes are used with some sources. If this occurs, turn the 

sound effects/modes off.

1 Press [SOUND] several times to select the mode.

≥You can also press [SOUND] and then [3, 4] to select the 

mode.

≥The selected effect will only be displayed on the main unit.

2

While the selected mode is displayed

Press [2, 1] and select the desired setting.

∫ When only the supplied speakers are connected.

≥Underlined items are the factory presets.

Press [SURROUND] several times to select the effect.
≥You can also press [SURROUND] and then [3, 4] to select the 

mode.

≥The selected effect will only be displayed on the main unit.
When selecting the MANUAL effects below.

While “MANUAL” is displayed

Press [2, 1] and select the desired effect.

∫ When the optional surround, surround back speakers 

When 1 or 2 optional Panasonic wireless system(s) SH-FX70 are 
connected and the appropriate settings have been made in the 

“EASY SETUP” the following sound effects will be available.
≥Underlined items are the factory presets.

You can select sound quality settings.
– FLAT(Flat):

Cancel (no effect is added).

– HEAVY(Heavy):Adds punch to rock.

– CLEAR(Clear): Clarifies higher sounds.

– SOFT(Soft):

For background music.

This unit will change the settings for the 
amount of bass depending on the source.

However you can also adjust the amount of 
bass for the source being played.
–1 (Weakest effect) 

–2 

–3 

–4 (Strongest effect) 

≥The setting you make is retained, and 

recalled every time you play the same type of 

source.

You can enhance the surround effect for low 

volume sound.
(Convenient for late night viewing.)

OK

SOUND

SURROUND

-CH SELECT

: You can enjoy 5.1/7.1-channel surround-like 

effect using 2.1-channel speakers.

This function is effective only when playing 
4.1 ch sources or above.

2CH STEREO: You can play any source in stereo without the 

surround sound effect.

You can enjoy a surround sound effect similar to 

5.1 ch (Dolby Digital or DTS) with any audio 
source, using the included front speakers and the 
subwoofer. You can also enjoy a surround sound 
effect with stereo sources such as CDs.

REFERENCE
Standard mode
WIDE
≥This mode widens the acoustic field of the 

front speakers. This has a good effect when 

there is little space between the speakers.

Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.

You can enjoy sound from the front speakers, 
as well as the surround speakers even when 

playing a 2-channel sound or non-surround 
sound.

– DOLBY PL II MOVIE*

4

Suitable for movie software, or the one recorded 

in Dolby Surround. (except 

[DivX]

)

– DOLBY PL II MUSIC*

4

Adds 5.1-channel effects to stereo sources. 

(except 

[DivX]

)

You can enjoy sound from all speakers with 

stereo sources.

You can play any source in stereo. Sound will be 

output to the front speakers and the subwoofer 

only and without the surround sound effect.

*1 7.1CH VS is not available when the audio source currently playing is 2.1 ch, 3.1 ch.
*2 The 7.1-channel surround-like effect will only function when playing 6 or more channel sources.
*3 Dolby Virtual Speaker is not available and “NOT CONDITIONAL” is displayed when the audio source currently playing is 

3.1 ch, 3 ch, 1.1 ch or 1 ch.

*4 The effects do not work when audio is output from the HDMI AV OUT terminal.
≥“NOT CONDITIONAL” is displayed on the main unit if the setting is not active.

When the unit has been set for 4.1 ch or 6.1 ch output, it is not possible to select the sound effects for 2.1 ch or vice versa.

SC-BTX70EGEB-RQT9464-B.book  15 ページ  ２００９年４月９日　木曜日　午後２時５３分