Leica DM4000B Manuel D’Utilisation
46
7. Operation
Fig. 58
Revolving object stage
1 Object motion (Y direction)
2 Object motion (X direction)
3 Torque adjustment (Y direction)
4 Torque adjustment (X direction)
5 Focus dial for fine focusing
2 Object motion (X direction)
3 Torque adjustment (Y direction)
4 Torque adjustment (X direction)
5 Focus dial for fine focusing
7. Operation
7.1 Switching on the Microscope
When using a gas discharge lamp, the ebq 100
external supply unit must be turned on
separately (56.1).
Then switch-on the microscope at the power
switch.
All motorized microscope components first un-
dergo an initialization phase.
After the initialization is complete, the display on
the stand (Fig. 57) shows the current microscope
setting.
external supply unit must be turned on
separately (56.1).
Then switch-on the microscope at the power
switch.
All motorized microscope components first un-
dergo an initialization phase.
After the initialization is complete, the display on
the stand (Fig. 57) shows the current microscope
setting.
Fig. 57
Display after initialization
7.2 Stages and Specimen Displacement
Lengthening the coaxial pinion
• For lengthening, pull the lower grip (58.2)
downwards. Repeat with the upper grip (58.1).
Torque adjustment
The torque is already optimally set at the factory,
however, it can be individually adjusted using
two knurled rings (58.3, 58.4).
however, it can be individually adjusted using
two knurled rings (58.3, 58.4).
1
2
Fig. 56
Front view of the ebq 100 supply unit
1 Power switch
2 Lamp status
2 Lamp status
1
2
2
5
3
4