Pelco C761M-A Fascicule
Worldwide Headquarters • 3500 Pelco Way • Clovis, California 93612 USA • www.pelco.com
USA & Canada • Tel: 800/289-9100 • Fax: 800/289-9150
International • Tel: 1-559/292-1981 • Fax: 1-559/348-1120
Routine Servicing
Never touch the surface of the lens.
Remove dust from the lens using a soft brush or clean compressed air. Avoid touching the lens surface during handling.
To remove fingerprints or oil stains from the lens surface, use lens cleaning paper or a clean cotton cloth with a little cleaning liquid. Then, wipe off the
stains using a light circular motion, starting from the center of the lens surface. Wipe the lens body with a silicon cloth. Do not use any organic solvents such
as thinner or benzene.
stains using a light circular motion, starting from the center of the lens surface. Wipe the lens body with a silicon cloth. Do not use any organic solvents such
as thinner or benzene.
Lens and Connector Wiring Diagrams
Specifications
13VDIR2.8-11
13VDIR3-8.5
13VDIR7.5-50
Type
Varifocal Infrared
Varifocal Infrared
Varifocal Infrared
Format Size
1/3-inch
1/3-inch
1/3-inch
Mount Type
CS
CS
CS
Focal Length
2.8~11mm
3~8.5 mm
7.5~50 mm
Zoom Ratio
3.9X
2.8X
6.7X
Relative Aperture (F)
1.4~2.6
1.0~1.6
1.3~1.8
Operation
Iris
Auto (Direct Drive)
Auto (Direct Drive)
Auto (Direct Drive)
Focus Manual
Manual
Manual
Zoom
Manual
Manual
Manual
Angle of View
Diagonal
32.7°~123.2°
41.9°~114.1°
7.00°~46.2°
Horizontal
26.2°~97.4°
33.6°~90.5°
5.64°~36.6°
Vertical
19.7°~72.4°
25.2°~67.2°
4.26°~27.4°
Minimum Object Distance
0.3 m
0.2 m
0.4 m
Back Focal Length
8.66~18.69 mm
7.94~13.96 mm
9.61~11.96 mm
Operating Temperature
-4° to 140°F
14° to 122°F
14° to 122°F
(-20° to 60°C)
(-10° to 50°C)
(-10° to 50°C)
Unit Weight
0.18 lb (0.08 kg)
0.12 lb (0.05 kg)
0.15 lb (0.07 kg)
Shipping Weight
1 lb (0.45 kg)
1 lb (0.45 kg)
1 lb (0.45 kg)
(Design and product specifications subject to change without notice.)
REVISION HISTORY
Manual #
Date
Comments
C761M
11/06
Original version.
C761M-A
4/08
Added 13VDIR2.8-11 lens and specifications for all the lenses.
Pelco, the Pelco logo, and B.O.S.S. are registered trademarks of Pelco, Inc.
©Copyright 2008, Pelco, Inc. All rights reserved.
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union
regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.
regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.
Pelco VDIR Type Lenses
RED
BLACK
YELLOW
G IRIS
4 -CONDUCTOR
CABLE
4-PIN SQUARE CONNECTOR
3
4
2
TO CAMERA AUTO IRIS SOCKET, DC DRIVE
AUTO IRIS PLUG PIN-OUT
(REAR OF PLUG, SOLDER LUGS)
4 2
3 1
1
DRIVE ( + )
DRIVE ( – )
CONTROL ( – )
CONTROL ( + )
GREEN