Kenwood TM-G707A Manuel D’Utilisation
52
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
AUXILIARY FUNCTIONS
TIME-OUT TIMER (TOT)
It is sometimes necessary or desirable to restrict a single
transmission to a specific maximum time. This feature
can be useful when accessing repeaters to prevent
repeater time-outs, or when trying to conserve battery
power.
transmission to a specific maximum time. This feature
can be useful when accessing repeaters to prevent
repeater time-outs, or when trying to conserve battery
power.
When TOT times out, the transceiver generates beeps
and automatically returns to receive mode. To resume
transmitting, release and then press Mic [PTT] again.
and automatically returns to receive mode. To resume
transmitting, release and then press Mic [PTT] again.
You can change the default TOT time (10 minutes).
1 Press [MNU] to enter Menu mode.
2 Select Menu No. 13 (TOT).
3 Press [OK], then turn the Tuning control to select the
desired TOT time .
• The selectable time are 3, 5, and 10 minutes.
4 Press [OK] again to complete the setting and exit
Menu mode.
AUTOMATIC POWER OFF (APO)
Automatic Power Off is a background function that
monitors whether any buttons or keys have been
pressed, or whether the Tuning control has been turned.
After 3 hours pass with no operations, APO turns OFF
the power. However, 1 minute before the power turns
OFF, “APO” appears and blinks, and a series of warning
tones sound.
monitors whether any buttons or keys have been
pressed, or whether the Tuning control has been turned.
After 3 hours pass with no operations, APO turns OFF
the power. However, 1 minute before the power turns
OFF, “APO” appears and blinks, and a series of warning
tones sound.
Note:
If the squelch opens or any settings are changed during the 3 hour
period while APO is ON, the timer resets. When the squelch closes or
you stop changing the settings, the timer begins counting again from 0.
you stop changing the settings, the timer begins counting again from 0.
1 Press [MNU] to enter Menu mode.
2 Select Menu No. 12 (APO).
3 Press [OK], then turn the Tuning control to switch the
function ON (or OFF).
4 Press [OK] again to compete the setting and exit
Menu mode.