Eaton Electrical SC200 Manuel D’Utilisation
Commissioning
4-6
Copyright © 2005-2006 Eaton Corporation. All Rights Reserved.
IPN 997-00012-41D December 2006
Step 3 – Check through the loaded configuration and make changes as required
Check through the loaded configuration in DCTools by clicking on the hotlinks
at the top of the DCTools System Summary (Home) screen and make changes as
required.
at the top of the DCTools System Summary (Home) screen and make changes as
required.
The DCTools System Summary (Home) screen below shows the main
configuration hotlinks, followed by a list of what can be configured under each
hotlink.
configuration hotlinks, followed by a list of what can be configured under each
hotlink.
Hotlink
Click to …
Configuration
Enter site specific information and synchronize the SM45
real-time clock with the internal UTC time of your PC under
Identity
real-time clock with the internal UTC time of your PC under
Identity
Set up Ethernet communications and SNMP traps under
Communications, and sysObjectID under SNMP
Communications, and sysObjectID under SNMP
Alarms
Configure system alarms (see Example 1)
Analogs
Configure analog inputs, current inputs and external analog
inputs
inputs
Digitals
Set-up user alarms
Relays
Toggle relay states when performing a Relay Test and
configure external digital inputs
configure external digital inputs
Control
Configure the settings of control functions such as Manual
Equalize, Temperature Compensation, Battery Test, Fast
Charge, Battery Current Limit and Active Voltage Control.
Equalize, Temperature Compensation, Battery Test, Fast
Charge, Battery Current Limit and Active Voltage Control.
LVD
Enable/disable LVD(s) and to configure the LVD settings
Rectifiers
Configure rectifier settings