Manuels d'utilisation pour Avaya Bogen PCM Paging Control System

Table des matières

• Table of Contents

  3
• 1. Introduction

  5
  • 1.1. Voice Channel

    5
  • 1.2. Background Music

    6
  • 1.3. Signaling Channel

    6
  • 1.4. Other Features

    6
• 2. Before You Start

  7
  • 2.1. Select Options

    7
  • 2.2. Package Contents

    7
• 3. Installation

  9
  • 3.1. Adding PCMZPM Modules

    9
  • 3.2. Mounting the PCM System

    9
  • 3.2.1. Wall Mounting

    9
  • 3.2.2. Rack Mounting

    9
• 4. LUPCMALL Feature Callouts

  11
  • Descriptions and Locations

    11
• 5. System Wiring Connections

  13
  • 5.1. Telephone System Connections

    13
  • 5.2. PBX Loop Start Trunk Port

    13
  • 5.3. PBX Ground Start Trunk Port

    14
  • 5.4. PBX Page Port

    15
  • 5.5. PBX Analog Station Port

    15
  • 5.6. Night Ringer

    16
  • 5.7. Over Ride Input

    17
• 6. Paging Amplifier Connections

  19
• 7. Background Music

  21
  • 7.1. Helpful Hints When Connecting Background Music to the Paging Control System

    21
  • 7.2. Background Music Continuously Supplied To All Zones Not Being Paged

    23
  • 7.3. Background Music Supplied By Same Amplifier That Supplies Paging, Music Input Available On Amplifier

    23
  • 7.4. Background Music Supplied by Same Amplifier Supplying Paging, No Dedicated Music Input Available On Amplifier

    23
  • 7.5. Background Music Or Different Background Music Supplied To A Select Group Of Zones

    23
  • 7.5.1. Zone Modules Working With 70V Speakers

    23
  • 7.5.2. Zone Modules Working With Self-Amplified Speakers

    23
  • 7.6. Inhibiting Background Music In Select Zones

    23
• 8. Zone Speaker Wiring and Setup

  29
  • 8.1. Wiring to 70V Speakers

    29
  • 8.2. Wiring to Self-Amplified Speaker or Dedicated Amplifier

    29
  • 8.3. Setting a Zone for Talk Back Operation

    29
• 9. Optional Wiring

  33
  • 9.1. CPU to Emergency Signaling

    33
  • 9.2. CPU to Re-Synch (Master Clock)

    33
  • 9.3. Relay Drivers

    33
• 10. Power-Up of PCM and Associated Equipment

  35
  • 10.1. Power-Up Sequence

    35
  • 10.2. Priority Order

    35
• 11. System Programming

  37
  • 11.1. Programming Paging Zone Groups

    38
  • 11.1.1. To Erase A Zone Paging or Signaling Group

    38
  • 11.2. Programming Signaling Zone Groups

    38
  • 11.3. Interface Default Timer

    38
  • 11.4. Interface VOX Timer

    38
  • 11.5. Dialing Timeout

    38
  • 11.6. Single Amp BGM Enable

    39
  • 11.7. Programming the Real Time Clock

    39
  • 11.7.1. Clock Synchronization

    39
  • 11.8. Time-Triggered Events

    39
  • 11.9. Setup Tone

    39
  • 11.10. Reset Default Values

    39
  • 11.11. Relay Contacts

    40
• 12. Feature Codes and Defaults

  41
• 13. Paging: How To Use The PCM

  45
  • 13.1. Paging Zones

    45
  • 13.2. How To Page Zones

    45
  • 13.3. How To Make An All-Call Page

    45
  • 13.4. How To Page A Zone Group

    45
  • 13.5. How To Make A Code Call

    46
  • 13.6. How To Make A Pattern Code Call

    46
  • 13.7. How To Make An Echo Code Call

    47
• 14. Testing and Troubleshooting

  49
  • Functional Test Guide

    49
    • Procedure A

      50
    • Procedure B

      50
• A. Applications

  53
  • Typical Connections

    53
  • Connecting to an External Audio Source

    53
• B. Tones

  59
• C. Glossary of Programmable Features

  61
• D. Configuration Forms

  63