Leica DM750 Manuel D’Utilisation
Leica DM750
Manual
32
If you have purchased a standard Leica
DM750 configuration, the condenser has
DM750 configuration, the condenser has
already been pre-centered by Leica Microsys-
tems.
tems.
1. Open the condenser aperture by rotating
the knurled ring on the condenser to the
right.
right.
Make sure that the condenser is in the
highest position.
highest position.
2. Write an "X" on a piece of paper in the size
of a business card and place it onto the
light output of the microscope stand in
such a way that the "X" is centered over the
illumination.
light output of the microscope stand in
such a way that the "X" is centered over the
illumination.
3. Look at the X through the eyepieces and
center it in the field of view by tightening
the setscrews with the tool included in the
delivery package (or, for a Leica DM750
with Koehler illumination, tighten the
knurled screws).
the setscrews with the tool included in the
delivery package (or, for a Leica DM750
with Koehler illumination, tighten the
knurled screws).
Complete Condenser Centering
Not centered
Centered