Leica DM750 Manuel D’Utilisation
Leica DM750
Manual
46
General maintenance
Storage and handling
Always use both hands to carry the
microscope. There is a handle on the
microscope. There is a handle on the
back of the microscope and an undercut in the
front for this purpose.
front for this purpose.
Ϙ
The cord wrap allows you to wrap the cord
in such a way that only the length you need
is extended.
in such a way that only the length you need
is extended.
Ϙ
Keep all optical components clean. Clean-
liness is important for maintaining good
optical performance.
liness is important for maintaining good
optical performance.
Ϙ
The microscope should always be covered
with the plastic dust cover (provided with
the instrument) when it is not in use.
with the plastic dust cover (provided with
the instrument) when it is not in use.
Instructions for cleaning
Ϙ
If any optical surface becomes coated with
dust or dirt, clean the surface by blowing it
off with a syringe or brushing it off with a
camel hair brush before attempting to wipe
the surface clean.
dust or dirt, clean the surface by blowing it
off with a syringe or brushing it off with a
camel hair brush before attempting to wipe
the surface clean.
Ϙ
Optical surfaces should be cleaned using
a lint-free cloth, lens cloth or cotton swab
moistened with a commercially available
glass cleaner.
a lint-free cloth, lens cloth or cotton swab
moistened with a commercially available
glass cleaner.
Ϙ
It is very important to avoid the excessive
use of solvents, so use them sparingly. The
lint-free cloth, lens tissue or cotton swab
should be moistened with solvent, but
not be wet enough for the solvent to seep
around the lens.
use of solvents, so use them sparingly. The
lint-free cloth, lens tissue or cotton swab
should be moistened with solvent, but
not be wet enough for the solvent to seep
around the lens.