Leica DM4000B Manuel D’Utilisation
27
5. Assembly
ICT/P transmitted light polarizer
• Using the left clamping screw, fasten the ICT/P
transmitted light polarizer to the underside of
the condenser holder (Fig. 27).
the condenser holder (Fig. 27).
• Make sure that the red index point on the front
of the polarizer is aligned with 0.
• If necessary, insert the compensators (
λ
- and
λ
/4 plates) into the polarizer’s receptacle
(Fig. 28).
Incident light polarizers:
R/P polarizer, rotating polarizer
L/ICR, R/ICR polarizer
• Remove the plug cap on the right side of the
incident light axis (Fig. 29).
• Insert the polarizer into the receptacle until it
latches in place.
Motorized polarizer
• A motorized polarizer is already installed and
ready for operation in the DIC condenser.
Transmitted light and incident light analyzer
Transmitted light and incident light analyzer
Fig. 27
Assembly of the ICT/P transmitted light polarizer
1
Clamping screw
Fig. 28
Inserting the compensators
Fig. 29
Inserting the polarizer
1
The plug cap is replaced with the polarizer.
1
1