Cisco Systems Linksys PAP2 Manuel D’Utilisation
CWT8 Cadence
Cadence script for distinctive CWT 8
CadScript
2.3(..3/2)
Ring Waveform
Waveform for the ringing signal
{Sinusoid,
Trapezoid}
Trapezoid}
Sinusoid
Ring Frequency
Frequency of the ringing signal. Valid values
are 10 – 100 (Hz)
are 10 – 100 (Hz)
Uns8 25
Ring Voltage
Ringing voltage. 60-90 (V)
Uns8
70
CWT Frequency
Frequency script of the call waiting tone. All
distinctive CWT is based on this tone.
distinctive CWT is based on this tone.
FreqScript 440@-10
4.9.2.
Progress Tones
Most of the 18 progress tones in the PHONE ADAPTER are played automatically in response to fixed
stimuli. However, the administrator can select which SIP response codes correspond to the 4 SIT
tones.
stimuli. However, the administrator can select which SIP response codes correspond to the 4 SIT
tones.
Response Status Code Handling
SIT1 RSC
1
SIP response status code to INVITE on which
to play the SIT1 Tone
to play the SIT1 Tone
RscTmplt
SIT2 RSC
1
SIP response status code to INVITE on which
to play the SIT2 Tone
to play the SIT2 Tone
RscTmplt
SIT3 RSC
1
SIP response status code to INVITE on which
to play the SIT3 Tone
to play the SIT3 Tone
RscTmplt
SIT4 RSC
1
SIP response status code to INVITE on which
to play the SIT4 Tone
to play the SIT4 Tone
RscTmplt
The Frequencies of the actual progress tones are configurable to accommodate local and regional
conventions.
Parameter Name
Description
Type
Default
Dial Tone
1
Played when prompting the user to enter a
phone number
phone number
ToneScript 350@-19,440@-
19;10(*/0/1+2)
Second Dial Tone
An alternative to <Dial Tone> when user
tries to dial a 3-way call
tries to dial a 3-way call
ToneScript 420@-19,520@-
19;10(*/0/1+2)
Outside Dial Tone
1
An alternative to <Dial Tone> usually used
to prompt the user to enter an external
phone number (versus an internal
extension). This is triggered by a “,”
character encountered in the dial plan.
to prompt the user to enter an external
phone number (versus an internal
extension). This is triggered by a “,”
character encountered in the dial plan.
ToneScript 420@-16;10(*/0/1)
Prompt Tone
1
Played when prompting the user to enter a
call forward phone number
call forward phone number
ToneScript 520@-19,620@-
19;10(*/0/1+2)
Busy Tone
Played when a 486 RSC is received for an
outbound call
outbound call
ToneScript 480@-19,620@-
19;10(.5/.5/1+2)
Reorder Tone
1,2
Played when an outbound call has failed
or after the far end hangs up during an
established call
or after the far end hangs up during an
established call
ToneScript 480@-19,620@-
19;10(.25/.25/1+2)
Off Hook Warning
Tone
Tone
2
Played when the subscriber does not
place the handset on the cradle properly
place the handset on the cradle properly
ToneScript 480@-
10,620@0;10(.125/
.125/1+2)
.125/1+2)
Ring Back Tone
Played for an outbound call when the far
end is ringing
end is ringing
ToneScript 440@-19,480@-
19;*(2/4/1+2)
© 2004 Linksys Proprietary (See Copyright Notice on Page 2)
69