Invacare TDX 3 Manuel D’Utilisation

SECTION 5—WHEELCHAIR OPERATION

48

Repositioning the Joystick

NOTE: For this procedure, refer to FIGURE 5.10.
1. Turn the adjustment lock lever to 

release the joystick mounting tube from 

the mounting bracket.

2. Remove the joystick from the wheelchair.
3. Remove the three hex screws that 

secure both halves of the mounting 

bracket to the arm tube.

4. Reposition mounting bracket on 

opposite arm tube ensuring the 

threaded plate of the mounting bracket 

is on the inside of the arm tube as 

FIGURE 5.10   Repositioning the Joystick

5. Using the three hex mounting screws and washers, secure both halves of the mounting 

bracket to the arm tube.

6. Slide the joystick mounting tube through the mounting bracket to the desired position.
7. Turn the adjustment lock lever to secure the joystick mounting tube into the mounting 

bracket.

Washers

Hex 

Mounting 

Screws

Mounting 

Bracket

Adjustment 

Lock Lever

Joystick 

Mounting 

Tube

Mounting Bracket 

(Threaded Plate)

Arm 

Tube

NOTE: 

Joystick 

not 

shown.