Planet Technology FT-902S50 Manuel D’Utilisation
-12-
3.2.2 Login the media converter
Before you start configure the FT-90X, please note the FT-90X is configured through an Ethernet connection, make sure
the manager PC must be set on same the IP subnet address. For example, the default IP address of the FT-90X is
the manager PC must be set on same the IP subnet address. For example, the default IP address of the FT-90X is
192.168.0.100
, then the manager PC should be set at 192.168.0.x (where x is a number between 2 and 254), and the
default subnet mask is 255.255.255.0. Use Internet Explorer 6.0 or above Web browser. Enter IP address
http://192.168.0.100
(the factory-default IP address) to access the Web interface.
When the following login screen appears, please enter the default username and password (default user name and
password is "admin"). Press Login to enter the main screen of FT-90X. The login screen in Figure 3-1 appears.
password is "admin"). Press Login to enter the main screen of FT-90X. The login screen in Figure 3-1 appears.
Figure 3-1
Login screen
#
Note
:
1. For security reason, please change and memorize the new password after this first setup.
2. Only accept command in lowercase letter under web interface.