Lucent Technologies 4.1 Manuel D’Utilisation
Direct Line Pickup—Idle Line (I8LL)
Description
This feature allows users to access a specific outside line (where LL is a line
number from 01–24) when the line is not in use. This feature is useful for
accessing a line that is not assigned to the phone.
number from 01–24) when the line is not in use. This feature is useful for
accessing a line that is not assigned to the phone.
Related Features
■
If a line is in use, users cannot access it with this feature (they hear busy
tone). For information on accessing a ringing or held call, or joining a call in
progress, see Direct Line Pickup—Active Line.
tone). For information on accessing a ringing or held call, or joining a call in
progress, see Direct Line Pickup—Active Line.
■
If Line Access Restriction (#302) or Pool Access Restriction (#315) is set
to No Access or In Only for a line assigned to an extension or lines within a
pool, a user at the restricted extension hears busy tone if Direct Line Pickup
is used to access that line to place a call.
to No Access or In Only for a line assigned to an extension or lines within a
pool, a user at the restricted extension hears busy tone if Direct Line Pickup
is used to access that line to place a call.
Considerations
■
■
This procedure applies to individual lines. If you have a pooled extension
and you want to access lines in pools that are not assigned to your
and you want to access lines in pools that are not assigned to your
extension, dial the pool access code at intercom dial tone.
You can program a Direct Line Pickup—Idle Line button on a system phone
to pick up a line by pressing the button then dialing the two-digit line
number.
to pick up a line by pressing the button then dialing the two-digit line
number.
Programming
To program a Direct Line Pickup—Idle Line button:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
Central Tel Program
].
2.
Enter the number of the extension to be programmed with this feature.
3.
Press a programmable button.
4.
Press left [
Intercom
] [
8
].
5.
Program another button for this extension or exit programming mode.
Using
System Phone
1.
If you want, lift the handset.
2.
Press the programmed button and dial the two-digit line number (01–24) of the
idle line you want to access; or dial [
idle line you want to access; or dial [
Intercom
] [
8
] and the two-digit line
number.
If you did not Iift the handset, the speaker comes on automatically.
If you did not Iift the handset, the speaker comes on automatically.
Standard Phone
1.
Lift the handset.
You hear intercom dial tone.
2.
Dial [
8
] and the two-digit line number (01-24) of the idle line you want to
access.
Direct Line Pickup—Idle Line (I8LL)
5-69