Leica DMI3000B Manuel D’Utilisation
42
6. Assembly
Fig. 42
Installation of condenser heads S1
1
Condenser base
2
Spacer ring
3
Condenser head
Fig. 43
Installation of condenser head S28
Condenser heads
Four different condenser heads are available:
1)
S1/1.40 oil
2)
S1/0.90 dry
3)
S23/0.53
4)
S28/0.55
Condenser heads 3 and 4 are screwed directly
into the condenser body. A spacer ring (42.2)
must be screwed into the thread at the bottom of
the condenser body prior to installing condenser
heads 1 and 2. The S1 condenser heads fit into
this ring.
into the condenser body. A spacer ring (42.2)
must be screwed into the thread at the bottom of
the condenser body prior to installing condenser
heads 1 and 2. The S1 condenser heads fit into
this ring.
The S70 condenser is delivered complete with a
condenser head, making additional assembly
unnecessary.
condenser head, making additional assembly
unnecessary.
1
2
3
Fig. 41
Condenser on transmitted-light illumination arm