Leica DM100 Manuel D’Utilisation

 

For safety reasons, the power cable 
is grounded via the microscope base. 

Never use an adapter between the power cable 
and the power supply; that would render the 
grounding ineffective.

 

Always use the microscope on a hard, 
stable surface. 

1.  Attach the power cable to the rear side of 

the microscope.

2.  Set the illumination to the lowest setting 

using the controller on the bottom left of 
the stand.

3.  Switch on the microscope using the toggle 

switch on the rear side of the stand.