Monster Cable HTPS 7000 MKII Manuel D’Utilisation

Please read and observe the following safety points at all times.

Do not plug this PowerSource

™

 into a power outlet that differs from the source indicated for safe use 

on the PowerSource. If you don’t know the type of electrical power that is supplied to your home, consult 
your local power company or a qualified electrician.

A.  Do not force your PowerSource

™

 plug into an outlet that is not designed to accept a three-wire grounded-type 

AC plug (a three-prong plug). This plug is designed to be inserted into a grounded-type outlet only. If this plug 
doesn’t fit directly inside your outlet, do not attempt to force it into the outlet. Never attempt to dismantle 
the plug in any way (or to alter the power cord). Do not attempt to defeat the grounding feature by using 
a 3-to-2 prong adapter. If you have questions about grounding, consult your local power company 
or a qualified electrician.

B.  If you use rooftop devices such as satellite dishes, antennas, or any other component with wire that connects 

to your PowerSource

™

, be sure the wire(s) is properly grounded. Use grounding techniques specified in Section 

810 of the National Electrical Code (NEC), ANSI/NFPA 70 (in Canada, Part 1 of the Canadian Electrical Code). 
This protects against voltage surges and static charges. 

C.  Do not place any antenna near overhead power lines or any other power circuit. Do not touch any power line 

or power circuit. Doing so may cause severe physical injury or possibly death. 

A.  Do not operate your Monster PowerSource if liquid of any kind is spilled onto or inside the unit. 

B.  Do not operate your Monster PowerSource near rain or water that’s spilled or contained (e.g., bathtub, 

kitchen or sink).