iHome iDM14 Manuel D’Utilisation

1. Move the Travel Lock/Aux/Bluetooth Switch to the Bluetooth position to listen to audio  

  streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device.

2. Connect the Left and Right speakers using the 3.5 mm stereo connection cable.

3. Press and release the     Button to turn on the unit. The blue     light will flash as the unit  

  searches for a previously paired device, and then turn solid blue when a previously paired  

  device is detected.

4. Press and release the        Button to play or pause audio from your Bluetooth device. 

    NOTE: Play/Pause only works in Bluetooth mode. It does not control aux line-in devices. 

5. Use the Volume +/- Buttons to adjust volume.

6. When done listening, press the    Button to turn the unit off.

P9

5

1.  Move the Travel Lock/Aux/Bluetooth Switch to the Bluetooth position to use the speakers as a  

  speakerphone for a linked Bluetooth-capable phone during an incoming or active call. The right speaker  

  (which contains the speakerphone mic) is muted during a speakerphone call; only the left speaker emits  

 audio.

2.  Connect the Left and Right speakers using the 3.5 mm stereo connection cable.

   Speakerphone cannot operate unless both speakers are connected together.

3. Press and hold the      Button to turn on the unit (release when blue light appears).

4. Use the Volume +/- Buttons to adjust volume. You may wish to adjust the volume on your audio device,  

 too.

5. When a call is received, playing music is muted to hear the ring tone. Press the green 

       

Button to  

  answer the call, or press the red      Button to ignore it.

6. When the call is completed, press the      Button or        Button to end the call and resume previous  

 function.