Invacare Ranger X RWD Manuel D’Utilisation

3G Storm Series

Wheelchairs

Part No. 1104849

B. Loosen, but do not remove, the two (2) phillips screws, washers and locknuts

that secure the actuator to the upper limit switch bracket.

C. Slide the actuator UP (towards the top of the wheelchair).

CAUTION

DO NOT over tighten the phillips screws that secure the actuator to the
upper limit switch bracket. Damage to the actuator can occur.

D. Only tighten the two (2) phillips screws, washers and locknuts that secure the

actuator to the upper limit switch bracket until the actuator does not move.

E. Repeat STEPS 1-3 until the wheelchair does not operate when the van seat back

is at a 24

angle.

SECTION 10

WIRING HARNESS