Invacare RPA450-1E Manuel D’Utilisation

For more information regarding Invacare products, parts, and services,

please visit www.invacare.com

Rubber Tips for Patient Lifts

Model Nos. RHA450-1, RHL450-1, RPA450-1, RPA450-1E, RPL450-1, RPL450-1E,

RPA600-1, RPA600-1E, RPL600-1

NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact
Carrier/Invacare for further instructions.

Safety Summary

To ensure the safe and proper installation of the Rubber Tips, these instructions MUST

followed:

WARNING

DO NOT install this equipment without first reading and understanding this

instruction sheet. If you are unable to understand the warnings, cautions and

instructions, contact a healthcare professional, dealer or technical personnel if

applicable, before attempting to install this equipment - otherwise, injury or

damage may occur.
Invacare products are specifically designed and manufactured for use in conjunction

with Invacare accessories. Accessories designed by other manufacturers have not

been tested by Invacare and are not recommended for use with Invacare products.

Installing Rubber Tips on the Hanger Bar

NOTE: For this procedure, refer to FIGURE 1.

1. Align the rubber tip with the end of the hanger bar hook.

2. Firmly press the rubber tip onto the hanger bar hook.

3. Ensure the rubber tip is pressed all the way onto the hanger bar hook by flexing it.
NOTE: A blunt tool may be used to press the rubber tip on.

4. Repeat STEPS 1-3 for the remaining hanger bar hooks.

FIGURE 1 Installing Rubber Tips on the Hanger Bar

Assembly, Installation and Operating Instructions

SAVE THESE INSTRUCTIONS

DETAIL “A” - 450 LBS. LIFTS

Hanger Bar

Hook

Rubber

Tip

DETAIL “B” - 600 LBS. LIFTS

Hanger Bar

Hanger Bar Hook

Rubber Tip