Motorola RMU2080D Manuel D’Utilisation
English
34
GE
TTING S
T
ARTE
D
Hands Free without Accessories (iVOX)
•
Press the PTT button while turning ON the radio
to enable iVOX. The icon
blinks.
•
iVOX can be temporarily disabled by pressing the
PTT button.
PTT button.
•
A short press of the PTT Button re-enables iVOX.
Note:
•
There is a short delay between the time when you
start talking and when the radio transmits.
start talking and when the radio transmits.
•
For more information on setting VOX/iVOX
sensitivity, refer to “Setting VOX /iVOX
Sensitivity” on page 35.
sensitivity, refer to “Setting VOX /iVOX
Sensitivity” on page 35.
Toggle Voice Prompt in User Mode
Short press the SB1 Button while turning ON
the radio to enable/disable the Voice Prompt in
User Mode. (Default is set to ON).
the radio to enable/disable the Voice Prompt in
User Mode. (Default is set to ON).
Power Up - Tone Mode
To enable/disable power up tone mode, press
SB1 and SB2 buttons simultaneously for 2-3
seconds while powering up the radio until you
SB1 and SB2 buttons simultaneously for 2-3
seconds while powering up the radio until you
hear the pre-programmed power up tone. 3
different power-up tones are available:
different power-up tones are available:
•
Power up tone and channel number
announcement, or
announcement, or
•
Battery level and channel number
announcements, or
announcements, or
•
Silent (Audible tones disabled)
Reset to Factory Defaults
Reset to Factory Defaults will set back all radio
features to the original factory default settings.
To do so, press PTT, SB2 and SB1
simultaneously while turning ON the radio until
you hear a high tone chirp.
features to the original factory default settings.
To do so, press PTT, SB2 and SB1
simultaneously while turning ON the radio until
you hear a high tone chirp.
Keypad Beeps
To enable/disable Keypad Beeps, short press
the SB2 button while turning ON the radio until
you hear ‘chirp’ tone.
the SB2 button while turning ON the radio until
you hear ‘chirp’ tone.