Invacare 1086189 Manuel D’Utilisation
Part No 1086188
1
Anti-tippers
For more information regarding Invacare products, parts, and services,
please visit www.invacare.com
Anti-tippers
Kit Nos. 1036900, 1036901, 1064227, 1086189, and 1086190
NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use. Contact
Carrier/Dealer for further instruction.
Carrier/Dealer for further instruction.
This kit includes the following:
*NOTE: Not included with Kit Nos. 1064227, 1086189, and 1086190.
NOTE: To ensure the correct model anti‐tipper is used, refer to Rear Anti‐Tipper Application
Chart on page 4.
Chart on page 4.
Safety Summary
To ensure the safe and proper installation of the anti‐tippers, these instructions MUST
be
followed:
WARNINGS
Invacare products are specifically designed and manufactured for use in conjunction
with Invacare accessories. Accessories designed by other manufacturers have not
been tested by Invacare and are not recommended for use with Invacare products.
DO NOT install this equipment without first reading and understanding this
DO NOT install this equipment without first reading and understanding this
instruction sheet. If you are unable to understand the warnings, cautions and
instructions, contact a healthcare professional, dealer or technical personnel if
applicable, before attempting to install this equipment - otherwise, injury or
damage may occur.
INSTALLATION WARNINGS
Inasmuch as anti-tippers are an option on a particular wheelchair (you may order
with or without the anti-tippers), Invacare strongly recommends ordering
anti-tippers as an additional safeguard for the wheelchair user.
Anti-tippers are specific to the different rear wheels and/or seat-to-floor heights.
Anti-tippers are specific to the different rear wheels and/or seat-to-floor heights.
Refer to this instruction sheet for correct usage and adjustment. If these require-
ments CANNOT be achieved, DO NOT use the wheelchair. Contact an Invacare
dealer or qualified technician. Any changes to the seat-to-floor angle or seat-to-floor
height may require different anti-tippers. The correct anti-tippers must be ordered
to maintain a 1½ to 2-inch ground clearance.
Assembly, Installation and Operating Instructions
SAVE THESE INSTRUCTIONS
DESCRIPTION
QUANTITY
Anti-Tipper
2
Anti-Rattle*
2