Leica DM100 Manuel D’Utilisation
Leica DM100
User Manual
13
Electrical Data and ambient Conditions
In order to maintain this condition and to ensure safe operation,
the user must follow the instructions and warnings contained in
the user must follow the instructions and warnings contained in
this instruction manual.
Environment
Temperature for use
+10 °C … +40 °C
Storage temperature
-20 °C … +52 °C
+50 °F to +104 °F
Manipulation shock
25 mm on 50 mm hard wood
Transport shock (unpacked)
100 g / 6 ms
Transport shock (packed)
800 mm free fall
Transport vibrations (unpacked)
5–200 Hz / 1.5 g
Air pressure during use and storage:
500–1060 mBar
Humidity during use and storage:
20–90%
Installation Category II (Overvoltage Category)
Pollution degree 2
Pollution degree 2
Fuse Replacement
Unplug the instrument before changing any fuses. The Leica
DM100 has two fuses, which are located behind the power cord
DM100 has two fuses, which are located behind the power cord
receptacle.
Only use fuses of the following type: 5×20 mm, 1.0 A/250V, high
breaking capacity (# 13RFAG30003)
breaking capacity (# 13RFAG30003)
Electrical data
Input: 100-240 V, 50/60 Hz, 5 W (3 W LED)
General safety notes
This instrument of safety class 1 has been built and tested in accordance
with the following safety requirements for electrical equipment for measu-
rement, control, and laboratory use:
General safety notes
This instrument of safety class 1 has been built and tested in accordance
with the following safety requirements for electrical equipment for measu-
rement, control, and laboratory use:
EN 61010-1: 2002-08
EN 61010-2: 2008-06
IEC 61010-1: 2010-06
EN 61326-1: 2006-10
EN 61326-2-6: 2006-10
EN 61010-2: 2008-06
IEC 61010-1: 2010-06
EN 61326-1: 2006-10
EN 61326-2-6: 2006-10
EN 55011: 2007+A2: 2010-05
EN 60825-1: 2008-05
IEC 60825-1: 2007-03
LED Class 1
EN 60825-1: 2008-05
IEC 60825-1: 2007-03
LED Class 1