Leica DM1000 LED Manuel D’Utilisation

16

!

Specimen stage with specimen holder

Lock screws for specimen holder

The microscope components are logically as-
sembled in this order:

• Stage
• Condenser
• Fluorescence illuminator*
• Intermediate systems*
• Tube
• Eyepieces
• Objectives
• Lamp housings with light sources*
• Polarization equipment*

Only one commonly used screwdriver is
necessary for assembly, which is included in the
delivery package.
The tool can be stored on a magnetic retainer
on the underside of the stage at the right.
When using intermediate systems and optical
accessories, the sequence may vary.
In this case, read Chapter
"6.9 Optional Accessories" →

 

p. 25.

Before completing the stage, make sure no ob-
jectives are installed!
Remove the srew located under the stage in the
front.

• Place the specimen holder on the stage and

fasten it with the two screws (3.1)

The coaxial pinion can be mounted on the left-
or right-hand side.

• First, place the flat fine focus wheel on the

side to which you intend to mount the coaxial
pinion; the wheel is held in place magnetically
(4.1);  ensure that the button snaps into place.
Attach the other focus knob on the opposite side

• Loosen the lock screw (5.1) at the front left-

hand side of the stage

• Slide the stage as far back as possible

• Attach the coaxial pinion with the srew (6.1)

• Return the stage to the starting position and

retighten the lock screw; after installation of
the stage control, move object guide all the
way to the left side of the instrument; keep
turning when guide has reached the end of
travel until a click noise is heard

1

6. Assembling the Microscope