Leica DM500 B Manuel D’Utilisation

The Leica DM500 and DM500 B microscopes are 
optical instrument which use magnification and 
illumination to improve the visibility of objects. 
It is used for observing and documenting.

The Leica DM500 and DM500 B microscopes 
may be used only in closed rooms and must be 
placed on a solid floor.

The Leica DM500 or DM500 B microscopes can 
be used in clean rooms without any problems.

• 

Position the Leica DM500 or 
DM500 B microscope so that it can be 

disconnected from the power supply at any 
time. The power cord must remain accessible at 
all times, because the power supply is foreseen 
as mains disconnecting device.

Only use the instruments in closed, dust free 
rooms and between +10 °C and +40 °C. Protect 
the devices from oil, chemicals and extreme 
humidity. If using the devices outdoors, protect 
them from dust and moisture. Never use electri-
cal devices outdoors. Install electrical devices at 
least 10 cm from the wall and away from flam-
mable substances.

Avoid large temperature fluctuations, direct 
sunlight and vibrations. These conditions 
can distort measurements and micrographic 
images.

 

In warm and warm-damp climatic zones, 
the individual components require 

special care in order to prevent the build-up of 
fungus. 

• 

Using the instrument in any way 
contrary to the specifications in the user 

manual can lead to bodily harm and damage to 
objects. Doing so can impair the functions of 
the protective measures provided.

 

Never install any other plug (NEMA 
5-15P) or unscrew any mechanical 

components unless expressly instructed to do 
so in the instructions. 

 

CAUTION: Risk of explosion if battery is 
replaced by an incorrect type. Dispose 

of used batteries according to the instructions.

 

The devices and accessories described in 
this operating manual have been tested 

for safety and potential hazards.