Leica DM500 B Manuel D’Utilisation
Leica DM 500, DM500 B
Manual
37
General
•
Always carry the microscope using two
hands. There is a handle on the back of
hands. There is a handle on the back of
the microscope and an undercut in the front for
this purpose.
this purpose.
Ϙ
The cord wrap allows you to wrap the cord
in such a way that only the length you need
is extended.
in such a way that only the length you need
is extended.
Ϙ
Keep all optical components clean. Clean-
liness is important for maintaining good
optical performance.
liness is important for maintaining good
optical performance.
Ϙ
The microscope should always be covered
with the plastic dust cover (provided with
the instrument) when it is not in use.
with the plastic dust cover (provided with
the instrument) when it is not in use.
Ϙ
If any optical surface becomes coated with
dust or dirt, clean the surface by blowing it
off with a syringe or brushing it off with a
camel hair brush before attempting to wipe
the surface clean.
dust or dirt, clean the surface by blowing it
off with a syringe or brushing it off with a
camel hair brush before attempting to wipe
the surface clean.
Ϙ
Optical surfaces should be cleaned with a
lint-free cloth, lens tissue or a cotton swab
moistened with methanol or a commer-
cially available glass cleaner. Do not use
alcohol.
lint-free cloth, lens tissue or a cotton swab
moistened with methanol or a commer-
cially available glass cleaner. Do not use
alcohol.
Ϙ
It is very important to avoid the excessive
use of solvents, so use them sparingly. The
lint-free cloth, lens tissue or cotton swab
should be moistened with solvent, but
not be wet enough for the solvent to seep
around the lens.
use of solvents, so use them sparingly. The
lint-free cloth, lens tissue or cotton swab
should be moistened with solvent, but
not be wet enough for the solvent to seep
around the lens.
General maintenance