VTech LS6325-5 Manuel D’Utilisation

Once you have installed the battery, the screen indicates the battery status 

(see the table below). If necessary, place the handset in the telephone base 

or charger to charge the battery. For best performance, keep the handset in 

the telephone base or charger when not in use. The battery is fully charged 

after 16 hours of continuous charging. See the table on page 51 for battery 

operating times.
If the screen is blank or shows 

Place in charger, you need to charge the 

handset without interruption for at least 30

 minutes to give the handset 

enough charge to use the telephone for a short time. When the battery is low, 

the handset shows 

Low battery and a flashing   icon. If you are on a call in 

low battery mode, the handset plays short beeps to alert you.

The following table summarizes the battery charge indicators and actions  

to take.

Battery indicators

Battery status

Action

The screen is blank 

or shows 

charger and 

 flashes

.

Battery has very little or 

no charge. The handset 

cannot be used.

Charge without interruption (at 

least 30 minutes).

The screen shows 

Low battery and  

 flashes. 

Battery has enough 

charge to be used for a 

short time.

Charge without interruption 

(about 30 minutes).

The screen shows 

hANDSeT X.

Battery is charged.

To keep the battery charged, 

place it in the telephone base 

or charger when not in use.

If you do not plug in the battery into the handset and place it in the telephone base 

or charger, the screen displays 

No battery.

4