Audiovox GMRS-1500 Manuel D’Utilisation
10.
Press the Up or Down button until +TX appears flashing; then press the
Monitor (M) button to confirm the alarm transmit setting.
Monitor (M) button to confirm the alarm transmit setting.
NOTE: This mode will only operate if the radio ID is enabled on and the
unit’s temperature triggers a temperature alarm.
TIME MODE
The Time mode provides you with a reliable clock which not only indicates the
time-of-day on a 12 or 24 hour basis, but also permits an alarm set capability
provided the beep tone feature is enabled. To access the time mode, proceed as
follows:
time-of-day on a 12 or 24 hour basis, but also permits an alarm set capability
provided the beep tone feature is enabled. To access the time mode, proceed as
follows:
1.
From the GMRS TWO WAY mode (CH and CODE displayed), press the
Function(F) button 5 times; TIME is momentarily displayed, followed by the
indication in AM or PM.
Function(F) button 5 times; TIME is momentarily displayed, followed by the
indication in AM or PM.
2.
To set the clock to a 12 hour display, press the right menu button once; the
hours digits will flash. (To access the 24 hour display, press the Up or Down
buttons until the AM/PM indication disappears from the display; then proceed
with the hour/minute setting.)
hours digits will flash. (To access the 24 hour display, press the Up or Down
buttons until the AM/PM indication disappears from the display; then proceed
with the hour/minute setting.)
3.
Press the Up button or Down button; the hour indication will change between
1 and 12 accordingly. As the hour indication passes through 12 noon, the AM
indication changes to PM.
1 and 12 accordingly. As the hour indication passes through 12 noon, the AM
indication changes to PM.
4.
When the hour is set, press the right menu button again; the minutes
indication will flash.
indication will flash.
5.
Press the Up or Down button; the minutes indication will change between 00
and 59 accordingly.
and 59 accordingly.
6.
Press the right menu button again; ALARM will appear with ON or OFF
flashing, together with the alarm icon (
).
7.
Press the Up or Down button to set the alarm ON or OFF as desired.
8.
If ON is selected, use the right/ left and Up/Down buttons to select the
desired time of alarm in the same manner as time-set in steps 2 through 5
above.
desired time of alarm in the same manner as time-set in steps 2 through 5
above.
9.
After all time functions have been selected and entered, press the Monitor (M)
button to confirm.
button to confirm.
When the alarm time is reached, the unit will repeat four short beeps at 5-second
intervals; pressing any button during the alarm will snooze the alarm for 5 minutes.
To disable the alarm, repeat the above procedure and select OFF at step 7.
intervals; pressing any button during the alarm will snooze the alarm for 5 minutes.
To disable the alarm, repeat the above procedure and select OFF at step 7.
20