Leica DM1000 LED Manuel D’Utilisation

44

• Insert a transmitted light specimen

• Rotate an appropriate objective into place

• Bring the image into focus using the focus dial

and set the brightness

• Condenser UCL/P:

Click the condenser disk into the BF position
Condensers CL/PH, CLP/PH, and
APL .ACHR.0.9 (P):
Pull out the DF  light ring slide as far as the
stop;
check the Köhler illumination (→

 

p. 28)

• Open the aperture diaphragm  completely

(position PH)

• Condenser UCL/P:

Click the condenser disk into the DF position
Condensers CL/PH, CLP/PH, and
APL.ACHR.0.9 (P):
Insert the DF light ring slide as far as the stop

Condensers UCL/UCLP and UCA/P: The DF light
ring must be centered (→

 

p. 29).

Special dark field condensers* are available for
the DM1000/DM1000 LED.
The application potential of the DF condensers
depends on the aperture of the objective in use.
For objectives with built-in iris diaphragm, the
aperture can be adapted.

D 0.80 - 0.95

0.75

D 1.20 - 1.44 OIL

1.10

• Insert a transmitted light specimen

• Rotate an appropriate objective into place;

objectives that are suitable for phase contrast
are engraved with PH

• Bring the image into focus using the focus dial

and set the brightness

• For an optimal field diaphragm setting, check

the Köhler illumination (→

 

p. 28)

• Open the aperture diaphragm  completely

(position PH)

• Condensers UCL/UCLP and UCA/P:

Set the light ring corresponding to the
objective on the condenser disk
Example: Light ring 1 belongs to the objective
with the engraving PH 1
Condensers CL/PH, CLP/PH, and
APL. ACHR.0.9 (P):
Use the light ring slide

Condensers UCL/UCLP and UCA/P: Light rings
must be centered (→

 

p. 29).