Manuels d'utilisation pour DELL 8132

DELL

Manuel D’Utilisation (English)

Manuel D’Utilisation

Table des matières

Command Groups
77
- Introduction
  77
- Command Groups
  77
- Mode Types
  81
- Layer 2 Commands
  83
  - AAA
    83
  - Administrative Profiles
    84
  - ACL
    85
  - Address Table
    86
  - Auto-VoIP
    87
  - CDP Interoperability
    87
  - DHCP L2 Relay
    88
  - DHCP Management Interface
    88
  - DHCP Snooping
    89
  - Dynamic ARP Inspection
    90
  - E-mail Alerting
    91
  - Ethernet Configuration
    92
  - Ethernet CFM
    93
  - GVRP
    94
  - IGMP Snooping
    95
  - IGMP Snooping Querier
    96
  - IP Addressing
    96
  - IPv6 ACL
    98
  - IPv6 MLD Snooping
    98
  - IPv6 MLD Snooping Querier
    99
  - IP Source Guard
    99
  - iSCSI Optimization
    100
  - Link Dependency
    100
  - LLDP
    101
  - Multicast VLAN Registration
    102
  - Port Channel
    102
  - Port Monitor
    103
  - QoS
    103
  - Radius
    108
  - Spanning Tree
    110
  - TACACS+
    111
  - VLAN
    112
  - 802.1x
    114
- Data Center Technology Commands
  117
- Layer 3 Commands
  119
  - ARP (IPv4)
    119
  - DHCP Server and Relay Agent (IPv4)
    120
  - DHCPv6
    121
  - DVMRP
    122
  - IGMP
    123
  - IGMP Proxy
    124
  - IP Helper/DHCP Relay
    125
  - IP Routing
    126
  - IPv6 Routing
    127
  - Loopback Interface
    130
  - Multicast
    130
  - IPv6 Multicast
    132
  - OSPF
    134
  - OSPFv3
    138
  - Router Discovery Protocol
    141
  - Routing Information Protocol
    142
  - Tunnel Interface
    143
  - Virtual Router Redundancy
    144
- Utility Commands
  146
  - Auto-Install
    146
  - Captive Portal
    146
  - CLI Macro
    149
  - Clock
    149
  - Command Line Configuration Scripting
    150
  - Denial of Service
    151
  - Line
    152
  - Management ACL
    153
  - Mode
    153
  - Password Management
    153
  - PHY Diagnostics
    155
  - RMON
    155
  - SDM Templates
    156
  - Serviceability Tracing
    156
  - sFlow
    158
  - SNMP
    158
  - SSH
    159
  - Syslog
    160
  - System Management
    161
  - Telnet Server
    164
  - Terminal Length
    164
  - Time Ranges
    165
  - USB Flash Drive
    165
  - User Interface
    165
  - Web Server
    166
Using the CLI
167
- Introduction
  167
- Entering and Editing CLI Commands
  167
  - History Buffer
    168
  - Negating Commands
    169
  - Show Command
    169
  - Command Completion
    170
  - Short Form Commands
    170
  - Keyboard Shortcuts
    170
  - Parameters
    171
  - Operating on Multiple Objects (Range)
    172
  - Command Scripting
    173
  - CLI Command Notation Conventions
    173
  - Interface Naming Conventions
    174
  - Examples
    176
- CLI Command Modes
  177
- Starting the CLI
  190
  - Easy Setup Wizard
    191
- Using CLI Functions and Tools
  198
  - Configuration Management
    198
  - Management Interface Security
    200
  - Management ACL
    203
  - Other CLI Tools and Capabilities
    204
Layer 2 Switching Commands
235
AAA Commands
237
- TACACS+ Accounting
  238
  - Accounting Method Lists
    239
  - Access Line Modes
    239
- Commands in this Chapter
  239
- aaa authentication dot1x default
  240
  - Syntax
    240
  - Parameter Description
    240
  - Default Configuration
    240
  - Command Mode
    241
  - User Guidelines
    241
  - Example
    241
- aaa authentication enable
  241
  - Syntax
    241
  - Default Configuration
    242
  - Command Mode
    242
  - User Guidelines
    242
  - Example
    243
- aaa authentication login
  243
  - Syntax
    243
  - Default Configuration
    244
  - Command Mode
    244
  - User Guidelines
    244
  - Example
    245
- aaa authorization
  245
  - Syntax
    245
  - Parameter Description
    245
  - Default Configuration
    246
  - Command Mode
    246
  - User Guidelines
    247
- aaa authorization network default radius
  247
  - Syntax
    247
  - Default Configuration
    248
  - Command Mode
    248
  - User Guidelines
    248
  - Example
    248
- aaa ias-user username
  248
  - Syntax
    248
  - Parameter Description
    248
  - Default Configuration
    248
  - Command Mode
    249
  - User Guidelines
    249
  - Examples
    249
- aaa new-model
  249
  - Syntax
    249
  - Parameter Description
    249
  - Default Configuration
    249
  - Command Mode
    249
  - User Guidelines
    249
  - Example
    250
- clear (IAS)
  250
  - Syntax
    250
  - Parameter Description
    250
  - Default Configuration
    250
  - Command Mode
    250
  - User Guidelines
    250
  - Example
    250
- authorization
  250
  - Syntax
    251
  - Parameter Description
    251
  - Default Configuration
    251
  - Command Mode
    251
  - User Guidelines
    251
  - Examples
    251
- enable authentication
  252
  - Syntax
    252
  - Default Configuration
    252
  - Command Mode
    252
  - User Guidelines
    252
  - Example
    252
- enable password
  253
  - Syntax
    253
  - Default Configuration
    253
  - Command Mode
    253
  - User Guidelines
    253
  - Example
    253
- ip http authentication
  254
  - Syntax
    254
  - Default Configuration
    254
  - Command Mode
    254
  - User Guidelines
    254
  - Example
    254
- ip https authentication
  255
  - Syntax
    255
  - Parameter Description
    255
  - Default Configuration
    255
  - Command Mode
    255
  - User Guidelines
    255
  - Example
    256
- login authentication
  256
  - Syntax
    256
  - Default Configuration
    256
  - Command Mode
    256
  - User Guidelines
    256
  - Example
    256
- password (aaa IAS User Configuration)
  257
  - Syntax
    257
  - Parameter Description
    257
  - Default Configuration
    257
  - Command Mode
    257
  - User Guidelines
    257
  - Example
    257
- password (Line Configuration)
  258
  - Syntax
    258
  - Default Configuration
    258
  - Command Mode
    258
  - User Guidelines
    258
  - Example
    258
- password (User EXEC)
  259
  - Syntax
    259
  - Parameter Description
    259
  - Default Configuration
    259
  - Command Mode
    259
  - User Guidelines
    259
  - Example
    259
- show aaa ias-users
  260
  - Syntax
    260
  - Parameter Description
    260
  - Default Behavior
    260
  - Command Mode
    260
  - User Guidelines
    260
  - Example
    260
- show aaa statistics
  261
  - Syntax
    261
  - Default Configuration
    261
  - Command Mode
    261
  - User Guidelines
    261
  - Examples
    261
- show authentication methods
  262
  - Syntax
    262
  - Default Configuration
    262
  - Command Mode
    262
  - User Guidelines
    262
  - Example
    262
- show authorization methods
  263
  - Syntax
    263
  - Default Configuration
    263
  - Command Mode
    263
  - User Guidelines
    263
  - Example
    263
- show users accounts
  264
  - Syntax
    264
  - Parameter Description
    264
  - Default Configuration
    265
  - Command Mode
    265
  - User Guidelines
    265
  - Example
    265
- show users login-history
  266
  - Syntax
    266
  - Default Configuration
    266
  - Command Mode
    266
  - User Guidelines
    266
  - Example
    266
- username
  267
  - Syntax
    267
  - Parameter Description
    267
  - Default Configuration
    268
  - Command Mode
    268
  - User Guidelines
    268
  - Example
    269
- username unlock
  269
  - Syntax
    270
  - Parameter Description
    270
  - Default Configuration
    270
  - Command Mode
    270
  - User Guidelines
    270
Administrative Profiles Commands
271
- Overview
  271
  - RADIUS and TACACS+
    272
- Commands in this Chapter
  272
- admin-profile
  273
  - Syntax
    273
  - Parameter Description
    273
  - Default Configuration
    273
  - Command Mode
    273
  - User Guidelines
    273
  - Example
    273
- description (Administrative Profile Config)
  274
  - Syntax
    274
  - Parameter Description
    274
  - Default Configuration
    274
  - Command Mode
    274
  - User Guidelines
    274
  - Example
    274
- rule
  275
  - Syntax
    275
  - Parameter Description
    275
  - Default Configuration
    275
  - Command Mode
    275
  - User Guidelines
    275
  - Example
    275
- show admin-profiles
  276
  - Syntax
    276
  - Parameter Description
    276
  - Default Configuration
    276
  - Command Mode
    276
  - User Guidelines
    276
  - Example
    277
- show admin-profiles brief
  277
  - Syntax
    277
  - Parameter Description
    277
  - Default Configuration
    277
  - Command Mode
    277
  - User Guidelines
    277
  - Example
    278
- show cli modes
  278
  - Syntax
    278
  - Default Configuration
    278
  - Command Mode
    278
  - User Guidelines
    278
  - Example
    278
ACL Commands
281
- ACL Logging
  281
  - How to Build ACLs
    282
- Commands in this Chapter
  284
- access-list
  284
  - Parameter Description
    285
  - Default Configuration
    285
  - Command Mode
    286
  - User Guidelines
    286
  - Examples
    286
- deny | permit (IP ACL)
  286
  - Syntax
    286
  - Parameter Description
    287
  - Default Configuration
    287
  - Command Mode
    287
  - User Guidelines
    287
- deny | permit (Mac-Access-List-Configuration)
  288
  - Syntax
    288
  - Parameter Description
    289
  - Default Configuration
    290
  - Command Mode
    290
  - User Guidelines
    290
  - Example
    290
- ip access-group
  290
  - Syntax
    290
  - Default Configuration
    291
  - Command Mode
    291
  - User Guidelines
    291
  - Examples
    291
- mac access-group
  291
  - Syntax
    291
  - Default Configuration
    292
  - Command Mode
    292
  - User Guidelines
    292
  - Example
    292
- mac access-list extended
  292
  - Syntax
    292
  - Default Configuration
    293
  - Command Mode
    293
  - User Guidelines
    293
  - Example
    293
- mac access-list extended rename
  293
  - Syntax
    293
  - Default Configuration
    293
  - Command Mode
    294
  - User Guidelines
    294
  - Example
    294
- service-acl input
  294
  - Syntax
    294
  - Parameter Description
    294
  - Default Configuration
    295
  - Command Mode
    295
  - User Guidelines
    295
- show service-acl interface
  295
  - Syntax
    295
  - Parameter Description
    295
  - Default Configuration
    295
  - Command Mode
    295
  - User Guidelines
    295
  - Example
    296
- show ip access-lists
  296
  - Syntax
    296
  - Parameter Description
    296
  - Examples
    297
- show mac access-list
  297
  - Syntax
    297
  - Parameter Description
    297
  - Default Configuration
    297
  - Command Mode
    297
  - User Guidelines
    297
  - Example
    298
Address Table Commands
299
- Commands in this Chapter
  300
- clear mac address-table
  300
  - Syntax
    300
  - Parameter Description
    300
  - Default Configuration
    301
  - Command Mode
    301
  - User Guidelines
    301
  - Example
    301
- mac address-table aging-time
  301
  - Syntax
    301
  - Parameter Description
    301
  - Default Configuration
    301
  - Command Mode
    302
  - User Guidelines
    302
  - Example
    302
- mac address-table multicast forbidden address
  302
  - Syntax
    302
  - Parameter Description
    302
  - Default Configuration
    303
  - Command Mode
    303
  - User Guidelines
    303
  - Examples
    303
- mac address-table static vlan
  303
  - Syntax
    303
  - Syntax Description
    304
  - Default Configuration
    304
  - Command Mode
    304
  - User Guidelines
    304
  - Example
    304
- port security
  304
  - Syntax
    305
  - Default Configuration
    305
  - Command Mode
    305
  - User Guidelines
    305
  - Example
    305
- port security max
  305
  - Syntax
    305
  - Default Configuration
    306
  - Command Mode
    306
  - User Guidelines
    306
  - Example
    306
- show mac address-table multicast
  306
  - Syntax
    306
  - Default Configuration
    306
  - Command Mode
    307
  - User Guidelines
    307
  - Example
    307
- show mac address-table
  307
  - Syntax
    307
  - Parameter Description
    308
  - Default Configuration
    308
  - Command Mode
    308
  - User Guidelines
    308
  - Example
    308
- show mac address-table address
  309
  - Syntax
    309
  - Parameter Description
    309
  - Default Configuration
    309
  - Command Mode
    309
  - User Guidelines
    309
  - Example
    309
- show mac address-table count
  310
  - Syntax
    310
  - Parameter Description
    310
  - Default Configuration
    310
  - Command Mode
    310
  - User Guidelines
    310
  - Example
    310
- show mac address-table dynamic
  311
  - Syntax
    311
  - Parameter Description
    311
  - Default Configuration
    311
  - Command Mode
    311
  - User Guidelines
    311
  - Example
    311
- show mac address-table interface
  312
  - Syntax
    312
  - Parameter Description
    312
  - Default Configuration
    312
  - Command Mode
    312
  - User Guidelines
    312
  - Example
    313
- show mac address-table static
  313
  - Syntax
    313
  - Parameter Description
    313
  - Default Configuration
    314
  - Command Mode
    314
  - User Guidelines
    314
  - Example
    314
- show mac address-table vlan
  314
  - Syntax
    314
  - Parameter Description
    314
  - Default Configuration
    315
  - Command Mode
    315
  - User Guidelines
    315
  - Example
    315
- show ports security
  315
  - Syntax
    316
  - Default Configuration
    316
  - Command Mode
    316
  - User Guidelines
    316
  - Example
    316
- show ports security addresses
  317
  - Syntax
    317
  - Default Configuration
    317
  - Command Mode
    317
  - User Guidelines
    317
  - Examples
    317
Auto-VoIP Commands
319
- Commands in this Chapter
  319
- show switchport voice
  320
  - Syntax
    320
  - Default Configuration
    320
  - Command Mode
    320
  - User Guidelines
    320
  - Examples
    320
- switchport voice detect auto
  323
  - Syntax
    323
  - Default Configuration
    323
  - Command Mode
    323
  - User Guidelines
    323
  - Example
    323
CDP Interoperability Commands
325
- Commands in this Chapter
  325
- clear isdp counters
  325
  - Syntax
    325
  - Default Configuration
    325
  - Command Mode
    325
  - User Guidelines
    326
  - Example
    326
- clear isdp table
  326
  - Syntax
    326
  - Default Configuration
    326
  - Command Mode
    326
  - User Guidelines
    326
  - Example
    326
- isdp advertise-v2
  326
  - Syntax
    326
  - Default Configuration
    327
  - Command Mode
    327
  - User Guidelines
    327
  - Example
    327
- isdp enable
  327
  - Syntax
    327
  - Default Configuration
    327
  - Command Mode
    327
  - User Guidelines
    327
  - Example
    328
- isdp holdtime
  328
  - Syntax
    328
  - Parameter Description
    328
  - Default Configuration
    328
  - Command Mode
    328
  - User Guidelines
    328
  - Example
    328
- isdp timer
  329
  - Syntax
    329
  - Parameter Description
    329
  - Default Configuration
    329
  - Command Mode
    329
  - User Guidelines
    329
  - Example
    329
- show isdp
  329
  - Syntax
    329
  - Default Configuration
    330
  - Command Mode
    330
  - User Guidelines
    330
  - Example
    330
- show isdp entry
  330
  - Syntax
    330
  - Parameter Description
    330
  - Default Configuration
    331
  - Command Mode
    331
  - User Guidelines
    331
  - Example
    331
- show isdp interface
  332
  - Syntax
    332
  - Default Configuration
    332
  - Command Mode
    332
  - User Guidelines
    332
  - Example
    332
- show isdp neighbors
  333
  - Syntax
    334
  - Default Configuration
    334
  - Command Mode
    334
  - User Guidelines
    334
  - Example
    334
- show isdp traffic
  335
  - Syntax
    335
  - Default Configuration
    335
  - Command Mode
    335
  - User Guidelines
    335
  - Example
    335
DHCP Layer 2 Relay Commands
337
- Commands in this Chapter
  337
- dhcp l2relay (Global Configuration)
  337
  - Syntax
    338
  - Default Configuration
    338
  - Command Mode
    338
  - User Guidelines
    338
  - Example
    338
- dhcp l2relay (Interface Configuration)
  338
  - Syntax
    338
  - Default Configuration
    338
  - Command Mode
    338
  - User Guidelines
    338
  - Example
    339
- dhcp l2relay circuit-id
  339
  - Syntax
    339
  - Parameter Description
    339
  - Default Configuration
    339
  - Command Mode
    339
  - User Guidelines
    339
  - Example
    339
- dhcp l2relay remote-id
  340
  - Syntax
    340
  - Parameter Description
    340
  - Default Configuration
    340
  - Command Mode
    340
  - User Guidelines
    340
  - Example
    340
- dhcp l2relay trust
  340
  - Syntax
    341
  - Default Configuration
    341
  - Configuration Mode
    341
  - User Guidelines
    341
  - Example
    341
- dhcp l2relay vlan
  341
  - Syntax
    341
  - Parameter Description
    341
  - Default Configuration
    341
  - Command Mode
    342
  - User Guidelines
    342
  - Example
    342
- show dhcp l2relay all
  342
  - Syntax
    342
  - Default Configuration
    342
  - Command Mode
    342
  - User Guidelines
    342
  - Example
    342
- show dhcp l2relay interface
  343
  - Syntax
    343
  - Parameter Description
    343
  - Default Configuration
    343
  - Command Mode
    343
  - User Guidelines
    343
  - Example
    344
- show dhcp l2relay stats interface
  344
  - Syntax
    344
  - Parameter Description
    344
  - Default Configuration
    344
  - Command Mode
    344
  - User Guidelines
    344
  - Example
    344
- show dhcp l2relay subscription interface
  345
  - Syntax
    345
  - Parameter Description
    345
  - Default Configuration
    345
  - Command Mode
    345
  - User Guidelines
    345
- show dhcp l2relay agent-option vlan
  345
  - Syntax
    346
  - Parameter Description
    346
  - Default Configuration
    346
  - Command Mode
    346
  - User Guidelines
    346
  - Example
    346
- show dhcp l2relay vlan
  347
  - Syntax
    347
  - Parameter Description
    347
  - Default Configuration
    347
  - Command Mode
    347
  - User Guidelines
    347
  - Example
    347
- show dhcp l2relay circuit-id vlan
  348
  - Syntax
    348
  - Parameter Description
    348
  - Default Configuration
    348
  - Command Mode
    348
  - User Guidelines
    348
  - Example
    348
- show dhcp l2relay remote-id vlan
  349
  - Syntax
    349
  - Parameter Description
    349
  - Default Configuration
    349
  - Command Mode
    349
  - User Guidelines
    349
  - Example
    349
- clear dhcp l2relay statistics interface
  350
  - Syntax
    350
  - Parameter Description
    350
  - Default Configuration
    350
  - Command Mode
    350
  - User Guidelines
    350
  - Example
    350
DHCP Management Interface Commands
351
- Commands in this Chapter
  351
- release dhcp
  352
  - Syntax
    352
  - Parameter Description
    352
  - Default Configuration
    352
  - Command Mode
    352
  - User Guidelines
    352
  - Example
    353
- renew dhcp
  353
  - Syntax
    353
  - Parameter Description
    353
  - Default Configuration
    353
  - Command Mode
    353
  - User Guidelines
    353
  - Examples
    354
- debug dhcp packet
  354
  - Syntax
    354
  - Parameter Description
    354
  - Default Configuration
    354
  - Command Mode
    354
  - User Guidelines
    354
  - Example
    354
- show dhcp lease
  355
  - Syntax
    355
  - Parameter Description
    355
  - Default Configuration
    355
  - Command Mode
    355
  - User Guidelines
    355
  - Examples
    356
DHCP Snooping Commands
359
- Commands in this Chapter
  360
- clear ip dhcp snooping binding
  360
  - Syntax
    360
  - Syntax Description
    360
  - Default Configuration
    360
  - Command Mode
    360
  - User Guidelines
    361
- clear ip dhcp snooping statistics
  361
  - Syntax
    361
  - Default Configuration
    361
  - Command Mode
    361
  - User Guidelines
    361
  - Example
    361
- ip dhcp snooping
  361
  - Syntax
    361
  - Default Configuration
    362
  - Command Mode
    362
  - User Guidelines
    362
  - Example
    362
- ip dhcp snooping binding
  362
  - Syntax
    362
  - Parameter Description
    363
  - Default Configuration
    363
  - Command Mode
    363
  - User Guidelines
    363
  - Example
    363
- ip dhcp snooping database
  363
  - Syntax
    363
  - Parameter Description
    364
  - Default Configuration
    364
  - Configuration Mode
    364
  - User Guidelines
    364
  - Example
    364
- ip dhcp snooping database write-delay
  364
  - Syntax
    364
  - Parameter Description
    365
  - Default Configuration
    365
  - Command Mode
    365
  - User Guidelines
    365
  - Example
    365
- ip dhcp snooping limit
  365
  - Syntax
    365
  - Default Configuration
    365
  - Command Mode
    366
  - User Guidelines
    366
  - Examples
    366
- ip dhcp snooping log-invalid
  366
  - Syntax
    366
  - Default Configuration
    366
  - Command Mode
    366
  - User Guidelines
    366
  - Example
    367
- ip dhcp snooping trust
  367
  - Syntax
    367
  - Default Configuration
    367
  - Command Mode
    367
  - User Guidelines
    367
  - Example
    367
- ip dhcp snooping verify mac-address
  367
  - Syntax
    368
  - Default Configuration
    368
  - Command Mode
    368
  - User Guidelines
    368
  - Example
    368
- show ip dhcp snooping
  368
  - Syntax
    368
  - Syntax Description
    368
  - Default Configuration
    368
  - Command Mode
    368
  - User Guidelines
    369
  - Example
    369
- show ip dhcp snooping binding
  369
  - Syntax
    369
  - Default Configuration
    370
  - Command Mode
    370
  - User Guidelines
    370
  - Example
    370
- show ip dhcp snooping database
  370
  - Syntax
    370
  - Syntax Description
    370
  - Default Configuration
    370
  - Command Mode
    371
  - User Guidelines
    371
  - Example
    371
- show ip dhcp snooping interfaces
  371
  - Syntax
    371
  - Default Configuration
    371
  - Command Mode
    371
  - User Guidelines
    371
  - Example
    371
- show ip dhcp snooping statistics
  372
  - Syntax
    372
  - Syntax Description
    372
  - Default Configuration
    372
  - Command Mode
    372
  - User Guidelines
    373
  - Example
    373
Dynamic ARP Inspection Commands
375
- Commands in this Chapter
  375
- arp access-list
  375
  - Syntax
    375
  - Default Configuration
    376
  - Command Mode
    376
  - User Guidelines
    376
  - Example
    376
- clear ip arp inspection statistics
  376
  - Syntax
    376
  - Parameter Description
    376
  - Default Configuration
    376
  - Command Mode
    376
  - User Guidelines
    376
  - Example
    377
- ip arp inspection filter
  377
  - Syntax
    377
  - Default Configuration
    377
  - Command Mode
    377
  - User Guidelines
    377
  - Example
    377
- ip arp inspection limit
  377
  - Syntax
    378
  - Default Configuration
    378
  - Command Mode
    378
  - User Guidelines
    378
  - Example
    378
- ip arp inspection trust
  378
  - Syntax
    379
  - Default Configuration
    379
  - Command Mode
    379
  - User Guidelines
    379
  - Example
    379
- ip arp inspection validate
  379
  - Syntax
    379
  - Default Configuration
    380
  - Command Mode
    380
  - User Guidelines
    380
  - Example
    380
- ip arp inspection vlan
  380
  - Syntax
    380
  - Default Configuration
    380
  - Command Mode
    380
  - User Guidelines
    381
  - Example
    381
- permit ip host mac host
  381
  - Syntax
    381
  - Default Configuration
    381
  - Command Mode
    381
  - User Guidelines
    381
  - Example
    381
- show arp access-list
  382
  - Syntax
    382
  - Default Configuration
    382
  - Command Mode
    382
  - User Guidelines
    382
  - Example
    382
- show ip arp inspection
  382
  - Syntax
    383
  - Parameter Description
    383
  - Default Configuration
    383
  - Command Mode
    383
  - User Guidelines
    383
  - Example
    384
- show ip arp inspection vlan
  385
  - Syntax
    385
  - Parameter Description
    385
  - Default Configuration
    385
  - Command Mode
    385
  - User Guidelines
    385
  - Example
    386
E-mail Alerting Commands
387
- Commands in this Chapter
  387
- logging email
  388
  - Syntax
    388
  - Parameter Description
    389
  - Default Configuration
    389
  - Command Mode
    389
  - User Guidelines
    389
- logging email urgent
  390
  - Syntax
    390
  - Parameter Description
    390
  - Default Configuration
    390
  - Command Mode
    391
  - User Guidelines
    391
- logging traps
  391
  - Syntax
    391
  - Parameter Description
    391
  - Default Configuration
    392
  - Command Mode
    392
  - User Guidelines
    392
- logging email message-type to-addr
  392
  - Syntax
    392
  - Parameter Description
    392
  - Default Configuration
    392
  - Command Mode
    393
  - User Guidelines
    393
- logging email from-addr
  393
  - Syntax
    393
  - Parameter Description
    393
  - Default Configuration
    393
  - Command Mode
    393
  - User Guidelines
    393
- logging email message-type subject
  393
  - Syntax
    394
  - Parameter Description
    394
  - Default Configuration
    394
  - Command Mode
    394
  - User Guidelines
    394
- logging email logtime
  394
  - Syntax
    394
  - Parameter Description
    394
  - Default Configuration
    394
  - Command Mode
    395
  - User Guidelines
    395
- logging email test message-type
  395
  - Syntax
    395
  - Parameter Description
    395
  - Default Configuration
    395
  - Command Mode
    395
  - User Guidelines
    395
- show logging email statistics
  396
  - Syntax
    396
  - Parameter Description
    396
  - Default Configuration
    396
  - Command Mode
    396
  - User Guidelines
    396
- clear logging email statistics
  396
  - Syntax
    396
  - Parameter Description
    396
  - Default Configuration
    397
  - Command Mode
    397
  - User Guidelines
    397
- security
  397
  - Syntax
    397
  - Parameter Description
    397
  - Default Configuration
    397
  - Command Mode
    397
  - User Guidelines
    397
- mail-server ip-address | hostname
  398
  - Syntax
    398
  - Parameter Description
    398
  - Default Configuration
    398
  - Command Mode
    398
  - User Guidelines
    398
- port (Mail Server Configuration Mode)
  399
  - Syntax
    399
  - Parameter Description
    399
  - Default Configuration
    399
  - Command Mode
    399
  - User Guidelines
    399
- username (Mail Server Configuration Mode)
  399
  - Syntax
    399
  - Parameter Description
    400
  - Default Configuration
    400
  - Command Mode
    400
  - User Guidelines
    400
- password (Mail Server Configuration Mode)
  400
  - Syntax
    400
  - Parameter Description
    400
  - Default Configuration
    400
  - Command Mode
    400
  - User Guidelines
    400
- show mail-server
  401
  - Syntax
    401
  - Parameter Description
    401
  - Default Configuration
    401
  - Command Mode
    401
  - User Guidelines
    401
  - Example
    401
Ethernet Configuration Commands
403
- Commands in this Chapter
  404
- clear counters
  404
  - Syntax
    404
  - Default Configuration
    405
  - Command Mode
    405
  - User Guidelines
    405
  - Example
    405
- description
  405
  - Syntax
    405
  - Default Configuration
    405
  - Command Mode
    405
  - User Guidelines
    406
  - Example
    406
- duplex
  406
  - Syntax
    406
  - Parameter Description
    406
  - Default Configuration
    406
  - Command Mode
    406
  - User Guidelines
    407
  - Example
    407
- flowcontrol
  407
  - Syntax
    407
  - Default Configuration
    407
  - Command Mode
    407
  - User Guidelines
    407
  - Example
    408
- interface
  408
  - Syntax
    408
  - Default Configuration
    408
  - Command Mode
    408
  - User Guidelines
    408
  - Example
    408
- interface range
  409
  - Syntax
    409
  - Default Configuration
    409
  - Command Mode
    409
  - User Guidelines
    409
  - Example
    410
- mtu
  410
  - Syntax
    410
  - Default Configuration
    411
  - Command Mode
    411
  - User Guidelines
    411
  - Example
    411
- show interfaces advertise
  411
  - Syntax
    411
  - Default Configuration
    412
  - Command Mode
    412
  - User Guidelines
    412
  - Examples
    412
- show interfaces configuration
  413
  - Syntax
    413
  - Default Configuration
    413
  - Command Mode
    414
  - User Guidelines
    414
  - Example
    414
- show interfaces counters
  415
  - Syntax
    415
  - Default Configuration
    415
  - Command Mode
    415
  - User Guidelines
    416
  - Example
    416
- show interfaces description
  418
  - Syntax
    418
  - Default Configuration
    419
  - Command Mode
    419
  - User Guidelines
    419
  - Example
    419
- show interfaces detail
  419
  - Syntax
    419
  - Default Configuration
    420
  - Command Mode
    420
  - User Guidelines
    420
  - Example
    420
- show interfaces status
  421
  - Syntax
    421
  - Default Configuration
    422
  - Command Mode
    422
  - User Guidelines
    422
  - Example
    422
- show statistics
  423
  - Syntax
    423
  - Parameter Description
    423
  - Default Configuration
    423
  - Command Mode
    423
  - User Guidelines
    423
  - Examples
    423
- show statistics switchport
  426
  - Syntax
    426
  - Parameter Description
    426
  - Default Configuration
    426
  - Command Mode
    426
  - User Guidelines
    426
  - Example
    426
- show storm-control
  428
  - Syntax
    428
  - Default Configuration
    428
  - Command Mode
    428
  - User Guidelines
    428
  - Examples
    428
- shutdown
  429
  - Syntax
    429
  - Default Configuration
    429
  - Command Mode
    429
  - User Guidelines
    429
  - Examples
    429
- speed
  429
  - Syntax
    430
  - Parameter Description
    430
  - Default Configuration
    430
  - Command Mode
    430
  - User Guidelines
    430
  - Example
    431
- storm-control broadcast
  431
  - Syntax
    431
  - Default Configuration
    431
  - Command Mode
    431
  - User Guidelines
    431
  - Example
    432
- storm-control multicast
  432
  - Syntax
    432
  - Default Configuration
    432
  - Command Mode
    432
  - User Guidelines
    432
  - Example
    432
- storm-control unicast
  433
  - Syntax
    433
  - Default Configuration
    433
  - Command Mode
    433
  - User Guidelines
    433
  - Example
    433
- switchport protected
  434
  - Syntax
    434
  - Default Configuration
    434
  - Command Mode
    434
  - User Guidelines
    434
  - Example
    434
- switchport protected name
  435
  - Syntax
    435
  - Default Configuration
    435
  - Command Mode
    435
  - User Guidelines
    435
  - Example
    435
- show switchport protected
  436
  - Syntax
    436
  - Default Configuration
    436
  - Command Mode
    436
  - User Guidelines
    436
  - Example
    436
Ethernet CFM Commands
437
- Commands in this Chapter
  437
- ethernet cfm domain
  438
  - Syntax
    438
  - Parameter Description
    438
  - Default Configuration
    438
  - Command Mode
    438
  - User Guidelines
    439
  - Example
    439
- service
  439
  - Syntax
    439
  - Parameter Description
    439
  - Default Configuration
    439
  - Command Mode
    440
  - User Guidelines
    440
  - Example
    440
- ethernet cfm cc level
  440
  - Syntax
    440
  - Parameter Description
    440
  - Default Configuration
    441
  - Command Mode
    441
  - User Guidelines
    441
  - Example
    441
- ethernet cfm mep level
  441
  - Syntax
    441
  - Parameter Description
    441
  - Default Configuration
    441
  - Command Mode
    442
  - User Guidelines
    442
  - Example
    442
- ethernet cfm mep enable
  442
  - Syntax
    442
  - Parameter Description
    442
  - Default Configuration
    442
  - Command Mode
    442
  - User Guidelines
    443
  - Example
    443
- ethernet cfm mep active
  443
  - Syntax
    443
  - Parameter Description
    443
  - Default Configuration
    443
  - Command Mode
    443
  - User Guidelines
    443
- ethernet cfm mep archive-hold-time
  444
  - Syntax
    444
  - Parameter Description
    444
  - Default Configuration
    444
  - Command Mode
    444
  - User Guidelines
    444
  - Example
    444
- ethernet cfm mip level
  444
  - Syntax
    445
  - Parameter Description
    445
  - Default Configuration
    445
  - Command Mode
    445
  - User Guidelines
    445
  - Example
    445
- ping ethernet cfm
  445
  - Syntax
    445
  - Parameter Description
    445
  - Default Configuration
    446
  - Command Mode
    446
  - User Guidelines
    446
  - Example
    446
- traceroute ethernet cfm
  446
  - Syntax
    447
  - Parameter Description
    447
  - Default Configuration
    447
  - Command Mode
    447
  - User Guidelines
    447
  - Example
    447
- show ethernet cfm errors
  448
  - Syntax
    448
  - Parameter Description
    448
  - Default Configuration
    448
  - Command Mode
    448
  - User Guidelines
    448
- show ethernet cfm domain
  448
  - Syntax
    449
  - Parameter Description
    449
  - Default Configuration
    449
  - Command Mode
    449
  - User Guidelines
    449
- show ethernet cfm maintenance-points local
  449
  - Syntax
    450
  - Parameter Description
    450
  - Default Configuration
    450
  - Command Mode
    450
  - User Guidelines
    450
- show ethernet cfm maintenance-points remote
  451
  - Syntax
    451
  - Parameter Description
    451
  - Default Configuration
    451
  - Command Mode
    451
  - User Guidelines
    451
- show ethernet cfm statistics
  452
  - Syntax
    452
  - Parameter Description
    452
  - Default Configuration
    452
  - Command Mode
    452
  - User Guidelines
    452
- debug cfm
  453
  - Syntax
    454
  - Parameter Description
    454
  - Default Configuration
    454
  - Command Mode
    454
  - User Guidelines
    454
GVRP Commands
457
- Commands in this Chapter
  457
- clear gvrp statistics
  457
  - Syntax
    458
  - Default Configuration
    458
  - Command Mode
    458
  - User Guidelines
    458
  - Example
    458
- garp timer
  458
  - Syntax
    458
  - Default Configuration
    459
  - Command Mode
    459
  - User Guidelines
    459
  - Example
    459
- gvrp enable (global)
  459
  - Syntax
    460
  - Default Configuration
    460
  - Command Mode
    460
  - User Guidelines
    460
  - Example
    460
- gvrp enable (interface)
  460
  - Syntax
    460
  - Default Configuration
    460
  - Command Mode
    460
  - User Guidelines
    461
  - Example
    461
- gvrp registration-forbid
  461
  - Syntax
    461
  - Default Configuration
    461
  - Command Mode
    461
  - User Guidelines
    461
  - Example
    462
- gvrp vlan-creation-forbid
  462
  - Syntax
    462
  - Default Configuration
    462
  - Command Mode
    462
  - User Guidelines
    462
  - Example
    462
- show gvrp configuration
  463
  - Syntax
    463
  - Default Configuration
    463
  - Command Mode
    463
  - User Guidelines
    463
  - Example
    463
- show gvrp error-statistics
  464
  - Syntax
    464
  - Default Configuration
    464
  - Command Mode
    464
  - User Guidelines
    464
  - Example
    464
- show gvrp statistics
  465
  - Syntax
    465
  - Default Configuration
    465
  - Command Mode
    465
  - User Guidelines
    465
  - Example
    465
IGMP Snooping Commands
467
- Commands in this Chapter
  468
- ip igmp snooping
  468
  - Syntax
    468
  - Parameter Description
    469
  - Default Configuration
    469
  - Command Mode
    469
  - User Guidelines
    469
  - Example
    469
- show ip igmp snooping
  470
  - Syntax
    470
  - Parameter Description
    470
  - Default Configuration
    470
  - Command Mode
    470
  - User Guidelines
    470
  - Example
    470
- show ip igmp snooping groups
  471
  - Syntax
    471
  - Default Configuration
    472
  - Command Mode
    472
  - User Guidelines
    472
  - Example
    472
- show ip igmp snooping mrouter
  472
  - Syntax
    473
  - Default Configuration
    473
  - Command Mode
    473
  - User Guidelines
    473
  - Example
    473
- ip igmp snooping vlan immediate-leave
  473
  - Syntax
    474
  - Default Configuration
    474
  - Command Mode
    474
  - User Guidelines
    474
  - Example
    474
- ip igmp snooping vlan groupmembership-interval
  474
  - Syntax
    474
  - Default Configuration
    475
  - Command Mode
    475
  - User Guidelines
    475
  - Example
    475
- ip igmp snooping vlan last-member-query- interval
  475
  - Syntax
    475
  - Default Configuration
    476
  - Command Mode
    476
  - User Guidelines
    476
  - Example
    476
- ip igmp snooping vlan mcrtrexpiretime
  476
  - Syntax
    476
  - Default Configuration
    476
  - Command Mode
    477
  - User Guidelines
    477
- ip igmp snooping report-suppression
  477
  - Syntax
    477
  - Default Configuration
    477
  - Command Mode
    477
  - User Guidelines
    477
- ip igmp snooping unregistered floodall
  478
  - Syntax
    478
  - Default Configuration
    478
  - Command Mode
    478
  - User Guidelines
    478
- ip igmp snooping vlan mrouter
  478
  - Syntax
    479
  - Default Configuration
    479
  - Command Mode
    479
  - User Guidelines
    479
IGMP Snooping Querier Commands
481
- Commands in this Chapter
  481
- ip igmp snooping querier
  481
  - Syntax
    482
  - Default Configuration
    482
  - Command Mode
    482
  - User Guidelines
    482
  - Example
    483
- ip igmp snooping querier election participate
  483
  - Syntax
    483
  - Default Configuration
    483
  - Command Mode
    483
  - User Guidelines
    483
  - Example
    483
- ip igmp snooping querier query-interval
  484
  - Syntax
    484
  - Default Configuration
    484
  - Command Mode
    484
  - User Guidelines
    484
  - Example
    484
- ip igmp snooping querier timer expiry
  484
  - Syntax
    485
  - Default Configuration
    485
  - Command Mode
    485
  - User Guidelines
    485
  - Example
    485
- ip igmp snooping querier version
  485
  - Syntax
    485
  - Default Configuration
    485
  - Command Mode
    486
  - User Guidelines
    486
  - Example
    486
- show ip igmp snooping querier
  486
  - Syntax
    486
  - Syntax Description
    486
  - Default Configuration
    488
  - Command Mode
    488
  - User Guidelines
    488
  - Example
    488
IP Addressing Commands
489
- Commands in this Chapter
  489
- clear host
  490
  - Syntax
    490
  - Default Configuration
    490
  - Command Mode
    490
  - User Guidelines
    490
  - Example
    490
- clear ip address-conflict-detect
  490
  - Syntax
    490
  - Parameter Description
    490
  - Default Configuration
    491
  - Command Mode
    491
  - User Guidelines
    491
  - Example
    491
- interface out-of-band
  491
  - Syntax Description
    491
  - Default Configuration
    491
  - Command Mode
    491
  - User Guidelines
    491
  - Example
    491
- ip address (Out-of-Band)
  492
  - Syntax
    492
  - Parameter Description
    492
  - Default Configuration
    492
  - Command Mode
    492
  - User Guidelines
    492
  - Example
    493
- ip address-conflict-detect run
  493
  - Syntax
    493
  - Parameter Description
    493
  - Default Configuration
    493
  - Command Mode
    493
  - User Guidelines
    493
  - Example
    493
- ip address dhcp (Interface Config)
  494
  - Syntax
    494
  - Parameter Description
    494
  - Default Configuration
    494
  - Command Mode
    494
  - User Guidelines
    494
  - Examples
    495
- ip default-gateway
  495
  - Syntax
    495
  - Parameter Description
    495
  - Default Configuration
    495
  - Command Mode
    496
  - User Guidelines
    496
  - Example
    496
- ip domain-lookup
  496
  - Syntax
    496
  - Default Configuration
    496
  - Command Mode
    496
  - User Guidelines
    497
  - Example
    497
- ip domain-name
  497
  - Syntax
    497
  - Default Configuration
    497
  - Command Mode
    497
  - User Guidelines
    497
  - Example
    497
- ip host
  498
  - Syntax
    498
  - Default Configuration
    498
  - Command Mode
    498
  - User Guidelines
    498
  - Example
    498
- ip name-server
  498
  - Syntax
    498
  - Default Configuration
    499
  - Command Mode
    499
  - User Guidelines
    499
  - Example
    499
- ipv6 address (Interface Config)
  499
  - Syntax
    499
  - Default Configuration
    500
  - Command Mode
    500
  - User Guidelines
    500
  - Example
    500
- ipv6 address (OOB Port)
  501
  - Syntax
    501
  - Parameter Description
    501
  - Default Configuration
    501
  - Command Mode
    501
  - User Guidelines
    502
- ipv6 address dhcp
  502
  - Syntax
    502
  - Parameter Description
    502
  - Default Configuration
    502
  - Command Mode
    502
  - User Guidelines
    502
  - Examples
    503
- ipv6 enable (Interface Config)
  503
  - Syntax
    503
  - Default Configuration
    503
  - Command Mode
    503
  - User Guidelines
    503
  - Example
    503
- ipv6 enable (OOB Config)
  504
  - Syntax
    504
  - Default Configuration
    504
  - Command Mode
    504
  - User Guidelines
    504
- ipv6 gateway (OOB Config)
  504
  - Syntax
    504
  - Parameter Description
    504
  - Default Configuration
    505
  - Command Mode
    505
  - User Guidelines
    505
- show hosts
  505
  - Default Configuration
    505
  - Command Mode
    505
  - User Guidelines
    505
  - Example
    505
- show ip address-conflict
  506
  - Syntax
    506
  - Parameter Description
    506
  - Default Configuration
    506
  - Command Mode
    506
  - User Guidelines
    506
  - Example
    507
- show ip helper-address
  507
  - Syntax
    507
  - Default Configuration
    508
  - Command Mode
    508
  - User Guidelines
    508
  - Example
    508
- show ipv6 dhcp interface out-of-band statistics
  508
  - Syntax
    508
  - Default Configuration
    508
  - Command Mode
    508
  - User Guidelines
    509
  - Example
    509
- show ipv6 interface out-of-band
  509
  - Syntax
    509
  - Parameter Description
    510
  - Default Configuration
    510
  - Command Mode
    510
  - User Guidelines
    510
  - Example
    510
IPv6 Access List Commands
511
- Commands in this Chapter
  511
- deny | permit (IPv6 ACL)
  512
  - Syntax
    512
  - Parameter Description
    512
  - Default Configuration
    514
  - Command Mode
    514
  - User Guidelines
    514
  - Example
    514
- ipv6 access-list
  514
  - Syntax
    514
  - Default Configuration
    515
  - Command Mode
    515
  - User Guidelines
    515
  - Example
    515
- ipv6 access-list rename
  515
  - Syntax
    515
  - Default Configuration
    515
  - Command Mode
    516
  - User Guidelines
    516
  - Example
    516
- ipv6 traffic-filter
  516
  - Syntax
    516
  - Default Configuration
    517
  - Command Modes
    517
  - User Guidelines
    517
  - Example
    517
- show ipv6 access-lists
  517
  - Syntax
    517
  - Parameter Description
    517
  - Default Configuration
    517
  - Command Mode
    518
  - User Guidelines
    518
  - Example
    518
IPv6 MLD Snooping Commands
521
- Commands in this Chapter
  521
- ipv6 mld snooping vlan groupmembership- interval
  522
  - Syntax
    522
  - Default Configuration
    522
  - Command Mode
    522
  - User Guidelines
    522
  - Example
    522
- ipv6 mld snooping vlan immediate-leave
  522
  - Syntax
    523
  - Default Configuration
    523
  - Command Mode
    523
  - User Guidelines
    523
  - Example
    523
- ipv6 mld snooping listener-message-suppression
  523
  - Syntax
    523
  - Default Configuration
    524
  - Command Mode
    524
  - User Guidelines
    524
  - Example
    524
- ipv6 mld snooping vlan last-listener-query- interval
  524
  - Syntax
    524
  - Default Configuration
    524
  - Command Mode
    524
  - User Guidelines
    525
  - Example
    525
- ipv6 mld snooping vlan mcrtexpiretime
  525
  - Syntax
    525
  - Default Configuration
    525
  - Command Mode
    525
  - User Guidelines
    525
  - Example
    525
- ipv6 mld snooping vlan mrouter
  526
  - Syntax
    526
  - Default Configuration
    526
  - Command Mode
    526
  - User Guidelines
    526
  - Example
    526
- ipv6 mld snooping (Global)
  526
  - Syntax
    526
  - Default Configuration
    527
  - Command Mode
    527
  - User Guidelines
    527
  - Example
    527
- show ipv6 mld snooping
  527
  - Syntax
    528
  - Default Configuration
    528
  - Command Mode
    528
  - User Guidelines
    528
  - Example
    528
- show ipv6 mld snooping groups
  529
  - Syntax
    529
  - Default configuration
    529
  - Command Mode
    529
  - User Guidelines
    529
  - Example
    529
- show ipv6 mld snooping mrouter
  530
  - Syntax
    531
  - Default configuration
    531
  - Command Mode
    531
  - User Guidelines
    531
  - Example
    531
IPv6 MLD Snooping Querier Commands
533
- Commands in this Chapter
  533
- ipv6 mld snooping querier
  534
  - Syntax
    534
  - Default Configuration
    534
  - Command Mode
    534
  - User Guidelines
    534
  - Example
    534
- ipv6 mld snooping querier (VLAN mode)
  534
  - Syntax
    534
  - Default Configuration
    534
  - Command Mode
    535
  - User Guidelines
    535
  - Example
    535
- ipv6 mld snooping querier address
  535
  - Syntax
    535
  - Default Configuration
    535
  - Command Mode
    535
  - User Guidelines
    535
  - Example
    535
- ipv6 mld snooping querier election participate
  536
  - Syntax
    536
  - Default Configuration
    536
  - Command Mode
    536
  - User Guidelines
    536
  - Example
    536
- ipv6 mld snooping querier query-interval
  537
  - Syntax
    537
  - Default Configuration
    537
  - Command Mode
    537
  - User Guidelines
    537
  - Example
    537
- ipv6 mld snooping querier timer expiry
  537
  - Syntax
    537
  - Default Configuration
    538
  - Command Mode
    538
  - User Guidelines
    538
  - Example
    538
- show ipv6 mld snooping querier
  538
  - Syntax
    538
  - Default Configuration
    538
  - Command Mode
    538
  - User Guidelines
    539
IP Source Guard Commands
541
- Commands in this Chapter
  541
- ip verify source
  541
  - Syntax
    542
  - Default Configuration
    542
  - Command Mode
    542
  - User Guidelines
    542
  - Example
    542
- ip verify source port-security
  542
  - Syntax
    542
  - Default Configuration
    542
  - Command Mode
    542
  - User Guidelines
    542
  - Example
    542
- ip verify binding
  543
  - Syntax
    543
  - Default Configuration
    543
  - Command Mode
    543
  - User Guidelines
    543
  - Example
    543
- show ip verify interface
  543
  - Syntax
    543
  - Default Configuration
    543
  - Command Mode
    543
  - User Guidelines
    544
  - Example
    544
- show ip verify source interface
  544
  - Syntax
    544
  - Default Configuration
    544
  - Command Mode
    544
  - User Guidelines
    544
  - Example
    544
- show ip source binding
  544
  - Syntax
    544
  - Default Configuration
    545
  - Command Mode
    545
  - User Guidelines
    545
  - Example
    545
iSCSI Optimization Commands
547
- Commands in this Chapter
  548
- iscsi aging time
  548
  - Syntax
    548
  - Default Configuration
    548
  - Command Mode
    548
  - User Guidelines
    548
  - Example
    549
- iscsi cos
  549
  - Syntax
    549
  - Parameter Description
    549
  - Default Configuration
    550
  - Command Mode
    550
  - User Guidelines
    550
  - Example
    550
- iscsi enable
  551
  - Syntax
    551
  - Default Configuration
    551
  - Command Mode
    551
  - User Guidelines
    551
  - Example
    552
- iscsi target port
  552
  - Syntax
    552
  - Parameter Description
    552
  - Default Configuration
    553
  - Command Mode
    553
  - User Guidelines
    553
  - Example
    554
- show iscsi
  554
  - Syntax
    554
  - Default Configuration
    554
  - Command Mode
    554
  - User Guidelines
    554
  - Example
    554
- show iscsi sessions
  555
  - Syntax
    555
  - Default Configuration
    555
  - Command Mode
    555
  - User Guidelines
    555
  - Example
    555
Link Dependency Commands
559
- Commands in this Chapter
  559
- action
  559
  - Syntax
    559
  - Parameter Description
    559
  - Default Configuration
    560
  - Command Mode
    560
  - User Guidelines
    560
  - Example
    560
- link-dependency group
  560
  - Syntax
    560
  - Default Configuration
    560
  - Command Mode
    560
  - User Guidelines
    560
  - Example
    561
- add gigabitethernet
  561
  - Syntax
    561
  - Default Configuration
    561
  - Command Mode
    561
  - User Guidelines
    561
  - Example
    561
- add tengigabitethernet
  561
  - Syntax
    561
  - Default Configuration
    562
  - Command Mode
    562
  - User Guidelines
    562
  - Example
    562
- add port-channel
  562
  - Syntax
    562
  - Default Configuration
    562
  - Command Mode
    563
  - User Guidelines
    563
  - Example
    563
- depends-on
  563
  - Syntax
    563
  - Default Configuration
    563
  - Command Mode
    563
  - User Guidelines
    563
  - Examples
    564
- show link-dependency
  564
  - Syntax
    564
  - Parameter Description
    564
  - Default Configuration
    564
  - Command Mode
    564
  - User Guidelines
    564
  - Example
    564
LLDP Commands
567
- Commands in this Chapter
  568
- clear lldp remote-data
  568
  - Syntax
    568
  - Default Configuration
    569
  - Command Mode
    569
  - User Guidelines
    569
  - Example
    569
- clear lldp statistics
  569
  - Syntax
    569
  - Default Configuration
    569
  - Command Mode
    569
  - User Guidelines
    569
  - Example
    569
- dcb enable
  570
  - Syntax Description
    570
  - Command Mode
    570
  - Default Value
    570
  - Usage Guidelines
    570
  - Example
    570
- lldp med
  570
  - Syntax Description
    570
  - Parameter Ranges
    570
  - Command Mode
    571
  - Default Value
    571
  - Usage Guidelines
    571
  - Example
    571
- lldp med confignotification
  571
  - Syntax Description
    571
  - Parameter Ranges
    571
  - Command Mode
    571
  - Default Value
    571
  - Usage Guidelines
    571
  - Example
    572
- lldp med faststartrepeatcount
  572
  - Syntax Description
    572
  - Command Mode
    572
  - Default Value
    572
  - Usage Guidelines
    572
  - Example
    572
- lldp med transmit-tlv
  572
  - Syntax Description
    573
  - Parameter Description
    573
  - Parameter Ranges
    573
  - Command Mode
    573
  - Default Value
    573
  - Example
    573
- lldp notification
  573
  - Syntax
    573
  - Default Configuration
    573
  - Command Mode
    574
  - User Guidelines
    574
  - Example
    574
- lldp notification-interval
  574
  - Syntax
    574
  - Default Configuration
    574
  - Command Mode
    574
  - User Guidelines
    574
  - Example
    575
- lldp receive
  575
  - Syntax
    575
  - Default Configuration
    575
  - Command Mode
    575
  - User Guidelines
    575
  - Example
    575
- lldp timers
  575
  - Syntax
    576
  - Default Configuration
    576
  - Command Mode
    576
  - User Guidelines
    576
  - Examples
    576
- lldp transmit
  577
  - Syntax
    577
  - Default Configuration
    577
  - Command Mode
    577
  - User Guidelines
    577
  - Example
    577
- lldp transmit-mgmt
  577
  - Syntax
    577
  - Default Configuration
    578
  - Command Mode
    578
  - User Guidelines
    578
  - Example
    578
- lldp transmit-tlv
  578
  - Syntax
    578
  - Default Configuration
    578
  - Command Mode
    578
  - User Guidelines
    579
  - Example
    579
- show lldp
  579
  - Syntax
    579
  - Default Configuration
    579
  - Command Mode
    579
  - User Guidelines
    579
  - Example
    579
- show lldp interface
  580
  - Syntax
    580
  - Default Configuration
    580
  - Command Mode
    580
  - User Guidelines
    580
  - Examples
    580
- show lldp local-device
  581
  - Syntax
    581
  - Default Configuration
    581
  - Command Mode
    581
  - User Guidelines
    581
  - Examples
    581
- show lldp med
  582
  - Syntax Description
    582
  - Parameter Ranges
    582
  - Command Mode
    583
  - Default Value
    583
  - Usage Guidelines
    583
  - Example
    583
- show lldp med interface
  583
  - Syntax Description
    583
  - Parameter Ranges
    583
  - Command Mode
    583
  - Default Value
    584
  - Example
    584
- show lldp med local-device detail
  584
  - Syntax Description
    584
  - Parameter Ranges
    584
  - Command Mode
    585
  - Default Value
    585
  - Example
    585
- show lldp med remote-device
  587
  - Syntax Description
    587
  - Parameter Ranges
    587
  - Command Mode
    587
  - Default Value
    587
  - Example
    587
- show lldp remote-device
  590
  - Syntax
    590
  - Default Configuration
    590
  - Command Mode
    590
  - User Guidelines
    590
  - Examples
    590
- show lldp statistics
  591
  - Syntax
    591
  - Default Configuration
    591
  - Command Mode
    591
  - User Guidelines
    592
  - Examples
    592
Multicast VLAN Registration Commands
595
- Commands in this Chapter
  596
- mvr
  596
  - Syntax
    596
  - Parameter Description
    596
  - Default Configuration
    596
  - Command Mode
    596
  - User Guidelines
    596
- mvr group
  597
  - Syntax
    597
  - Parameter Description
    597
  - Default Configuration
    597
  - Command Mode
    597
  - User Guidelines
    597
  - Example
    597
- mvr mode
  598
  - Syntax
    598
  - Parameter Description
    598
  - Default Configuration
    598
  - Command Mode
    598
  - User Guidelines
    598
- mvr querytime
  598
  - Syntax
    599
  - Parameter Description
    599
  - Default Configuration
    599
  - Command Mode
    599
  - User Guidelines
    599
  - Example
    599
- mvr vlan
  600
  - Syntax
    600
  - Parameter Description
    600
  - Default Configuration
    600
  - Command Mode
    600
  - User Guidelines
    600
- mvr immediate
  600
  - Syntax
    601
  - Parameter Description
    601
  - Default Configuration
    601
  - Command Mode
    601
  - User Guidelines
    601
  - Example
    601
- mvr type
  601
  - Syntax
    602
  - Parameter Description
    602
  - Default Configuration
    602
  - Command Mode
    602
  - User Guidelines
    602
  - Example
    602
- mvr vlan group
  603
  - Syntax
    603
  - Parameter Description
    603
  - Default Configuration
    603
  - Command Mode
    603
  - User Guidelines
    604
  - Example
    604
- show mvr
  604
  - Syntax
    604
  - Parameter Description
    604
  - Default Configuration
    605
  - Command Mode
    605
  - User Guidelines
    605
  - Example
    605
- show mvr members
  605
  - Syntax
    606
  - Parameter Description
    606
  - Default Configuration
    606
  - Command Mode
    606
  - User Guidelines
    606
  - Examples
    606
- show mvr interface
  607
  - Syntax
    607
  - Parameter Description
    607
  - Default Configuration
    608
  - Command Mode
    608
  - User Guidelines
    608
  - Examples
    608
- show mvr traffic
  608
  - Syntax
    608
  - Parameter Description
    609
  - Default Configuration
    609
  - Command Mode
    609
  - User Guidelines
    609
  - Examples
    609
Port Channel Commands
611
- Static LAGS
  611
- VLANs and LAGs
  612
- LAG Thresholds
  612
- Port Channels
  613
- LAG Hashing
  613
- Enhanced LAG Hashing
  614
- Manual Aggregation of LAGs
  614
- Manual Aggregation of LAGs
  615
- Flexible Assignment of Ports to LAGs
  615
- Commands in this Chapter
  615
- channel-group
  615
  - Syntax
    615
  - Default Configuration
    616
  - Command Mode
    616
  - User Guidelines
    616
  - Example
    616
- interface port-channel
  616
  - Syntax
    616
  - Default Configuration
    616
  - Command Mode
    617
  - User Guidelines
    617
  - Example
    617
- interface range port-channel
  617
  - Syntax
    617
  - Default Configuration
    617
  - Command Mode
    617
  - User Guidelines
    617
  - Example
    618
- hashing-mode
  618
  - Syntax
    618
  - Default Configuration
    618
  - Command Mode
    618
  - User Guidelines
    618
  - Example
    619
- lacp port-priority
  619
  - Syntax
    619
  - Default Configuration
    619
  - Command Mode
    619
  - User Guidelines
    619
  - Example
    619
- lacp system-priority
  620
  - Syntax
    620
  - Default Configuration
    620
  - Command Mode
    620
  - User Guidelines
    620
  - Example
    620
- lacp timeout
  620
  - Syntax
    620
  - Default Configuration
    621
  - Command Mode
    621
  - User Guidelines
    621
  - Example
    621
- port-channel local-preference
  621
  - Syntax
    621
  - Default Configuration
    621
  - Command Mode
    621
  - User Guidelines
    622
- port-channel min-links
  622
  - Syntax
    622
  - Parameter Description
    622
  - Default Configuration
    622
  - Command Mode
    623
  - User Guidelines
    623
- show interfaces port-channel
  623
  - Syntax Description
    623
  - Parameter Description
    623
  - Default Configuration
    623
  - Command Mode
    623
  - User Guidelines
    623
  - Example #1
    624
  - Example #2
    624
- show lacp
  624
  - Syntax
    624
  - Default Configuration
    624
  - Command Mode
    625
  - User Guidelines
    625
  - Example
    625
- show statistics port-channel
  626
  - Syntax
    626
  - Default Configuration
    626
  - Command Mode
    626
  - User Guidelines
    627
  - Example
    627
Port Monitor Commands
631
- Commands in this Chapter
  631
- monitor session
  632
  - Syntax
    632
  - Default Configuration
    632
  - Command Mode
    632
  - User Guidelines
    633
  - Example
    633
- show monitor session
  633
  - Syntax
    633
  - Default Configuration
    633
  - Command Mode
    633
  - User Guidelines
    633
  - Example
    633
QoS Commands
635
- Access Control Lists
  635
- Layer 2 ACLs
  636
- Layer 3/4 IPv4 ACLs
  636
- Class of Service (CoS)
  636
- Queue Mapping
  637
- Commands in this Chapter
  638
- assign-queue
  639
  - Syntax
    639
  - Default Configuration
    639
  - Command Mode
    639
  - User Guidelines
    639
  - Example
    639
- class
  639
  - Syntax
    639
  - Default Configuration
    640
  - Command Mode
    640
  - User Guidelines
    640
  - Example
    640
- class-map
  640
  - Syntax
    640
  - Default Configuration
    640
  - Command Mode
    640
  - User Guidelines
    641
  - Example
    641
- class-map rename
  641
  - Syntax
    641
  - Default Configuration
    641
  - Command Mode
    641
  - User Guidelines
    641
  - Example
    641
- classofservice dot1p-mapping
  642
  - Syntax
    642
  - Default Configuration
    642
  - Command Mode
    642
  - User Guidelines
    643
  - Example
    643
- classofservice ip-dscp-mapping
  643
  - Syntax
    643
  - Parameter Description
    643
  - Default Configuration
    643
  - Command Mode
    646
  - User Guidelines
    646
  - Example
    646
- classofservice trust
  646
  - Syntax
    646
  - Default Configuration
    647
  - Command Mode
    647
  - User Guidelines
    647
  - Examples
    647
- conform-color
  647
  - Syntax
    648
  - Default Configuration
    648
  - Command Mode
    648
  - User Guidelines
    648
  - Example
    648
- cos-queue min-bandwidth
  649
  - Syntax
    649
  - Default Configuration
    649
  - Command Mode
    649
  - User Guidelines
    650
  - Example
    650
- cos-queue random-detect
  650
  - Syntax
    650
  - Parameter Description
    651
  - Default Configuration
    651
  - Command Mode
    651
  - User Guidelines
    651
  - Example
    652
- cos-queue strict
  652
  - Syntax
    652
  - Default Configuration
    652
  - Command Mode
    652
  - User Guidelines
    653
  - Example
    653
- diffserv
  653
  - Syntax
    653
  - Default Configuration
    653
  - Command Mode
    653
  - User Guidelines
    653
  - Example
    654
- drop
  654
  - Syntax
    654
  - Default Configuration
    654
  - Command Mode
    654
  - User Guidelines
    654
  - Example
    654
- mark cos
  654
  - Syntax
    655
  - Default Configuration
    655
  - Command Mode
    655
  - User Guidelines
    655
  - Example
    655
- mark ip-dscp
  655
  - Syntax
    655
  - Default Configuration
    655
  - Command Mode
    656
  - User Guidelines
    656
  - Example
    656
- mark ip-precedence
  656
  - Syntax
    656
  - Default Configuration
    656
  - Command Mode
    656
  - User Guidelines.
    656
  - Example
    656
- match class-map
  657
  - Syntax
    657
  - Default Configuration
    657
  - Command Mode
    657
  - User Guidelines
    657
  - Example
    658
- match cos
  658
  - Syntax
    658
  - Default Configuration
    658
  - Command Mode
    658
  - User Guidelines
    658
  - Example
    659
- match destination-address mac
  659
  - Syntax
    659
  - Default Configuration
    659
  - Command Mode
    659
  - User Guidelines
    659
  - Example
    659
- match dstip
  660
  - Syntax
    660
  - Default Configuration
    660
  - Command Mode
    660
  - User Guidelines
    660
  - Example
    660
- match dstip6
  660
  - Syntax
    660
  - Default Configuration
    661
  - Command Mode
    661
  - User Guidelines
    661
  - Example
    661
- match dstl4port
  661
  - Syntax
    661
  - Default Configuration
    661
  - Command Mode
    661
  - User Guidelines
    662
  - Example
    662
- match ethertype
  662
  - Syntax
    662
  - Default Configuration
    662
  - Command Mode
    662
  - User Guidelines
    662
  - Example
    662
- match ip6flowlbl
  663
  - Syntax
    663
  - Default Configuration
    663
  - Command Mode
    663
  - User Guidelines
    663
  - Example
    663
- match ip dscp
  663
  - Syntax
    663
  - Default Configuration
    664
  - Command Mode
    664
  - User Guidelines
    664
  - Example
    664
- match ip precedence
  664
  - Syntax
    664
  - Default Configuration
    665
  - Command Mode
    665
  - User Guidelines
    665
  - Example
    665
- match ip tos
  665
  - Syntax
    665
  - Default Configuration
    665
  - Command Mode
    666
  - User Guidelines
    666
  - Example
    666
- match protocol
  666
  - Syntax
    666
  - Default Configuration
    666
  - Command Mode
    666
  - User Guidelines
    667
  - Example
    667
- match source-address mac
  667
  - Syntax
    667
  - Default Configuration
    667
  - Command Mode
    667
  - User Guidelines
    667
  - Example
    667
- match srcip
  668
  - Syntax
    668
  - Default Configuration
    668
  - Command Mode
    668
  - User Guidelines
    668
  - Example
    668
- match srcip6
  668
  - Syntax
    669
  - Default Configuration
    669
  - Command Mode
    669
  - User Guidelines
    669
  - Example
    669
- match srcl4port
  669
  - Syntax
    669
  - Default Configuration
    669
  - Command Mode
    670
  - User Guidelines
    670
  - Example
    670
- match vlan
  670
  - Syntax
    670
  - Default Configuration
    670
  - Command Mode
    670
  - User Guidelines
    670
  - Example
    671
- mirror
  671
  - Syntax
    671
  - Default Configuration
    671
  - Command Mode
    671
  - User Guidelines
    671
  - Example
    671
- police-simple
  671
  - Syntax
    672
  - Default Configuration
    672
  - Command Mode
    672
  - User Guidelines
    672
  - Example
    672
- police-two-rate
  673
  - Syntax
    673
  - Default Configuration
    674
  - Command Mode
    674
  - User Guidelines
    674
  - Example
    674
- policy-map
  674
  - Syntax
    674
  - Parameter Description
    674
  - Default Configuration
    675
  - Command Mode
    675
  - User Guidelines
    675
  - Example
    675
- random-detect queue-parms
  675
  - Syntax
    676
  - Parameter Description
    676
  - Default Configuration
    676
  - Command Mode
    677
  - User Guidelines
    677
  - Example
    677
- random-detect exponential-weighting-constant
  678
  - Syntax
    678
  - Default Configuration
    678
  - Command Mode
    678
  - User Guidelines
    678
- redirect
  678
  - Syntax
    679
  - Default Configuration
    679
  - Command Mode
    679
  - User Guidelines
    679
  - Example
    679
- service-policy
  679
  - Syntax
    679
  - Parameter Description
    679
  - Default Configuration
    680
  - Command Mode
    680
  - User Guidelines
    680
  - Example
    680
- show class-map
  680
  - Syntax
    681
  - Default Configuration
    681
  - Command Mode
    681
  - User Guidelines
    681
  - Example
    681
- show classofservice dot1p-mapping
  682
  - Syntax
    682
  - Default Configuration
    682
  - Command Mode
    682
  - User Guidelines
    682
  - Example
    682
- show classofservice ip-dscp-mapping
  683
  - Syntax
    683
  - Default Configuration
    683
  - Command Mode
    683
  - User Guidelines
    684
  - Example
    684
- show classofservice trust
  686
  - Syntax
    687
  - Default Configuration
    687
  - Command Mode
    687
  - User Guidelines
    687
  - Example
    687
- show diffserv
  687
  - Syntax
    687
  - Default Configuration
    687
  - Command Mode
    688
  - User Guidelines
    688
  - Example
    688
- show diffserv service interface
  688
  - Syntax
    688
  - Parameter Description
    688
  - Default Configuration
    689
  - Command Mode
    689
  - User Guidelines
    689
  - Example
    689
- show diffserv service interface port-channel
  689
  - Syntax Description
    689
  - Parameter Description
    689
  - Default Configuration
    689
  - Command Mode
    690
  - User Guidelines
    690
  - Example
    690
- show diffserv service brief
  690
  - Syntax
    690
  - Default Configuration
    690
  - Command Mode
    690
  - User Guidelines
    690
  - Example
    691
- show interfaces cos-queue
  691
  - Syntax
    691
  - Default Configuration
    691
  - Command Mode
    691
  - User Guidelines
    691
  - Examples
    691
- show interfaces random-detect
  693
  - Syntax
    693
  - Parameter Description
    693
  - Default Configuration
    693
  - Command Mode
    694
  - User Guidelines
    694
- show policy-map
  694
  - Syntax
    694
  - Default Configuration
    694
  - Command Mode
    694
  - User Guidelines
    694
  - Example
    694
- show policy-map interface
  695
  - Syntax
    695
  - Parameter Description
    695
  - Default Configuration
    695
  - Command Mode
    695
  - User Guidelines
    695
  - Example
    695
- show service-policy
  696
  - Syntax
    696
  - Default Configuration
    696
  - Command Mode
    696
  - User Guidelines
    696
  - Example
    696
- traffic-shape
  697
  - Syntax
    697
  - Default Configuration
    697
  - Command Mode
    697
  - User Guidelines
    697
  - Example
    698
RADIUS Commands
699
- Commands in this Chapter
  702
- aaa accounting dot1x default start-stop
  703
  - Syntax
    703
  - Parameter Description
    703
  - Default Configuration
    704
  - Command Mode
    704
  - User Guidelines
    704
- accounting
  705
  - Syntax
    705
  - Parameter Description
    705
  - Default Configuration
    705
  - Command Mode
    705
  - User Guidelines
    706
  - Examples
    706
- acct-port
  706
  - Syntax
    706
  - Default Configuration
    706
  - Command Mode
    706
  - User Guidelines
    706
  - Example
    706
- auth-port
  707
  - Syntax
    707
  - Default Configuration
    707
  - Command Mode
    707
  - User Guidelines
    707
  - Example
    707
- deadtime
  707
  - Syntax
    708
  - Default Configuration
    708
  - Command Mode
    708
  - User Guidelines
    708
  - Example
    708
- debug aaa accounting
  708
  - Syntax
    708
  - Default Configuration
    709
  - Command Mode
    709
  - User Guidelines
    709
- key
  709
  - Syntax
    709
  - Default Configuration
    709
  - Command Mode
    709
  - User Guidelines
    709
  - Example
    709
- msgauth
  710
  - Syntax
    710
  - Default Configuration
    710
  - Command Mode
    710
  - User Guidelines
    710
  - Example
    710
- name (RADIUS server)
  710
  - Syntax
    710
  - Parameter Description
    711
  - Default Configuration
    711
  - Command Mode
    711
  - User Guidelines
    711
  - Example
    711
- primary
  712
  - Syntax
    712
  - Default Configuration
    712
  - Command Mode
    712
  - User Guidelines
    712
  - Example
    712
- priority
  712
  - Syntax
    712
  - Default Configuration
    713
  - Command Mode
    713
  - User Guidelines
    713
  - Example
    713
- radius-server attribute 4
  713
  - Syntax
    713
  - Default Configuration
    713
  - Command Mode
    713
  - User Guidelines
    714
  - Example
    714
- radius-server deadtime
  714
  - Syntax
    714
  - Default Configuration
    714
  - Command Mode
    714
  - User Guidelines
    715
  - Example
    715
- radius-server host
  715
  - Syntax
    715
  - Parameter Description
    715
  - Default Configuration
    715
  - Command Mode
    715
  - User Guidelines
    716
  - Example
    716
- radius-server key
  716
  - Syntax
    716
  - Default Configuration
    716
  - Command Mode
    716
  - User Guidelines
    716
  - Example
    717
- radius-server retransmit
  717
  - Syntax
    717
  - Default Configuration
    717
  - Command Mode
    717
  - User Guidelines
    717
  - Example
    717
- radius-server source-ip
  718
  - Syntax
    718
  - Default Configuration
    718
  - Command Mode
    718
  - User Guidelines
    718
  - Example
    718
- radius-server timeout
  718
  - Syntax
    718
  - Default Configuration
    719
  - Command Mode
    719
  - User Guidelines
    719
  - Example
    719
- retransmit
  719
  - Syntax
    719
  - Default Configuration
    719
  - Command Mode
    719
  - User Guidelines
    719
  - Example
    720
- show aaa servers
  720
  - Syntax
    720
  - Parameter Description
    720
  - Default Configuration
    720
  - Command Mode
    720
  - User Guidelines
    720
  - Example
    721
- show accounting methods
  722
  - Syntax
    722
  - Default Configuration
    722
  - Command Mode
    722
  - User Guidelines
    722
  - Examples
    723
- show radius statistics
  723
  - Syntax
    723
  - Parameter Description
    723
  - Default Configuration
    724
  - Command Mode
    724
  - User Guidelines
    724
  - Example
    726
- source-ip
  727
  - Syntax
    727
  - Default Configuration
    727
  - Command Mode
    727
  - User Guidelines
    727
  - Example
    727
- timeout
  728
  - Syntax
    728
  - Default Configuration
    728
  - Command Mode
    728
  - User Guidelines
    728
  - Example
    728
- usage
  728
  - Syntax
    728
  - Default Configuration
    729
  - Command Mode
    729
  - User Guidelines
    729
  - Example
    729
Spanning Tree Commands
731
- Commands in this Chapter
  732
- clear spanning-tree detected-protocols
  733
  - Syntax
    733
  - Default Configuration
    733
  - Command Mode
    733
  - User Guidelines
    733
  - Example
    733
- exit (mst)
  734
  - Syntax
    734
  - Default Configuration
    734
  - Command Mode
    734
  - User Guidelines
    734
  - Example
    734
- instance (mst)
  734
  - Syntax
    734
  - Default Configuration
    735
  - Command Mode
    735
  - User Guidelines
    735
  - Example
    735
- name (mst)
  736
  - Syntax
    736
  - Default Configuration
    736
  - Command Mode
    736
  - User Guidelines
    736
  - Example
    736
- revision (mst)
  737
  - Syntax
    737
  - Default Configuration
    737
  - Command Mode
    737
  - User Guidelines
    737
  - Example
    737
- show spanning-tree
  737
  - Syntax
    738
  - Parameter Description
    738
  - Default Configuration
    738
  - Command Mode
    738
  - User Guidelines
    738
  - Examples
    738
- show spanning-tree summary
  741
  - Syntax
    741
  - Default Configuration
    741
  - Command Mode
    741
  - User Guidelines
    741
  - Example
    742
- spanning-tree
  743
  - Syntax
    743
  - Default Configuration
    743
  - Command Mode
    743
  - User Guidelines
    743
  - Example
    743
- spanning-tree auto-portfast
  743
  - Syntax
    743
  - Default Configuration
    744
  - Command Mode
    744
  - Usage Guidelines
    744
  - Example
    744
- spanning-tree bpdu flooding
  744
  - Syntax
    744
  - Default Configuration
    744
  - Command Mode
    744
  - Usage Guidelines
    744
  - Example
    745
- spanning-tree bpdu-protection
  745
  - Syntax
    745
  - Default Configuration
    745
  - Command Mode
    745
  - User Guidelines
    745
  - Example
    745
- spanning-tree cost
  746
  - Syntax
    746
  - Default Configuration
    746
  - Command Mode
    746
  - User Guidelines
    746
  - Example
    746
- spanning-tree disable
  747
  - Syntax
    747
  - Default Configuration
    747
  - Command Mode
    747
  - User Guidelines
    747
  - Example
    747
- spanning-tree forward-time
  747
  - Syntax
    748
  - Default Configuration
    748
  - Command Mode
    748
  - User Guidelines
    748
  - Example
    748
- spanning-tree guard
  748
  - Syntax
    748
  - Default Configuration
    749
  - Command Mode
    749
  - User Guidelines
    749
  - Example
    749
- spanning-tree loopguard
  749
  - Syntax
    749
  - Default Configuration
    749
  - Command Mode
    749
  - Usage Guidelines
    749
  - Example
    750
- spanning-tree max-age
  750
  - Syntax
    750
  - Default Configuration
    750
  - Command Mode
    750
  - User Guidelines
    750
  - Example
    750
- spanning-tree max-hops
  751
  - Syntax
    751
  - Default Configuration
    751
  - Command Mode
    751
  - User Guidelines
    751
  - Example
    751
- spanning-tree mode
  751
  - Syntax
    751
  - Default Configuration
    752
  - Command Mode
    752
  - User Guidelines
    752
  - Example
    752
- spanning-tree mst configuration
  752
  - Syntax
    752
  - Default Configuration
    752
  - Command Mode
    752
  - User Guidelines
    753
  - Example
    753
- spanning-tree mst cost
  753
  - Syntax
    753
  - Default Configuration
    753
  - Command Mode
    754
  - User Guidelines
    754
  - Example
    754
- spanning-tree mst port-priority
  754
  - Syntax
    754
  - Parameter Description
    754
  - Default Configuration
    754
  - Command Mode
    755
  - User Guidelines
    755
  - Example
    755
- spanning-tree mst priority
  755
  - Syntax
    755
  - Parameter Description
    755
  - Default Configuration
    755
  - Command Mode
    756
  - User Guidelines
    756
  - Example
    756
- spanning-tree portfast
  756
  - Syntax
    756
  - Default Configuration
    756
  - Command Mode
    756
  - User Guidelines
    757
  - Example
    757
- spanning-tree portfast bpdufilter default
  757
  - Syntax
    757
  - Default Configuration
    757
  - Command Mode
    757
  - Usage Guidelines
    757
  - Example
    758
- spanning-tree portfast default
  758
  - Syntax
    758
  - Default Configuration
    758
  - Command Mode
    758
  - Usage Guidelines
    758
  - Example
    758
- spanning-tree port-priority
  759
  - Syntax
    759
  - Default Configuration
    759
  - Command Mode
    759
  - User Guidelines
    759
  - Example
    759
- spanning-tree priority
  759
  - Syntax
    760
  - Default Configuration
    760
  - Command Mode
    760
  - User Guidelines
    760
  - Example
    760
- spanning-tree tcnguard
  760
  - Syntax
    760
  - Default Configuration
    760
  - Command Mode
    760
  - User Guidelines
    761
  - Example
    761
- spanning-tree transmit hold-count
  761
  - Syntax
    761
  - Default Configuration
    761
  - Command Mode
    761
  - User Guidelines
    761
  - Example
    761
TACACS+ Commands
763
- Commands in this Chapter
  763
- key
  764
  - Syntax
    764
  - Default Configuration
    764
  - Command Mode
    764
  - User Guidelines
    764
  - Example
    764
- port
  764
  - Syntax
    764
  - Default Configuration
    765
  - Command Mode
    765
  - User Guidelines
    765
  - Example
    765
- priority
  765
  - Syntax
    765
  - Default Configuration
    765
  - Command Mode
    765
  - User Guidelines
    765
  - Example
    765
- show tacacs
  766
  - Syntax
    766
  - Default Configuration
    766
  - Command Mode
    766
  - User Guidelines
    766
  - Examples
    766
- tacacs-server host
  767
  - Syntax
    767
  - Default Configuration
    767
  - Command Mode
    767
  - User Guidelines
    767
  - Example
    767
- tacacs-server key
  768
  - Syntax
    768
  - Default Configuration
    768
  - Command Mode
    768
  - User Guidelines
    768
  - Example
    768
- tacacs-server timeout
  769
  - Syntax
    769
  - Default Configuration
    769
  - Command Mode
    769
  - User Guidelines
    769
  - Example
    769
- timeout
  769
  - Syntax
    769
  - Default Configuration
    770
  - Command Mode
    770
  - User Guidelines
    770
  - Example
    770
UDLD Commands
771
- Detecting Unidirectional Links on a Device Port
  771
- Processing UDLD Traffic from Neighbors
  772
- UDLD in Normal-mode
  772
- UDLD in Aggressive-mode
  772
- Commands in this Chapter
  773
- udld enable (Global Config)
  773
  - Syntax
    773
  - Default Configuration
    773
  - Command Mode
    774
  - User Guidelines
    774
- udld reset
  774
  - Syntax
    774
  - Default Configuration
    774
  - Command Mode
    774
  - User Guidelines
    774
  - The following commands will reset an interface disabled by UDLD:
    774
- udld message time
  775
  - Syntax
    775
  - Parameter Description
    775
  - Default Configuration
    775
  - Command Mode
    775
  - User Guidelines
    775
- udld timeout interval
  775
  - Syntax
    776
  - Parameter Description
    776
  - Default Configuration
    776
  - Command Mode
    776
  - User Guidelines
    776
- udld enable (Interface Config)
  776
  - Syntax
    776
  - Default Configuration
    776
  - Command Mode
    777
  - User Guidelines
    777
- udld port
  777
  - Syntax
    777
  - Parameter Description
    777
  - Default Configuration
    777
  - Command Mode
    777
  - User Guidelines
    777
- show udld
  778
  - Syntax
    778
  - Field Description
    778
  - Default Configuration
    779
  - Command Mode
    779
  - User Guidelines
    779
- debug udld
  779
  - Syntax
    779
  - Parameter Description
    780
  - Default Configuration
    780
  - Command Mode
    780
  - User Guidelines
    780
VLAN Commands
781
- Double VLAN Mode
  781
- Independent VLAN Learning
  782
- Protocol Based VLANs
  782
- IP Subnet Based VLANs
  783
- MAC-Based VLANs
  783
- Private VLAN Commands
  783
  - Isolated VLAN
    785
  - Community VLAN
    785
  - Private VLANs Operation in the Switch Environment
    785
- Commands in this Chapter
  786
- dvlan-tunnel ethertype
  787
  - Syntax
    787
  - Parameter Description
    787
  - Default Configuration
    788
  - Command Mode
    788
  - User Guidelines
    788
  - Example
    788
- interface vlan
  788
  - Syntax
    788
  - Parameter Description
    789
  - Default Configuration
    789
  - Command Mode
    789
  - User Guidelines
    789
  - Examples
    789
- interface range vlan
  789
  - Syntax
    789
  - Default Configuration
    789
  - Command Mode
    790
  - User Guidelines
    790
  - Example
    790
- mode dvlan-tunnel
  790
  - Syntax
    790
  - Default Configuration
    790
  - Command Mode
    790
  - User Guidelines
    791
  - Example
    791
- name (VLAN Configuration)
  791
  - Syntax
    791
  - Parameter Description
    792
  - Default Configuration
    792
  - Command Mode
    792
  - User Guidelines
    792
  - Example
    792
- protocol group
  792
  - Syntax
    793
  - Default Configuration
    793
  - Command Mode
    793
  - User Guidelines
    793
  - Example
    793
- protocol vlan group
  793
  - Syntax
    794
  - Default Configuration
    794
  - Command Mode
    794
  - User Guidelines
    794
  - Example
    794
- protocol vlan group all
  794
  - Syntax
    795
  - Default Configuration
    795
  - Command Mode
    795
  - User Guidelines
    795
  - Example
    795
- show dvlan-tunnel
  795
  - Syntax
    795
  - Default Configuration
    796
  - Command Mode
    796
  - User Guidelines
    796
  - Example
    796
- show dvlan-tunnel interface
  796
  - Syntax
    796
  - Default Configuration
    796
  - Command Mode
    796
  - User Guidelines
    796
  - Example
    797
- show interfaces switchport
  797
  - Syntax
    797
  - Parameter Description
    797
  - Default Configuration
    798
  - Command Mode
    798
  - User Guidelines
    798
  - Examples
    798
- show port protocol
  801
  - Syntax
    801
  - Default Configuration
    802
  - Command Mode
    802
  - User Guidelines
    802
  - Example
    802
- show vlan
  802
  - Syntax
    802
  - Parameter Description
    802
  - Default Configuration
    803
  - Command Mode
    803
  - User Guidelines
    803
  - Example
    803
- show vlan association mac
  803
  - Syntax
    804
  - Default Configuration
    804
  - Command Mode
    804
  - User Guidelines
    804
  - Example
    804
- show vlan association subnet
  804
  - Syntax
    804
  - Default Configuration
    805
  - Command Mode
    805
  - User Guidelines
    805
  - Example
    805
- switchport access vlan
  805
  - Syntax
    805
  - Default Configuration
    805
  - Command Mode
    806
  - User Guidelines
    806
  - Example
    806
- switchport general forbidden vlan
  806
  - Syntax
    806
  - Default Configuration
    806
  - Command Mode
    807
  - User Guidelines
    807
  - Example
    807
- switchport general acceptable-frame-type tagged-only
  807
  - Syntax
    807
  - Default Configuration
    807
  - Command Mode
    807
  - User Guidelines
    807
  - Example
    808
- switchport general allowed vlan
  808
  - Syntax
    808
  - Default Configuration
    808
  - Command Mode
    808
  - User Guidelines
    809
  - Example
    809
- switchport general ingress-filtering disable
  809
  - Syntax
    809
  - Default Configuration
    809
  - Command Mode
    809
  - User Guidelines
    809
  - Example
    809
- switchport general pvid
  810
  - Syntax
    810
  - Default Configuration
    810
  - Command Mode
    810
  - User Guidelines
    810
  - Example
    810
- switchport mode
  811
  - Syntax
    811
  - Parameter Description
    811
  - Default Configuration
    811
  - Command Mode
    812
  - User Guidelines
    812
  - Example
    812
- switchport trunk
  812
  - Syntax
    812
  - Parameter Description
    813
  - Default Configuration
    813
  - Command Mode
    813
  - User Guidelines
    814
  - Example
    814
- vlan
  814
  - Syntax
    814
  - Default Configuration
    814
  - Command Mode
    814
  - User Guidelines
    815
  - Example
    815
- vlan (Global Config)
  815
  - Syntax
    815
  - Parameter Description
    815
  - Default Configuration
    815
  - Command Mode
    815
  - User Guidelines
    816
  - Example
    816
- vlan association mac
  816
  - Syntax
    816
  - Default Configuration
    816
  - Command Mode
    816
  - User Guidelines
    816
  - Example
    816
- vlan association subnet
  817
  - Syntax
    817
  - Default Configuration
    817
  - Command Mode
    817
  - User Guidelines
    817
  - Example
    817
- vlan database
  817
  - Syntax
    818
  - Default Configuration
    818
  - Command Mode
    818
  - User Guidelines
    818
  - Example
    818
- vlan makestatic
  818
  - Syntax
    818
  - Default Configuration
    818
  - Command Mode
    818
  - User Guidelines
    819
  - Example
    819
- vlan protocol group
  819
  - Syntax
    819
  - Default Configuration
    819
  - Command Mode
    819
  - User Guidelines
    819
  - Example
    819
- vlan protocol group add protocol
  820
  - Syntax
    820
  - Default Configuration
    820
  - Command Mode
    820
  - User Guidelines
    820
  - Example
    820
- vlan protocol group name
  821
  - Syntax
    821
  - Default Configuration
    821
  - Command Mode
    821
  - User Guidelines
    821
  - Example
    821
- vlan protocol group remove
  821
  - Syntax
    821
  - Default Configuration
    822
  - Command Mode
    822
  - User Guidelines
    822
  - Example
    822
- switchport private-vlan
  822
  - Syntax
    822
  - Parameter Description
    823
  - Default Configuration
    823
  - Command Mode
    823
  - User Guidelines
    823
- switchport mode private-vlan
  823
  - Syntax
    823
  - Parameter Description
    824
  - Default Configuration
    824
  - Command Mode
    824
  - User Guidelines
    824
- private-vlan
  824
  - Syntax
    824
  - Parameter Description
    825
  - Default Configuration
    825
  - Command Mode
    825
  - User Guidelines
    825
  - Examples
    826
- show vlan private-vlan
  826
  - Syntax
    826
  - Parameter Description
    827
  - Default Configuration
    827
  - Command Mode
    827
  - User Guidelines
    827
Voice VLAN Commands
829
- Commands in this Chapter
  830
- voice vlan
  830
  - Syntax
    830
  - Parameter Ranges
    830
  - Command Mode
    830
  - Usage Guidelines
    830
  - Default Value
    830
- voice vlan (Interface)
  830
  - Syntax
    831
  - Parameter Description
    831
  - Default Configuration
    831
  - Command Mode
    831
  - User Guidelines
    831
  - Example
    832
- voice vlan data priority
  832
  - Syntax
    832
  - Command Mode
    832
  - Default Value
    832
  - Example
    832
- show voice vlan
  832
  - Syntax
    833
  - Command Mode
    833
  - Example
    833
802.1x Commands
835
- Local 802.1X Authentication Server
  835
- MAC Authentication Bypass
  836
- Guest VLAN
  837
- 802.1x Monitor Mode
  837
- RADIUS-based Dynamic VLAN Assignment
  838
- Commands in this Chapter
  838
- dot1x dynamic-vlan enable
  839
  - Syntax
    839
  - Parameter Description
    839
  - Default Configuration
    839
  - Command Mode
    839
  - User Guidelines
    839
- dot1x initialize
  840
  - Syntax
    840
  - Syntax Description
    840
  - Default Configuration
    840
  - Command Mode
    840
  - User Guidelines
    840
- dot1x mac-auth-bypass
  840
  - Syntax
    840
  - Default Configuration
    840
  - Command Mode
    841
  - User Guidelines
    841
  - Example
    841
- dot1x max-req
  841
  - Syntax
    841
  - Default Configuration
    841
  - Command Mode
    841
  - User Guidelines
    841
  - Example
    842
- dot1x max-users
  842
  - Syntax
    842
  - Default Configuration
    842
  - Command Mode
    842
  - User Guidelines
    842
  - Example
    842
- dot1x port-control
  843
  - Syntax
    843
  - Default Configuration
    843
  - Command Mode
    843
  - User Guidelines
    843
  - Example
    844
- dot1x re-authenticate
  844
  - Syntax
    844
  - Default Configuration
    844
  - Command Mode
    844
  - User Guidelines
    844
  - Example
    844
- dot1x reauthentication
  845
  - Syntax
    845
  - Default Configuration
    845
  - Command Mode
    845
  - User Guidelines
    845
  - Example
    845
- dot1x system-auth-control
  845
  - Syntax
    845
  - Default Configuration
    846
  - Command Mode
    846
  - User Guidelines
    846
  - Example
    846
- dot1x system-auth-control monitor
  846
  - Syntax
    846
  - Parameter Description
    846
  - Default Configuration
    846
  - Command Mode
    846
  - User Guidelines
    846
  - Example
    847
- dot1x timeout guest-vlan-period
  847
  - Syntax
    847
  - Default Configuration
    847
  - Command Mode
    847
  - User Guidelines
    847
  - Example
    847
- dot1x timeout quiet-period
  848
  - Syntax
    848
  - Default Configuration
    848
  - Command Mode
    848
  - User Guidelines
    848
  - Example
    848
- dot1x timeout re-authperiod
  849
  - Syntax
    849
  - Default Configuration
    849
  - Command Mode
    849
  - User Guidelines
    849
  - Example
    849
- dot1x timeout server-timeout
  849
  - Syntax
    850
  - Default Configuration
    850
  - Command Mode
    850
  - User Guidelines
    850
  - Example
    850
- dot1x timeout supp-timeout
  850
  - Syntax
    850
  - Default Configuration
    851
  - Command Mode
    851
  - User Guidelines
    851
  - Example
    851
- dot1x timeout tx-period
  851
  - Syntax
    851
  - Default Configuration
    851
  - Command Mode
    852
  - User Guidelines
    852
  - Example
    852
- show dot1x
  852
  - Syntax
    852
  - Parameter Description
    852
  - Default Configuration
    852
  - Command Mode
    853
  - User Guidelines
    853
  - Example
    853
- show dot1x authentication-history
  853
  - Syntax
    853
  - Parameter Description
    854
  - Default Configuration
    854
  - Command Mode
    854
  - User Guidelines
    854
  - Example
    854
- show dot1x clients
  855
  - Syntax
    855
  - Parameter Description
    856
  - Default Configuration
    856
  - Command Mode
    856
  - User Guidelines
    856
  - Example
    857
- show dot1x interface
  858
  - Syntax
    858
  - Default Configuration
    858
  - Command Mode
    858
  - User Guidelines
    858
  - Example
    858
- show dot1x interface statistics
  859
  - Syntax
    859
  - Default Configuration
    859
  - Command Mode
    859
  - User Guidelines
    859
  - Example
    859
- show dot1x users
  861
  - Syntax
    861
  - Default Configuration
    861
  - Command Mode
    861
  - User Guidelines
    861
  - Example
    861
- clear dot1x authentication–history
  862
  - Syntax
    862
  - Parameter Description
    862
  - Default Configuration
    862
  - Command Mode
    862
  - User Guidelines
    863
  - Example
    863
- dot1x guest-vlan
  863
  - Syntax
    863
  - Default Configuration
    863
  - Command Mode
    863
  - User Guidelines
    863
  - Example
    864
- dot1x unauth-vlan
  864
  - Syntax
    864
  - Default Configuration
    864
  - Command Mode
    864
  - User Guidelines
    864
  - Example
    864
- show dot1x advanced
  864
  - Syntax
    865
  - Default Configuration
    865
  - Command Mode
    865
  - User Guidelines
    865
  - Example
    865
Data Center Technology Commands
867
Data Center Bridging Commands
869
- Data Center Bridging Exchange Protocol
  869
  - Enhanced Transmission Selection
    870
  - Data Center Bridging Exchange Protocol Main Objective
    872
- Interoperability with IEEE DCBX
  873
- Port Roles
  874
  - Manual
    874
  - Auto-Upstream
    874
  - Auto-Downstream
    875
  - Configuration Source
    875
  - Configuration Source Port Selection Process
    876
- Commands in this Chapter
  877
- Data Center Bridging Capability Exchange Commands
  878
- datacenter-bridging
  878
  - Syntax
    878
  - Default Configuration
    878
  - Command Mode
    878
  - User Guidelines
    878
  - Example
    878
- lldp dcbx version
  879
  - Syntax
    879
  - Parameter Description
    879
  - Default Configuration
    879
  - Command Mode
    879
  - User Guidelines
    880
  - Example
    880
- lldp tlv-select dcbxp (dcb enable)
  880
  - Syntax
    880
  - Parameter Description
    880
  - Default Configuration
    881
  - Command Mode
    881
  - User Guidelines
    881
  - Example
    881
- lldp dcbx port-role
  881
  - Syntax
    882
  - Parameter Description
    882
  - Default Configuration
    882
  - Command Mode
    882
  - User Guidelines
    883
  - Examples
    883
- show lldp tlv-select
  883
  - Syntax
    883
  - Parameter Description
    883
  - Default Configuration
    883
  - Command Mode
    883
  - User Guidelines
    883
  - Examples
    884
- show lldp dcbx
  884
  - Syntax
    884
  - Parameter Description
    884
  - Default Configuration
    884
  - Command Mode
    884
  - User Guidelines
    885
  - Example #1
    885
  - Example #2
    885
  - Example #3
    885
  - Example #4
    887
  - Example #5
    887
- Enhanced Transmission Selection (ETS) Commands
  889
- classofservice traffic-class-group
  889
  - Syntax
    889
  - Parameter Description
    889
  - Default Configuration
    889
  - Command Mode
    889
  - User Guidelines
    890
  - Example
    890
- traffic-class-group max-bandwidth
  890
  - Syntax
    891
  - Parameter Description
    891
  - Default Configuration
    891
  - Command Mode
    891
  - User Guidelines
    891
  - Example
    892
- traffic-class-group min-bandwidth
  892
  - Syntax
    892
  - Parameter Description
    892
  - Default Configuration
    892
  - Command Mode
    892
  - User Guidelines
    893
  - Example
    893
- traffic-class-group strict
  893
  - Syntax
    893
  - Parameter Description
    894
  - Default Configuration
    894
  - Command Mode
    894
  - User Guidelines
    894
  - Example
    895
- traffic-class-group weight
  895
  - Syntax
    895
  - Parameter Description
    895
  - Default Configuration
    895
  - Command Mode
    895
  - User Guidelines
    896
  - Example
    896
- show classofservice traffic-class-group
  896
  - Syntax
    896
  - Parameter Description
    896
  - Default Configuration
    896
  - Command Mode
    897
  - User Guidelines
    897
  - Example
    897
- show interfaces traffic-class-group
  897
  - Syntax
    898
  - Parameter Description
    898
  - Default Configuration
    898
  - Command Mode
    898
  - User Guidelines
    898
  - Example
    899
FIP Snooping Commands
901
- Setting Up FIP Snooping
  901
- Commands in this Chapter
  902
- feature fip-snooping
  903
  - Syntax
    903
  - Default Configuration
    903
  - Command Mode
    903
  - User Guidelines
    903
  - Example
    904
- fip-snooping enable
  904
  - Syntax
    904
  - Default Configuration
    904
  - Command Mode
    904
  - User Guidelines
    904
  - Example
    905
- fip-snooping fc-map
  905
  - Syntax
    905
  - Parameter Description
    905
  - Default Configuration
    905
  - Command Mode
    905
  - User Guidelines
    905
  - Example
    906
- fip-snooping port-mode
  906
  - Syntax
    906
  - Parameter Description
    906
  - Default Configuration
    906
  - Command Mode
    906
  - User Guidelines
    907
  - Example
    907
- show fip-snooping
  907
  - Syntax
    907
  - Default Configuration
    907
  - Command Mode
    907
  - User Guidelines
    907
  - Default Configuration
    908
  - Command Mode
    908
  - User Guidelines
    908
  - Example
    908
- show fip-snooping enode
  909
  - Syntax
    909
  - Parameter Description
    909
  - Default Configuration
    909
  - Command Mode
    909
  - User Guidelines
    909
  - Example #1
    910
- show fip-snooping fcf
  911
  - Syntax
    911
  - Parameter Description
    911
  - Default Configuration
    911
  - Command Mode
    911
  - User Guidelines
    912
  - Example #1
    913
  - Example #2
    913
- show fip-snooping sessions
  914
  - Syntax
    914
  - Parameter Description
    914
  - Default Configuration
    915
  - Command Mode
    915
  - User Guidelines
    915
  - Example #1
    917
  - Example #2
    918
  - Example #3
    919
- show fip-snooping statistics
  920
  - Syntax
    920
  - Parameter Description
    920
  - Default Configuration
    920
  - Command Mode
    920
  - User Guidelines
    920
  - Example #1
    922
  - Example #2
    924
  - Example #3
    926
- show fip-snooping vlan
  927
  - Syntax
    927
  - Parameter Description
    927
  - Default Configuration
    928
  - Command Mode
    928
  - User Guidelines
    928
  - Example
    928
- clear fip-snooping statistics
  928
  - Syntax
    929
  - Parameter Description
    929
  - Default Configuration
    929
  - Command Mode
    929
  - User Guidelines
    929
Priority Flow Control Commands
931
- Commands in this Chapter
  932
- priority-flow-control mode
  932
  - Syntax
    932
  - Parameter Description
    933
  - Default Configuration
    933
  - Command Mode
    933
  - User Guidelines
    933
  - Example
    933
- priority-flow-control priority
  934
  - Syntax
    934
  - Parameter Description
    934
  - Default Configuration
    934
  - Command Mode
    934
  - User Guidelines
    934
  - Example
    934
- clear priority-flow-control statistics
  935
  - Syntax
    935
  - Command Mode
    935
  - User Guidelines
    935
  - Example #1
    935
  - Example #2
    935
- show interfaces priority-flow-control
  935
  - Syntax
    935
  - Parameter Description
    936
  - Command Mode
    936
  - User Guidelines
    936
  - Examples
    936
Layer 3 Commands
939
ARP Commands
941
- ARP Aging
  942
- Commands in this Chapter
  942
- arp
  942
  - Syntax
    943
  - Default Configuration
    943
  - Command Mode
    943
  - User Guidelines
    943
  - Example
    943
- arp cachesize
  943
  - Syntax
    943
  - Default Configuration
    944
  - Command Mode
    944
  - User Guidelines
    944
  - Example
    944
- arp dynamicrenew
  944
  - Syntax
    944
  - Default Configuration
    944
  - Command Mode
    944
  - User Guidelines
    944
  - Example
    945
- arp purge
  945
  - Syntax
    945
  - Default Configuration
    945
  - Command Mode
    946
  - User Guidelines
    946
  - Example
    946
- arp resptime
  946
  - Syntax
    946
  - Default Configuration
    946
  - Command Mode
    946
  - User Guidelines
    946
  - Example
    946
- arp retries
  947
  - Syntax
    947
  - Default Configuration
    947
  - Command Mode
    947
  - User Guidelines
    947
  - Example
    947
- arp timeout
  947
  - Syntax
    947
  - Default Configuration
    948
  - Command Mode
    948
  - User Guidelines
    948
  - Example
    948
- clear arp-cache
  948
  - Syntax
    948
  - Default Configuration
    948
  - Command Mode
    948
  - User Guidelines
    948
  - Example
    948
- clear arp-cache management
  949
  - Syntax
    949
  - Default Configuration
    949
  - Command Mode
    949
  - User Guidelines
    949
  - Example
    949
- ip local-proxy-arp
  950
  - Syntax
    950
  - Default Configuration
    950
  - Command Mode
    950
  - User Guidelines
    950
- ip proxy-arp
  950
  - Syntax
    950
  - Default Configuration
    951
  - Command Mode
    951
  - User Guidelines
    951
  - Example
    951
- show arp
  951
  - Syntax
    951
  - Default Configuration
    951
  - Command Mode
    951
  - User Guidelines
    952
  - Example
    952
DHCP Server and Relay Agent Commands
953
- Commands in this Chapter
  954
- ip dhcp pool
  954
  - Syntax
    955
  - Parameter Description
    955
  - Default Configuration
    955
  - Command Mode
    955
  - User Guidelines
    955
  - Examples
    956
- bootfile
  957
  - Syntax
    957
  - Parameter Description
    957
  - Default Configuration
    957
  - Command Mode
    957
  - User Guidelines
    957
  - Example
    957
- clear ip dhcp binding
  958
  - Syntax
    958
  - Parameter Description
    958
  - Default Configuration
    958
  - Command Mode
    958
  - User Guidelines
    958
  - Example
    958
- clear ip dhcp conflict
  958
  - Syntax
    958
  - Parameter Description
    959
  - Default Configuration
    959
  - Command Mode
    959
  - User Guidelines
    959
  - Example
    959
- client-identifier
  959
  - Syntax
    959
  - Parameter Description
    959
  - Default Configuration
    960
  - Command Mode
    960
  - User Guidelines
    960
  - Example
    960
- client-name
  960
  - Syntax
    960
  - Parameter Description
    960
  - Default Configuration
    960
  - Command Mode
    961
  - User Guidelines
    961
  - Example
    961
- default-router
  961
  - Syntax
    961
  - Parameter Description
    961
  - Default Configuration
    961
  - Command Mode
    962
  - User Guidelines
    962
  - Example
    962
- dns-server (IP DHCP Pool Config)
  962
  - Syntax
    962
  - Parameter Description
    962
  - Default Configuration
    962
  - Command Mode
    962
  - User Guidelines
    962
- domain-name (IP DHCP Pool Config)
  963
  - Syntax
    963
  - Default Configuration
    963
  - Command Mode
    963
- hardware-address
  963
  - Syntax
    963
  - Parameter Description
    963
  - Default Configuration
    964
  - Command Mode
    964
  - User Guidelines
    964
  - Example
    964
- host
  964
  - Syntax
    964
  - Parameter Description
    964
  - Default Configuration
    965
  - Command Mode
    965
  - User Guidelines
    965
  - Example
    965
- ip dhcp bootp automatic
  965
  - Syntax
    965
  - Parameter Description
    965
  - Default Configuration
    965
  - Command Mode
    966
  - User Guidelines
    966
  - Example
    966
- ip dhcp conflict logging
  966
  - Syntax
    966
  - Parameter Description
    966
  - Default Configuration
    966
  - Command Mode
    966
  - User Guidelines
    966
  - Example
    966
- ip dhcp excluded-address
  967
  - Syntax
    967
  - Parameter Description
    967
  - Default Configuration
    967
  - Command Mode
    967
  - User Guidelines
    967
  - Example
    967
- ip dhcp ping packets
  968
  - Syntax
    968
  - Parameter Description
    968
  - Default Configuration
    968
  - Command Mode
    968
  - User Guidelines
    968
  - Example
    968
- lease
  969
  - Syntax
    969
  - Parameter Description
    969
  - Default Configuration
    969
  - Command Mode
    969
  - User Guidelines
    969
  - Example
    970
- netbios-name-server
  970
  - Syntax
    970
  - Parameter Description
    970
  - Default Configuration
    970
  - Command Mode
    970
  - User Guidelines
    970
  - Example
    970
- netbios-node-type
  971
  - Syntax
    971
  - Parameter Description
    971
  - Default Configuration
    971
  - Command Mode
    971
  - User Guidelines
    971
  - Example
    971
- network
  972
  - Syntax
    972
  - Parameter Description
    972
  - Default Configuration
    972
  - Command Mode
    972
- next-server
  972
  - Syntax
    972
  - Parameter Description
    973
  - Default Configuration
    973
  - Command Mode
    973
  - User Guidelines
    973
  - Example
    973
- option
  973
  - Syntax
    973
  - Parameter Description
    974
  - Default Configuration
    974
  - Command Mode
    974
  - User Guidelines
    974
  - Example
    977
- service dhcp
  977
  - Syntax
    977
  - Default Configuration
    978
  - Command Mode
    978
  - User Guidelines
    978
- sntp
  978
  - Syntax
    978
  - Parameter Description
    978
  - Default Configuration
    978
  - Command Mode
    978
  - User Guidelines
    978
  - Example
    979
- show ip dhcp binding
  979
  - Syntax
    979
  - Parameter Description
    979
  - Default Configuration
    979
  - Command Mode
    979
  - User Guidelines
    979
  - Example
    979
- show ip dhcp conflict
  980
  - Syntax
    980
  - Parameter Description
    980
  - Default Configuration
    980
  - Command Mode
    980
  - User Guidelines
    980
- show ip dhcp global configuration
  980
  - Syntax
    980
  - Parameter Description
    980
  - Default Configuration
    981
  - Command Mode
    981
  - User Guidelines
    981
  - Example
    981
- show ip dhcp pool
  981
  - Syntax
    981
  - Parameter Description
    981
  - Default Configuration
    981
  - Command Mode
    981
  - User Guidelines
    981
- show ip dhcp server statistics
  982
  - Syntax
    982
  - Parameter Description
    982
  - Default Configuration
    982
  - Command Mode
    982
  - User Guidelines
    982
  - Example
    982
DHCPv6 Commands
985
- clear ipv6 dhcp
  985
  - Syntax
    985
  - Default Configuration
    985
  - Command Mode
    985
  - User Guidelines
    985
  - Examples
    986
- dns-server (IPv6 DHCP Pool Config)
  986
  - Syntax
    986
  - Parameter Description
    986
  - Default Configuration
    986
  - Command Mode
    986
  - User Guidelines
    986
- domain-name (IPv6 DHCP Pool Config)
  986
  - Syntax
    987
  - Default Configuration
    987
  - Command Mode
    987
  - User Guidelines
    987
  - Example
    987
- ipv6 dhcp pool
  987
  - Syntax
    987
  - Default Configuration
    988
  - Command Mode
    988
  - User Guidelines
    988
  - Example
    988
- ipv6 dhcp relay
  988
  - Syntax
    988
  - Default Configuration
    989
  - Command Mode
    989
  - User Guidelines
    989
  - Example
    989
- ipv6 dhcp server
  989
  - Syntax
    989
  - Default Configuration
    990
  - Command Mode
    990
  - User Guidelines
    990
  - Example
    990
- prefix-delegation
  990
  - Syntax
    990
  - Parameter Description
    991
  - Default Configuration
    991
  - Command Mode
    991
  - User Guidelines
    991
  - Example
    991
- service dhcpv6
  992
  - Syntax
    992
  - Default Configuration
    992
  - Command Mode
    992
  - User Guidelines
    992
  - Example
    992
- show ipv6 dhcp
  993
  - Syntax
    993
  - Syntax Description
    993
  - Default Configuration
    993
  - Command Mode
    993
  - User Guidelines
    993
  - Example
    993
- show ipv6 dhcp binding
  993
  - Syntax
    993
  - Default Configuration
    994
  - Command Mode
    994
  - User Guidelines
    994
  - Example
    994
- show ipv6 dhcp interface (User EXEC)
  994
  - Syntax
    994
  - Syntax Description
    994
  - Default Configuration
    995
  - Command Mode
    995
  - User Guidelines
    995
  - Examples
    995
- show ipv6 dhcp interface (Privileged EXEC)
  996
  - Syntax
    996
  - Syntax Description
    996
  - Default Configuration
    996
  - Command Mode
    997
  - User Guidelines
    997
  - Example
    998
- show ipv6 dhcp pool
  1000
  - Syntax
    1000
  - Default Configuration
    1000
  - Command Mode
    1000
  - User Guidelines
    1000
  - Example
    1000
- show ipv6 dhcp statistics
  1000
  - Syntax
    1000
  - Default Configuration
    1000
  - Command Mode
    1001
  - User Guidelines
    1001
  - Example
    1001
DVMRP Commands
1003
- Commands in this Chapter
  1003
- ip dvmrp
  1003
  - Syntax
    1003
  - Default Configuration
    1004
  - Command Mode
    1004
  - User Guidelines
    1004
  - Example
    1004
- ip dvmrp metric
  1004
  - Syntax
    1004
  - Default Configuration
    1004
  - Command Mode
    1004
  - User Guidelines
    1005
  - Example
    1005
- show ip dvmrp
  1005
  - Syntax
    1005
  - Default Configuration
    1005
  - Command Mode
    1005
  - User Guidelines
    1005
  - Example
    1005
- show ip dvmrp interface
  1006
  - Syntax
    1006
  - Default Configuration
    1006
  - Command Mode
    1006
  - User Guidelines
    1006
  - Example
    1006
- show ip dvmrp neighbor
  1006
  - Syntax
    1006
  - Default Configuration
    1007
  - Command Mode
    1007
  - User Guidelines
    1007
  - Example
    1007
- show ip dvmrp nexthop
  1007
  - Syntax
    1007
  - Default Configuration
    1007
  - Command Mode
    1007
  - User Guidelines
    1007
  - Example
    1008
- show ip dvmrp prune
  1008
  - Syntax
    1008
  - Default Configuration
    1008
  - Command Mode
    1008
  - User Guidelines
    1008
  - Example
    1008
- show ip dvmrp route
  1009
  - Syntax
    1009
  - Default Configuration
    1009
  - Command Mode
    1009
  - User Guidelines
    1009
  - Example
    1009
GMRP Commands
1011
- Commands in this Chapter
  1012
- gmrp enable
  1012
  - Syntax
    1012
  - Parameter Description
    1012
  - Default Configuration
    1012
  - Command Mode
    1012
  - User Guidelines
    1013
  - Example
    1013
- show gmrp configuration
  1013
  - Syntax
    1013
  - Parameter Description
    1013
  - Default Configuration
    1013
  - Command Mode
    1013
  - User Guidelines
    1013
  - Example
    1013
IGMP Commands
1015
- Commands in this Chapter
  1016
- ip igmp
  1016
  - Syntax
    1017
  - Default Configuration
    1017
  - Command Mode
    1017
  - User Guidelines
    1017
  - Example
    1017
- ip igmp last-member-query-count
  1017
  - Syntax
    1017
  - Default Configuration
    1017
  - Command Mode
    1018
  - User Guidelines
    1018
  - Example
    1018
- ip igmp last-member-query-interval
  1018
  - Syntax
    1018
  - Default Configuration
    1018
  - Command Mode
    1018
  - User Guidelines
    1018
  - Example
    1019
- ip igmp query-interval
  1019
  - Syntax
    1019
  - Default Configuration
    1019
  - Command Mode
    1019
  - User Guidelines
    1019
  - Example
    1019
- ip igmp query-max-response-time
  1020
  - Syntax
    1020
  - Default Configuration
    1020
  - Command Mode
    1020
  - User Guidelines
    1020
  - Example
    1020
- ip igmp robustness
  1020
  - Syntax
    1021
  - Default Configuration
    1021
  - Command Mode
    1021
  - User Guidelines
    1021
  - Example
    1021
- ip igmp startup-query-count
  1021
  - Syntax
    1021
  - Default Configuration
    1021
  - Command Mode
    1022
  - User Guidelines
    1022
  - Example
    1022
- ip igmp startup-query-interval
  1022
  - Syntax
    1022
  - Default Configuration
    1022
  - Command Mode
    1022
  - User Guidelines
    1022
  - Example
    1023
- ip igmp version
  1023
  - Syntax
    1023
  - Default Configuration
    1023
  - Command Mode
    1023
  - User Guidelines
    1023
  - Example
    1023
- show ip igmp
  1023
  - Syntax
    1024
  - Default Configuration
    1024
  - Command Mode
    1024
  - User Guidelines
    1024
  - Example
    1024
- show ip igmp groups
  1024
  - Syntax
    1025
  - Syntax Description
    1025
  - Default Configuration
    1025
  - Command Mode
    1025
  - User Guidelines
    1025
  - Example
    1025
- show ip igmp interface
  1025
  - Syntax
    1025
  - Syntax Description
    1026
  - Default Configuration
    1026
  - Command Mode
    1026
  - User Guidelines
    1026
  - Example
    1026
- show ip igmp membership
  1027
  - Syntax
    1027
  - Default Configuration
    1027
  - Command Mode
    1027
  - User Guidelines
    1027
  - Examples
    1027
- show ip igmp interface stats
  1027
  - Syntax
    1027
  - Default Configuration
    1028
  - Command Mode
    1028
  - User Guidelines
    1028
  - Examples
    1028
- ip igmp router-alert-check
  1028
  - Syntax
    1028
  - Default Value
    1029
  - Command Mode
    1029
  - Usage Guidelines
    1029
  - Example
    1029
IGMP Proxy Commands
1031
- Commands in this Chapter
  1031
- ip igmp-proxy
  1031
  - Syntax
    1031
  - Default Configuration
    1032
  - Command Mode
    1032
  - User Guidelines
    1032
  - Example
    1032
- ip igmp-proxy reset-status
  1032
  - Syntax
    1032
  - Default Configuration
    1032
  - Command Mode
    1032
  - User Guidelines
    1032
  - Example
    1033
- ip igmp-proxy unsolicit-rprt-interval
  1033
  - Syntax
    1033
  - Default Configuration
    1033
  - Command Mode
    1033
  - User Guidelines
    1033
  - Example
    1033
- show ip igmp-proxy
  1034
  - Syntax
    1034
  - Default Configuration
    1034
  - Command Mode
    1034
  - User Guidelines
    1034
  - Example
    1034
- show ip igmp-proxy interface
  1035
  - Syntax
    1035
  - Default Configuration
    1035
  - Command Mode
    1035
  - User Guidelines
    1035
  - Example
    1035
- show ip igmp-proxy groups
  1036
  - Syntax
    1036
  - Default Configuration
    1036
  - Command Mode
    1036
  - User Guidelines
    1036
  - Example
    1036
- show ip igmp-proxy groups detail
  1036
  - Syntax
    1036
  - Default Configuration
    1037
  - Command Mode
    1037
  - User Guidelines
    1037
  - Example
    1037
IP Helper/DHCP Relay Commands
1039
- Commands in this Chapter
  1041
- bootpdhcprelay maxhopcount
  1041
  - Syntax
    1041
  - Default Configuration
    1041
  - Command Mode
    1042
  - User Guidelines
    1042
  - Example
    1042
- bootpdhcprelay minwaittime
  1042
  - Syntax
    1042
  - Default Configuration
    1042
  - Command Mode
    1042
  - User Guidelines
    1042
  - Example
    1043
- clear ip helper statistics
  1043
  - Syntax
    1043
  - Default Configuration
    1043
  - Command Mode
    1043
  - User Guidelines
    1043
  - Example
    1043
- ip dhcp relay information check
  1043
  - Syntax
    1043
  - Parameter Description
    1044
  - Default Configuration
    1044
  - Command Mode
    1044
  - User Guidelines
    1044
  - Example
    1044
- ip dhcp relay information check-reply
  1044
  - Syntax
    1044
  - Parameter Description
    1045
  - Default Configuration
    1045
  - Command Mode
    1045
  - User Guidelines
    1045
  - Example
    1045
- ip dhcp relay information option
  1045
  - Syntax
    1045
  - Default Configuration
    1046
  - Command Mode
    1046
  - User Guidelines
    1046
  - Example
    1046
- ip dhcp relay information option-insert
  1046
  - Syntax
    1046
  - Parameter Description
    1046
  - Default Configuration
    1046
  - Command Mode
    1047
  - User Guidelines
    1047
  - Example
    1047
- ip helper-address (global configuration)
  1047
  - Syntax
    1047
  - Default Configuration
    1048
  - Command Mode
    1048
  - User Guidelines
    1048
  - Example
    1048
- ip helper-address (interface configuration)
  1049
  - Syntax
    1049
  - Default Configuration
    1049
  - Command Mode
    1049
  - User Guidelines
    1050
  - Example
    1050
- ip helper enable
  1051
  - Syntax
    1051
  - Default Configuration
    1051
  - Command Mode
    1051
  - User Guidelines
    1051
  - Example
    1051
- show ip helper-address
  1051
  - Syntax
    1052
  - Default Configuration
    1052
  - Command Mode
    1052
  - User Guidelines
    1052
  - Example
    1052
- show ip dhcp relay
  1053
  - Syntax
    1053
  - Parameter Description
    1053
  - Default Configuration
    1053
  - Command Mode
    1053
  - User Guidelines
    1053
- show ip helper statistics
  1054
  - Syntax
    1054
  - Default Configuration
    1054
  - Command Mode
    1054
  - User Guidelines
    1054
  - Example
    1055
IP Routing Commands
1057
- Static Routes/ECMP Static Routes
  1057
- Static Reject Routes
  1058
- Default Routes
  1058
- Commands in this Chapter
  1058
- encapsulation
  1059
  - Syntax
    1059
  - Default Configuration
    1059
  - Command Mode
    1059
  - User Guidelines
    1059
  - Example
    1059
- ip address
  1059
  - Syntax
    1060
  - Default Configuration
    1060
  - Command Mode
    1060
  - User Guidelines
    1060
  - Example
    1060
- ip mtu
  1061
  - Syntax
    1061
  - Parameter Description
    1061
  - Default Configuration
    1061
  - Command Mode
    1061
  - User Guidelines
    1061
  - Example
    1062
- ip netdirbcast
  1062
  - Syntax
    1062
  - Default Configuration
    1062
  - Command Mode
    1062
  - User Guidelines
    1062
  - Example
    1062
- ip route
  1063
  - Syntax
    1063
  - Default Configuration
    1063
  - Command Mode
    1063
  - User Guidelines
    1063
  - Example
    1064
- ip route default
  1064
  - Syntax
    1064
  - Default Configuration
    1064
  - Command Mode
    1064
  - User Guidelines
    1064
  - Example
    1065
- ip route distance
  1065
  - Syntax
    1065
  - Default Configuration
    1065
  - Command Mode
    1066
  - User Guidelines
    1066
  - Example
    1066
- ip routing
  1066
  - Syntax
    1066
  - Default Configuration
    1066
  - Command Mode
    1066
  - User Guidelines
    1066
  - Example
    1066
- show ip brief
  1067
  - Syntax
    1067
  - Default Configuration
    1067
  - Command Mode
    1067
  - User Guidelines
    1067
  - Example
    1067
- show ip interface
  1067
  - Syntax
    1067
  - Syntax Description
    1068
  - Default Configuration
    1068
  - Command Mode
    1068
  - User Guidelines
    1068
  - Example
    1068
- show ip protocols
  1070
  - Syntax
    1070
  - Parameter Description
    1070
  - Default Configuration
    1072
  - Command Mode
    1073
  - User Guidelines
    1073
  - Example
    1073
- show ip route
  1074
  - Syntax
    1075
  - Syntax Description
    1075
  - Default Configuration
    1075
  - Command Mode
    1075
  - User Guidelines
    1075
  - Example
    1076
- show ip route configured
  1076
  - Syntax
    1076
  - Default Configuration
    1076
  - Command Mode
    1076
  - User Guidelines
    1076
  - Example
    1076
- show ip route connected
  1077
  - Syntax
    1077
  - Default Configuration
    1077
  - Command Mode
    1077
  - User Guidelines
    1077
  - Example
    1077
- show ip route preferences
  1078
  - Syntax
    1078
  - Default Configuration
    1078
  - Command Mode
    1078
  - User Guidelines
    1078
  - Example
    1079
- show ip route summary
  1079
  - Syntax
    1079
  - Parameter Description
    1079
  - Default Configuration
    1079
  - Command Mode
    1079
  - User Guidelines
    1080
  - Example
    1080
- show ip traffic
  1080
  - Syntax
    1080
  - Syntax Description
    1080
  - Default Configuration
    1080
  - Command Mode
    1081
  - User Guidelines
    1081
  - Example
    1081
- show ip vlan
  1083
  - Syntax
    1083
  - Default Configuration
    1083
  - Command Mode
    1083
  - User Guidelines
    1083
  - Example
    1083
- show routing heap summary
  1083
  - Syntax
    1084
  - Parameter Description
    1084
  - Default Configuration
    1084
  - Command Mode
    1084
  - User Guidelines
    1084
  - Examples
    1084
IPv6 Routing Commands
1087
- IPv6 Limitations & Restrictions
  1087
- Commands in this Chapter
  1087
- clear ipv6 neighbors
  1088
  - Syntax
    1088
  - Default Configuration
    1088
  - Command Mode
    1088
  - User Guidelines
    1088
  - Example
    1089
- clear ipv6 statistics
  1089
  - Syntax
    1089
  - Default Configuration
    1089
  - Command Mode
    1089
  - User Guidelines
    1089
  - Example
    1089
- ipv6 address
  1090
  - Syntax
    1090
  - Default Configuration
    1090
  - Command Mode
    1090
  - User Guidelines
    1091
  - Example
    1091
- ipv6 enable
  1091
  - Syntax
    1091
  - Default Configuration
    1091
  - Command Mode
    1091
  - User Guidelines
    1091
  - Example
    1091
- ipv6 hop-limit
  1092
  - Syntax
    1092
  - Parameter Description
    1092
  - Default Configuration
    1092
  - Command Mode
    1092
- ipv6 host
  1092
  - Syntax
    1092
  - Default Configuration
    1093
  - Command Mode
    1093
  - User Guidelines
    1093
  - Example
    1093
- ipv6 mld last-member-query-count
  1093
  - Syntax
    1093
  - Default Configuration
    1093
  - Command Mode
    1093
  - User Guidelines
    1093
  - Example
    1094
- ipv6 mld last-member-query-interval
  1094
  - Syntax
    1094
  - Default Configuration
    1094
  - Command Mode
    1094
  - User Guidelines
    1094
  - Example
    1094
- ipv6 mld-proxy
  1094
  - Syntax
    1095
  - Default Configuration
    1095
  - Command Mode
    1095
  - User Guidelines
    1095
  - Example
    1095
- ipv6 mld-proxy reset-status
  1095
  - Syntax
    1095
  - Command Mode
    1095
  - Default Configuration
    1095
  - User Guidelines
    1095
  - Example
    1096
- ipv6 mld-proxy unsolicit-rprt-interval
  1096
  - Syntax
    1096
  - Default Configuration
    1096
  - Command Mode
    1096
  - User Guidelines
    1096
  - Example
    1096
- ipv6 mld query-interval
  1096
  - Syntax
    1097
  - Default Configuration
    1097
  - Command Mode
    1097
  - User Guidelines
    1097
  - Example
    1097
- ipv6 mld query-max-response-time
  1097
  - Syntax
    1097
  - Default Configuration
    1097
  - Command Mode
    1098
  - User Guidelines
    1098
  - Example
    1098
- ipv6 mld router
  1098
  - Syntax
    1098
  - Default Configuration
    1098
  - Command Mode
    1098
  - User Guidelines
    1098
  - Example
    1098
- ipv6 mtu
  1099
  - Syntax
    1099
  - Parameter Description
    1099
  - Default Configuration
    1099
  - Command Mode
    1099
  - User Guidelines
    1099
  - Example
    1099
- ipv6 nd dad attempts
  1100
  - Syntax
    1100
  - Parameter Description
    1100
  - Default Configuration
    1100
  - Command Mode
    1100
  - User Guidelines
    1100
  - Example
    1100
- ipv6 nd managed-config-flag
  1101
  - Syntax
    1101
  - Default Configuration
    1101
  - Command Mode
    1101
  - User Guidelines
    1101
  - Example
    1101
- ipv6 nd ns-interval
  1101
  - Syntax
    1101
  - Default Configuration
    1102
  - Command Mode
    1102
  - User Guidelines
    1102
  - Example
    1102
- ipv6 nd other-config-flag
  1102
  - Syntax
    1102
  - Default Configuration
    1102
  - Command Mode
    1102
  - User Guidelines
    1103
  - Example
    1103
- ipv6 nd prefix
  1103
  - Syntax
    1103
  - Syntax Description
    1103
  - Default Configuration
    1104
  - Command Mode
    1104
  - User Guidelines
    1104
  - Example
    1104
- ipv6 nd ra-interval
  1104
  - Syntax
    1104
  - Default Configuration
    1105
  - Command Mode
    1105
  - User Guidelines
    1105
  - Example
    1105
- ipv6 nd ra-lifetime
  1105
  - Syntax
    1105
  - Default Configuration
    1106
  - Command Mode
    1106
  - User Guidelines
    1106
  - Example
    1106
- ipv6 nd reachable-time
  1106
  - Syntax
    1106
  - Default Configuration
    1106
  - Command Mode
    1106
  - User Guidelines
    1107
  - Example
    1107
- ipv6 nd suppress-ra
  1107
  - Syntax
    1107
  - Default Configuration
    1107
  - Command Mode
    1107
  - User Guidelines
    1107
  - Example
    1107
- ipv6 route
  1108
  - Syntax
    1108
  - Syntax Description
    1108
  - Default Configuration
    1109
  - Command Mode
    1109
  - User Guidelines
    1109
  - Example
    1109
- ipv6 route distance
  1109
  - Syntax
    1109
  - Default Configuration
    1109
  - Command Mode
    1110
  - User Guidelines
    1110
  - Example
    1110
- ipv6 unicast-routing
  1110
  - Syntax
    1110
  - Default Configuration
    1110
  - Command Mode
    1110
  - User Guidelines
    1110
  - Example
    1110
- ping ipv6
  1111
  - Syntax
    1111
  - Default Configuration
    1111
  - Command Mode
    1111
  - User Guidelines
    1111
  - Example
    1111
- ping ipv6 interface
  1112
  - Syntax
    1112
  - Default Configuration
    1112
  - Command Mode
    1112
  - User Guidelines
    1112
  - Example
    1112
- show ipv6 brief
  1113
  - Syntax
    1113
  - Default Configuration
    1113
  - Command Mode
    1113
  - User Guidelines
    1113
  - Example
    1113
- show ipv6 interface
  1114
  - Syntax
    1114
  - Syntax Description
    1114
  - Default Configuration
    1114
  - Command Mode
    1114
  - User Guidelines
    1114
  - Examples
    1115
- show ipv6 interface management statistics
  1116
  - Syntax
    1116
  - Parameter Description
    1116
  - Default Configuration
    1116
  - Command Mode
    1117
  - User Guidelines
    1117
  - Example
    1117
- show ipv6 mld groups
  1117
  - Syntax
    1118
  - Default Configuration
    1118
  - Command Mode
    1118
  - User Guidelines
    1118
  - Example
    1119
- show ipv6 mld interface
  1120
  - Syntax
    1120
  - Default Configuration
    1121
  - Command Mode
    1121
  - User Guidelines
    1121
  - Example
    1122
- show ipv6 mld-proxy
  1123
  - Syntax
    1123
  - Command Mode
    1123
  - Default Configuration
    1123
  - User Guidelines
    1123
  - Example
    1124
- show ipv6 mld-proxy groups
  1124
  - Syntax
    1124
  - Default Configuration
    1125
  - Command Mode
    1125
  - User Guidelines
    1125
  - Example
    1125
- show ipv6 mld-proxy groups detail
  1126
  - Syntax
    1126
  - Default Configuration
    1126
  - Command Mode
    1126
  - User Guidelines
    1126
  - Example
    1127
- show ipv6 mld-proxy interface
  1127
  - Syntax
    1128
  - Default Configuration
    1128
  - Command Mode
    1128
  - User Guidelines
    1128
  - Example
    1128
- show ipv6 mld traffic
  1129
  - Syntax
    1129
  - Default Configuration
    1129
  - Command Mode
    1129
  - User Guidelines
    1129
  - Example
    1130
- show ipv6 neighbors
  1130
  - Syntax
    1130
  - Syntax Description
    1130
  - Default Configuration
    1130
  - Command Mode
    1131
  - User Guidelines
    1131
  - Example
    1131
- show ipv6 route
  1131
  - Syntax
    1131
  - Syntax Description
    1131
  - Default Configuration
    1132
  - Command Mode
    1132
  - User Guidelines
    1132
  - Example
    1132
- show ipv6 route preferences
  1133
  - Syntax
    1133
  - Default Configuration
    1133
  - Command Mode
    1133
  - User Guidelines
    1133
  - Example
    1133
- show ipv6 route summary
  1134
  - Syntax
    1134
  - Default Configuration
    1134
  - Command Mode
    1134
  - User Guidelines
    1134
  - Example
    1134
- show ipv6 traffic
  1135
  - Syntax
    1135
  - Default Configuration
    1135
  - Command Mode
    1135
  - User Guidelines
    1135
  - Examples
    1135
- show ipv6 vlan
  1137
  - Syntax
    1137
  - Default Configuration
    1137
  - Command Mode
    1137
  - User Guidelines
    1137
  - Example
    1137
- traceroute ipv6
  1138
  - Syntax
    1138
  - Default Configuration
    1138
  - Command Mode
    1138
  - User Guidelines
    1138
  - Example
    1138
Loopback Interface Commands
1141
- Commands in this Chapter
  1141
- interface loopback
  1141
  - Syntax
    1141
  - Default Configuration
    1141
  - Command Mode
    1141
  - User Guidelines
    1142
  - Example
    1142
- show interfaces loopback
  1142
  - Syntax
    1142
  - Default Configuration
    1142
  - Command Mode
    1142
  - User Guidelines
    1142
  - Examples
    1143
Multicast Commands
1145
- Commands in this Chapter
  1146
- ip mcast boundary
  1146
  - Syntax
    1147
  - Default Configuration
    1147
  - Command Mode
    1147
  - User Guidelines
    1147
  - Example
    1147
- ip mroute
  1147
  - Syntax
    1147
  - Default Configuration
    1148
  - Command Mode
    1148
  - Usage Guidelines
    1148
  - Example
    1148
- ip multicast
  1148
  - Syntax
    1148
  - Default Configuration
    1148
  - Command Mode
    1148
  - User Guidelines
    1149
  - Example
    1149
- ip multicast ttl-threshold
  1149
  - Syntax
    1149
  - Default Configuration
    1150
  - Command Mode
    1150
  - User Guidelines
    1150
  - Example
    1150
- ip pim
  1150
  - Syntax
    1150
  - Default Configuration
    1150
  - Command Mode
    1150
  - User Guidelines
    1150
  - Example
    1151
- ip pim bsr-border
  1151
  - Syntax
    1151
  - Default Configuration
    1151
  - Command Mode
    1151
  - User Guidelines
    1151
  - Example
    1151
- ip pim bsr-candidate
  1152
  - Syntax
    1152
  - Parameter Description
    1152
  - Default Configuration
    1152
  - Command Mode
    1152
  - User Guidelines
    1152
  - Example
    1153
- ip pim dense
  1153
  - Syntax
    1153
  - Default Configuration
    1153
  - Command Mode
    1153
  - User Guidelines
    1153
  - Example
    1153
- ip pim dr-priority
  1153
  - Syntax
    1154
  - Default Configuration
    1154
  - Command Mode
    1154
  - User Guidelines
    1154
  - Example
    1154
- ip pim hello-interval
  1154
  - Syntax
    1154
  - Default Configuration
    1155
  - Command Mode
    1155
  - User Guidelines
    1155
  - Example
    1155
- ip pim join-prune-interval
  1155
  - Syntax
    1155
  - Default Configuration
    1155
  - Command Mode
    1155
  - User Guidelines
    1155
  - Example
    1156
- ip pim rp-address
  1156
  - Syntax
    1156
  - Parameter Description
    1156
  - Default Configuration
    1156
  - Command Mode
    1156
  - User Guidelines
    1156
  - Example
    1157
- ip pim rp-candidate
  1157
  - Syntax
    1157
  - Parameter Description
    1157
  - Default Configuration
    1157
  - Command Mode
    1157
  - User Guidelines
    1158
  - Example
    1158
- ip pim sparse
  1158
  - Syntax
    1158
  - Default Configuration
    1158
  - Command Mode
    1158
  - User Guidelines
    1158
  - Example
    1158
- ip pim ssm
  1159
  - Syntax
    1159
  - Parameter Description
    1159
  - Default Configuration
    1159
  - Command Mode
    1159
  - User Guidelines
    1159
  - Example
    1159
- show ip multicast
  1159
  - Syntax
    1160
  - Syntax Description
    1160
  - Default Configuration
    1160
  - Command Mode
    1160
  - User Guidelines
    1160
  - Example
    1160
- show ip mcast boundary
  1160
  - Syntax
    1160
  - Default Configuration
    1161
  - Command Mode
    1161
  - User Guidelines
    1161
  - Example
    1161
- show ip multicast interface
  1161
  - Syntax
    1161
  - Syntax Description
    1161
  - Default Configuration
    1161
  - Command Mode
    1162
  - User Guidelines
    1162
  - Example
    1162
- show ip mcast mroute
  1162
  - Syntax
    1162
  - Default Configuration
    1162
  - Command Mode
    1162
  - User Guidelines
    1162
  - Example
    1162
- show ip mcast mroute group
  1163
  - Syntax
    1163
  - Default Configuration
    1163
  - Command Mode
    1163
  - User Guidelines
    1163
  - Example
    1163
- show ip mcast mroute source
  1164
  - Syntax
    1164
  - Default Configuration
    1164
  - Command Mode
    1164
  - User Guidelines
    1164
  - Example
    1164
- show ip mcast mroute static
  1164
  - Syntax
    1165
  - Default Configuration
    1165
  - Command Mode
    1165
  - User Guidelines
    1165
  - Example
    1165
- show ip pim
  1165
  - Syntax
    1165
  - Default Configuration
    1165
  - Command Mode
    1166
  - User Guidelines
    1166
  - Example
    1166
- show ip pim bsr-router
  1166
  - Syntax
    1166
  - Default Configuration
    1166
  - Command Mode
    1166
  - User Guidelines
    1167
  - Example
    1167
- show ip pim interface
  1167
  - Syntax
    1168
  - Field Descriptions
    1168
  - Default Configuration
    1168
  - Command Mode
    1168
  - User Guidelines
    1168
  - Example
    1168
- show ip pim neighbor
  1169
  - Syntax
    1169
  - Default Configuration
    1170
  - Command Mode
    1170
  - User Guidelines
    1170
  - Field Descriptions
    1170
  - Example
    1170
- show ip pim rp hash
  1171
  - Syntax
    1171
  - Default Configuration
    1171
  - Command Mode
    1171
  - User Guidelines
    1171
  - Example
    1171
- show ip pim rp mapping
  1172
  - Syntax
    1172
  - Default configuration
    1172
  - Command Mode
    1172
  - User Guidelines
    1172
  - Field Descriptions
    1172
  - Example
    1172
IPv6 Multicast Commands
1175
- ipv6 pim (Global config)
  1175
  - Syntax
    1175
  - Default Configuration
    1175
  - Command Mode
    1176
  - User Guidelines
    1176
  - Example
    1176
- ipv6 pim (VLAN Interface config)
  1176
  - Syntax
    1176
  - Default Configuration
    1176
  - Command Mode
    1176
  - User Guidelines
    1176
  - Example
    1176
- ipv6 pim bsr-border
  1177
  - Syntax
    1177
  - Default Configuration
    1177
  - Command Mode
    1177
  - User Guidelines
    1177
  - Example
    1177
- ipv6 pim bsr-candidate
  1177
  - Syntax
    1177
  - Default Configuration
    1178
  - Command Mode
    1178
  - User Guidelines
    1178
  - Example
    1178
- ipv6 pim dense
  1178
  - Syntax
    1178
  - Default Configuration
    1178
  - Command Mode
    1179
  - User Guidelines
    1179
  - Example
    1179
- ipv6 pim dr-priority
  1179
  - Syntax
    1179
  - Default Configuration
    1179
  - Command Mode
    1179
  - User Guidelines
    1179
  - Example
    1179
- ipv6 pim hello-interval
  1180
  - Syntax
    1180
  - Default Configuration
    1180
  - Command Mode
    1180
  - User Guidelines
    1180
  - Example
    1180
- ipv6 pim join-prune-interval
  1180
  - Syntax
    1180
  - Default Configuration
    1181
  - Command Mode
    1181
  - User Guidelines
    1181
  - Example
    1181
- ipv6 pim register-rate-limit
  1181
  - Syntax
    1181
  - Parameter Description
    1181
  - Default Configuration
    1181
  - Command Mode
    1181
  - User Guidelines
    1182
  - Example
    1182
- ipv6 pim register-threshold
  1182
  - Syntax
    1182
  - Default Configuration
    1182
  - Command Mode
    1182
  - User Guidelines
    1182
  - Example
    1182
- ipv6 pim rp-address
  1183
  - Syntax
    1183
  - Default Configuration
    1183
  - Command Mode
    1183
  - User Guidelines
    1183
  - Example
    1183
- ipv6 pim rp-candidate
  1183
  - Syntax
    1184
  - Default Configuration
    1184
  - Command Mode
    1184
  - User Guidelines
    1184
  - Example
    1184
- ipv6 pim sparse (Global config)
  1184
  - Syntax
    1184
  - Default Configuration
    1184
  - Command Mode
    1185
  - User Guidelines
    1185
  - Example
    1185
- ipv6 pim spt-threshold
  1185
  - Syntax
    1185
  - Default Configuration
    1185
  - Command Mode
    1185
  - User Guidelines
    1185
  - Example
    1185
- ipv6 pim ssm
  1186
  - Syntax
    1186
  - Default Configuration
    1186
  - Command Mode
    1186
  - User Guidelines
    1186
  - Example
    1186
- show ipv6 pim
  1186
  - Syntax
    1186
  - Default Configuration
    1186
  - Command Mode
    1187
  - User Guidelines
    1187
  - Example
    1187
- show ipv6 pim bsr
  1188
  - Syntax
    1188
  - Default Configuration
    1188
  - Command Mode
    1188
  - User Guidelines
    1188
  - Example
    1188
- show ipv6 pim bsr-router
  1188
  - Syntax
    1188
  - Default Configuration
    1189
  - Command Mode
    1189
  - User Guidelines
    1189
  - Example
    1189
- show ipv6 pim interface
  1190
  - Syntax
    1190
  - Default Configuration
    1190
  - Command Mode
    1190
  - User Guidelines
    1190
  - Example
    1190
- show ipv6 pim neighbor
  1190
  - Syntax
    1190
  - Default Configuration
    1191
  - Command Mode
    1191
  - User Guidelines
    1191
  - Example
    1191
- show ipv6 pim rphash
  1191
  - Syntax
    1191
  - Default Configuration
    1191
  - Command Mode
    1191
  - User Guidelines
    1191
  - Example
    1192
- show ipv6 pim rp mapping
  1192
  - Syntax
    1192
  - Default Configuration
    1192
  - Command Mode
    1192
  - User Guidelines
    1192
  - Example
    1192
OSPF Commands
1195
- Route Preferences
  1196
- OSPF Equal Cost Multipath (ECMP)
  1196
- Forwarding of OSPF Opaque LSAs Enabled by Default
  1197
- Passive Interfaces
  1197
- Graceful Restart
  1198
- Commands in this Chapter
  1198
- area default-cost (Router OSPF)
  1199
  - Syntax
    1199
  - Default Configuration
    1200
  - Command Mode
    1200
  - User Guidelines
    1200
  - Example
    1200
- area nssa (Router OSPF)
  1200
  - Syntax
    1200
  - Parameter Description
    1201
  - Default Configuration
    1201
  - Command Mode
    1201
  - User Guidelines
    1201
  - Example
    1201
- area nssa default-info-originate (Router OSPF Config)
  1202
  - Syntax
    1202
  - Default Configuration
    1202
  - Command Mode
    1202
  - User Guidelines
    1202
  - Example
    1203
- area nssa no-redistribute
  1203
  - Syntax
    1203
  - Default Configuration
    1203
  - Command Mode
    1203
  - User Guidelines
    1203
  - Example
    1203
- area nssa no-summary
  1204
  - Syntax
    1204
  - Default Configuration
    1204
  - Command Mode
    1204
  - User Guidelines
    1204
  - Example
    1204
- area nssa translator-role
  1204
  - Syntax
    1204
  - Default Configuration
    1205
  - Command Mode
    1205
  - User Guidelines
    1205
  - Example
    1205
- area nssa translator-stab-intv
  1205
  - Syntax
    1205
  - Default Configuration
    1205
  - Command Mode
    1206
  - User Guidelines
    1206
  - Example
    1206
- area range (Router OSPF)
  1206
  - Syntax
    1206
  - Parameter Description
    1206
  - Default Configuration
    1207
  - Command Mode
    1207
  - User Guidelines
    1207
  - Example
    1209
- area stub
  1210
  - Syntax
    1210
  - Default Configuration
    1210
  - Command Mode
    1210
  - User Guidelines
    1210
  - Examples
    1210
- area stub no-summary
  1211
  - Syntax
    1211
  - Default Configuration
    1211
  - Command Mode
    1211
  - User Guidelines
    1211
  - Example
    1211
- area virtual-link
  1211
  - Syntax
    1212
  - Parameter Description
    1212
  - Default Configuration
    1213
  - Command Mode
    1213
  - User Guidelines
    1213
  - Example
    1213
- area virtual-link authentication
  1214
  - Syntax
    1214
  - Default Configuration
    1214
  - Command Mode
    1214
  - User Guidelines
    1215
  - Example
    1215
- area virtual-link dead-interval
  1215
  - Syntax
    1215
  - Default Configuration
    1215
  - Command Mode
    1216
  - User Guidelines
    1216
  - Example
    1216
- area virtual-link hello-interval
  1216
  - Syntax
    1216
  - Default Configuration
    1216
  - Command Mode
    1216
  - User Guidelines
    1217
  - Example
    1217
- area virtual-link retransmit-interval
  1217
  - Syntax
    1217
  - Default Configuration
    1217
  - Command Mode
    1217
  - User Guidelines
    1217
  - Example
    1218
- area virtual-link transmit-delay
  1218
  - Syntax
    1218
  - Default Configuration
    1218
  - Command Mode
    1218
  - User Guidelines
    1218
  - Example
    1218
- auto-cost
  1219
  - Syntax
    1219
  - Default Configuration
    1219
  - Command Mode
    1219
  - User Guidelines
    1219
  - Example
    1219
- bandwidth
  1220
  - Syntax
    1220
  - Default Configuration
    1220
  - Command Mode
    1220
  - User Guidelines
    1220
  - Example
    1220
- capability opaque
  1220
  - Syntax
    1220
  - Default Configuration
    1221
  - Command Mode
    1221
  - User Guidelines
    1221
  - Example
    1221
- clear ip ospf
  1221
  - Syntax
    1221
  - Default Configuration
    1222
  - Command Mode
    1222
  - User Guidelines
    1222
  - Example
    1222
- clear ip ospf stub-router
  1222
  - Syntax
    1222
  - Default Configuration
    1222
  - Command Mode
    1222
  - User Guidelines
    1223
- compatible rfc1583
  1223
  - Syntax
    1223
  - Syntax Description
    1223
  - Default Configuration
    1223
  - Command Mode
    1223
  - User Guidelines
    1223
  - Example
    1223
- default-information originate (Router OSPF Configuration)
  1224
  - Syntax
    1224
  - Syntax Description
    1224
  - Default Configuration
    1224
  - Command Mode
    1224
  - User Guidelines
    1224
  - Example
    1225
- default-metric
  1225
  - Syntax
    1225
  - Default Configuration
    1225
  - Command Mode
    1225
  - User Guidelines
    1225
  - Example
    1225
- distance ospf
  1226
  - Syntax
    1226
  - Syntax Description
    1226
  - Default Configuration
    1226
  - Command Mode
    1226
  - User Guidelines
    1226
  - Examples
    1227
- distribute-list out
  1227
  - Syntax
    1227
  - Syntax Description
    1227
  - Default Configuration
    1227
  - Command Mode
    1227
  - User Guidelines
    1228
  - Example
    1228
- enable
  1228
  - Syntax
    1228
  - Default Configuration
    1228
  - Command Mode
    1228
  - User Guidelines
    1228
  - Example
    1228
- exit-overflow-interval
  1229
  - Syntax
    1229
  - Default Configuration
    1229
  - Command Mode
    1229
  - User Guidelines
    1229
  - Example
    1229
- external-lsdb-limit
  1229
  - Syntax
    1230
  - Default Configuration
    1230
  - Command Mode
    1230
  - User Guidelines
    1230
  - Example
    1230
- ip ospf area
  1230
  - Syntax
    1230
  - Default Configuration
    1231
  - Command Mode
    1231
  - User Guidelines
    1231
  - Example
    1231
- ip ospf authentication
  1231
  - Syntax
    1231
  - Default Configuration
    1232
  - Command Mode
    1232
  - User Guidelines
    1232
  - Example
    1232
- ip ospf cost
  1232
  - Syntax
    1232
  - Default Configuration
    1232
  - Command Mode
    1232
  - User Guidelines
    1233
  - Example
    1233
- ip ospf database-filter all out
  1233
  - Syntax
    1233
  - Default Configuration
    1233
  - Command Mode
    1233
  - User Guidelines
    1233
- ip ospf dead-interval
  1233
  - Syntax
    1233
  - Default Configuration
    1234
  - Command Mode
    1234
  - User Guidelines
    1234
  - Example
    1234
- ip ospf hello-interval
  1234
  - Syntax
    1234
  - Default Configuration
    1234
  - Command Mode
    1235
  - User Guidelines
    1235
  - Example
    1235
- ip ospf mtu-ignore
  1235
  - Syntax
    1235
  - Default Configuration
    1235
  - Command Mode
    1235
  - User Guidelines
    1235
  - Example
    1236
- ip ospf network
  1236
  - Syntax
    1236
  - Default Configuration
    1236
  - Command Mode
    1236
  - Usage Guidelines
    1236
  - Example
    1236
- ip ospf priority
  1237
  - Syntax
    1237
  - Default Configuration
    1237
  - Command Mode
    1237
  - User Guidelines
    1237
  - Example
    1237
- ip ospf retransmit-interval
  1237
  - Syntax
    1238
  - Default Configuration
    1238
  - Command Mode
    1238
  - User Guidelines
    1238
  - Example
    1238
- ip ospf transmit-delay
  1238
  - Syntax
    1238
  - Default Configuration
    1239
  - Command Mode
    1239
  - User Guidelines
    1239
  - Example
    1239
- log adjacency-changes
  1239
  - Syntax
    1239
  - Parameter Description
    1239
  - Default Configuration
    1239
  - Command Mode
    1240
  - User Guidelines
    1240
- max-metric router-lsa
  1240
  - Syntax
    1240
  - Parameter Description
    1240
  - Default Configuration
    1240
  - Command Mode
    1240
  - User Guidelines
    1241
- maximum-paths
  1241
  - Syntax
    1242
  - Default Configuration
    1242
  - Command Mode
    1242
  - User Guidelines
    1242
  - Example
    1242
- network area
  1242
  - Syntax
    1243
  - Default Configuration
    1243
  - Command Mode
    1243
  - User Guidelines
    1243
  - Example
    1243
- nsf
  1243
  - Syntax
    1244
  - Default Configuration
    1244
  - Command Mode
    1244
  - User Guidelines
    1244
- nsf helper
  1245
  - Syntax
    1245
  - Default Configuration
    1245
  - Command Mode
    1245
  - User Guidelines
    1245
- nsf helper strict-lsa-checking
  1245
  - Syntax
    1245
  - Default Configuration
    1246
  - Command Mode
    1246
  - User Guidelines
    1246
- nsf restart-interval
  1246
  - Syntax
    1246
  - Default Configuration
    1247
  - Command Mode
    1247
  - User Guidelines
    1247
  - Example
    1247
- passive-interface default
  1247
  - Syntax
    1247
  - Default Configuration
    1247
  - Command Mode
    1247
  - User Guidelines
    1248
  - Example
    1248
- passive-interface
  1248
  - Syntax
    1248
  - Default Configuration
    1248
  - Command Mode
    1248
  - User Guidelines
    1248
  - Example
    1248
- redistribute
  1249
  - Syntax
    1249
  - Parameter Description
    1249
  - Default Configuration
    1249
  - Command Mode
    1250
  - User Guidelines
    1250
  - Example
    1250
- router-id
  1250
  - Syntax
    1250
  - Default Configuration
    1250
  - Command Mode
    1250
  - User Guidelines
    1250
  - Example
    1250
- router ospf
  1251
  - Syntax
    1251
  - Default Configuration
    1251
  - Command Mode
    1251
  - User Guidelines
    1251
  - Example
    1251
- show ip ospf
  1251
  - Syntax
    1251
  - Syntax Description
    1251
  - Default Configuration
    1251
  - Command Mode
    1252
  - User Guidelines
    1252
  - Example #1
    1255
  - Example #2
    1257
- show ip ospf abr
  1258
  - Syntax
    1259
  - Default Configuration
    1259
  - Command Mode
    1259
  - User Guidelines
    1259
  - Example
    1259
- show ip ospf area
  1259
  - Syntax
    1259
  - Default Configuration
    1259
  - Command Mode
    1260
  - User Guidelines
    1260
  - Example #1
    1260
  - Example #2
    1260
  - Example #3
    1261
- show ip ospf asbr
  1261
  - Syntax
    1261
  - Default Configuration
    1261
  - Command Mode
    1262
  - User Guidelines
    1262
  - Example
    1262
- show ip ospf database
  1262
  - Syntax
    1262
  - Default Configuration
    1263
  - Command Mode
    1263
  - User Guidelines
    1263
  - Example
    1263
- show ip ospf database database-summary
  1265
  - Syntax
    1265
  - Default Configuration
    1265
  - Command Mode
    1265
  - User Guidelines
    1266
  - Example
    1266
- show ip ospf interface
  1268
  - Syntax
    1268
  - Syntax Description
    1268
  - Default Configuration
    1268
  - Command Mode
    1268
  - User Guidelines
    1268
  - Example #1
    1268
  - Example #2
    1269
- show ip ospf interface brief
  1270
  - Syntax
    1270
  - Default Configuration
    1270
  - Command Mode
    1270
  - User Guidelines
    1270
  - Example
    1270
- show ip ospf interface stats
  1271
  - Syntax
    1271
  - Default Configuration
    1271
  - Command Mode
    1271
  - User Guidelines
    1271
  - Example
    1271
- show ip ospf neighbor
  1272
  - Syntax
    1272
  - Syntax Description
    1272
  - Default Configuration
    1272
  - Command Mode
    1272
  - User Guidelines
    1272
  - Example
    1272
  - Field Description
    1273
- show ip ospf range
  1275
  - Syntax
    1276
  - Field Descriptions
    1276
  - Default Configuration
    1276
  - Command Mode
    1276
  - User Guidelines
    1276
  - Example
    1276
- show ip ospf statistics
  1277
  - Syntax
    1277
  - Syntax Description
    1277
  - Default Configuration
    1277
  - Command Mode
    1277
  - User Guidelines
    1277
  - Field Descriptions
    1277
  - Example
    1278
- show ip ospf stub table
  1278
  - Syntax
    1279
  - Default Configuration
    1279
  - Command Mode
    1279
  - User Guidelines
    1279
  - Example
    1279
- show ip ospf traffic
  1279
  - Syntax
    1279
  - Parameter Description
    1280
  - Default Configuration
    1280
  - Command Mode
    1280
  - User Guidelines
    1280
  - Example
    1280
- show ip ospf virtual-link
  1282
  - Syntax
    1282
  - Default Configuration
    1282
  - Command Mode
    1282
  - User Guidelines
    1282
  - Example
    1282
- show ip ospf virtual-links brief
  1283
  - Use the show ip ospf virtual-link brief command in Privileged EXEC mode to display the OSPF Virtual Interface information for all areas in the system in table format.Syntax
    1283
  - Syntax Description
    1283
  - Default Configuration
    1283
  - Command Mode
    1283
  - User Guidelines
    1283
  - Example
    1283
- timers pacing flood
  1284
  - Syntax
    1284
  - Parameter Description
    1284
  - Default Configuration
    1284
  - Command Mode
    1284
  - User Guidelines
    1284
- timers pacing lsa-group
  1284
  - Syntax
    1285
  - Parameter Description
    1285
  - Default Configuration
    1285
  - Command Mode
    1285
  - User Guidelines
    1285
- timers spf
  1285
  - Syntax
    1285
  - Default Configuration
    1286
  - Command Mode
    1286
  - User Guidelines
    1286
  - Example
    1286
OSPFv3 Commands
1287
- area default-cost (Router OSPFv3)
  1288
  - Syntax
    1288
  - Default Configuration
    1288
  - Command Mode
    1288
  - User Guidelines
    1288
  - Example
    1288
- area nssa (Router OSPFv3)
  1289
  - Syntax
    1289
  - Parameter Description
    1289
  - Default Configuration
    1290
  - Command Mode
    1290
  - User Guidelines
    1290
  - Example
    1290
- area nssa default-info-originate (Router OSPFv3 Config)
  1290
  - Syntax
    1290
  - Default Configuration
    1291
  - Command Mode
    1291
  - User Guidelines
    1291
  - Example
    1291
- area nssa no-redistribute
  1291
  - Syntax
    1291
  - Default Configuration
    1291
  - Command Mode
    1292
  - User Guidelines
    1292
  - Example
    1292
- area nssa no-summary
  1292
  - Syntax
    1292
  - Default Configuration
    1292
  - Command Mode
    1292
  - User Guidelines
    1292
  - Example
    1293
- area nssa translator-role
  1293
  - Syntax
    1293
  - Default Configuration
    1293
  - Command Mode
    1293
  - User Guidelines
    1293
  - Example
    1293
- area nssa translator-stab-intv
  1294
  - Syntax
    1294
  - Default Configuration
    1294
  - Command Mode
    1294
  - User Guidelines
    1294
  - Example
    1294
- area range (Router OSPFv3)
  1295
  - Syntax
    1295
  - Parameter Description
    1295
  - Default Configuration
    1295
  - Command Mode
    1295
  - User Guidelines
    1296
  - Example
    1296
- area stub
  1296
  - Syntax
    1296
  - Parameter Description
    1296
  - Default Configuration
    1296
  - Command Mode
    1297
  - User Guidelines
    1297
  - Example
    1297
- area stub no-summary
  1297
  - Syntax
    1297
  - Default Configuration
    1297
  - Command Mode
    1297
  - User Guidelines
    1297
  - Example
    1298
- area virtual-link
  1298
  - Syntax
    1298
  - Default Configuration
    1299
  - Command Mode
    1299
  - User Guidelines
    1299
  - Example
    1299
- area virtual-link dead-interval
  1300
  - Syntax
    1300
  - Default Configuration
    1300
  - Command Mode
    1300
  - User Guidelines
    1300
  - Example
    1300
- area virtual-link hello-interval
  1300
  - Syntax
    1301
  - Default Configuration
    1301
  - Command Mode
    1301
  - User Guidelines
    1301
  - Example
    1301
- area virtual-link retransmit-interval
  1301
  - Syntax
    1301
  - Default Configuration
    1302
  - Command Mode
    1302
  - User Guidelines
    1302
  - Example
    1302
- area virtual-link transmit-delay
  1302
  - Syntax
    1302
  - Default Configuration
    1302
  - Command Mode
    1303
  - User Guidelines
    1303
  - Example
    1303
- default-information originate (Router OSPFv3 Configuration)
  1303
  - Syntax
    1303
  - Syntax Description
    1303
  - Default Configuration
    1304
  - Command Mode
    1304
  - User Guidelines
    1304
  - Example
    1304
- default-metric
  1304
  - Syntax
    1304
  - Default Configuration
    1304
  - Command Mode
    1304
  - User Guidelines
    1304
  - Example
    1305
- distance ospf
  1305
  - Syntax
    1305
  - Default Configuration
    1305
  - Command Mode
    1305
  - User Guidelines
    1305
  - Example
    1305
- enable
  1306
  - Syntax
    1306
  - Default Configuration
    1306
  - Command Mode
    1306
  - User Guidelines
    1306
  - Example
    1306
- exit-overflow-interval
  1306
  - Syntax
    1307
  - Default Configuration
    1307
  - Command Mode
    1307
  - User Guidelines
    1307
  - Example
    1307
- external-lsdb-limit
  1307
  - Syntax
    1307
  - Default Configuration
    1308
  - Command Mode
    1308
  - User Guidelines
    1308
  - Example
    1308
- ipv6 ospf
  1308
  - Syntax
    1308
  - Default Configuration
    1308
  - Command Mode
    1308
  - User Guidelines
    1308
  - Example
    1309
- ipv6 ospf area
  1309
  - Syntax
    1309
  - Default Configuration
    1309
  - Command Mode
    1309
  - User Guidelines
    1309
  - Example
    1309
- ipv6 ospf cost
  1310
  - Syntax
    1310
  - Default Configuration
    1310
  - Command Mode
    1310
  - User Guidelines
    1310
  - Example
    1310
- ipv6 ospf dead-interval
  1310
  - Syntax
    1310
  - Default Configuration
    1311
  - Command Mode
    1311
  - User Guidelines
    1311
  - Example
    1311
- ipv6 ospf hello-interval
  1311
  - Syntax
    1311
  - Default Configuration
    1311
  - Command Mode
    1312
  - User Guidelines
    1312
  - Example
    1312
- ipv6 ospf mtu-ignore
  1312
  - Syntax
    1312
  - Default Configuration
    1312
  - Command Mode
    1312
  - User Guidelines
    1312
  - Example
    1313
- ipv6 ospf network
  1313
  - Syntax
    1313
  - Default Configuration
    1313
  - Command Mode
    1313
  - User Guidelines
    1313
  - Example
    1314
- ipv6 ospf priority
  1314
  - Syntax
    1314
  - Default Configuration
    1314
  - Command Mode
    1314
  - User Guidelines
    1314
  - Example
    1314
- ipv6 ospf retransmit-interval
  1315
  - Syntax
    1315
  - Default Configuration
    1315
  - Command Mode
    1315
  - User Guidelines
    1315
  - Example
    1315
- ipv6 ospf transmit-delay
  1315
  - Syntax
    1315
  - Default Configuration
    1316
  - Command Mode
    1316
  - User Guidelines
    1316
  - Example
    1316
- ipv6 router ospf
  1316
  - Syntax
    1316
  - Default Configuration
    1316
  - Command Mode
    1316
  - User Guidelines
    1316
  - Example
    1317
- maximum-paths
  1317
  - Syntax
    1317
  - Default Configuration
    1317
  - Command Mode
    1317
  - User Guidelines
    1317
  - Example
    1317
- nsf
  1317
  - Syntax
    1318
  - Default Configuration
    1318
  - Command Mode
    1318
  - User Guidelines
    1318
- nsf helper
  1318
  - Syntax
    1319
  - Default Configuration
    1319
  - Command Mode
    1319
  - User Guidelines
    1319
- nsf helper strict-lsa-checking
  1319
  - Syntax
    1319
  - Default Configuration
    1320
  - Command Mode
    1320
  - User Guidelines
    1320
- nsf restart-interval
  1320
  - Syntax
    1320
  - Default Configuration
    1320
  - Command Mode
    1321
  - User Guidelines
    1321
- passive-interface
  1321
  - Syntax
    1321
  - Default Configuration
    1321
  - Command Mode
    1321
  - User Guidelines
    1321
  - Example
    1321
- passive-interface default
  1322
  - Syntax
    1322
  - Default Configuration
    1322
  - Command Mode
    1322
  - User Guidelines
    1322
  - Example
    1322
- redistribute
  1322
  - Syntax
    1322
  - Default Configuration
    1323
  - Command Mode
    1323
  - User Guidelines
    1323
  - Example
    1323
- router-id
  1323
  - Syntax
    1323
  - Default Configuration
    1323
  - Command Mode
    1323
  - User Guidelines
    1323
  - Example
    1324
- show ipv6 ospf
  1324
  - Syntax
    1324
  - Default Configuration
    1324
  - Command Mode
    1324
  - User Guidelines
    1324
  - Example
    1327
- show ipv6 ospf abr
  1328
  - Syntax
    1328
  - Default Configuration
    1328
  - Command Mode
    1328
  - User Guidelines
    1328
  - Example
    1328
- show ipv6 ospf area
  1329
  - Syntax
    1329
  - Default Configuration
    1329
  - Command Mode
    1329
  - User Guidelines
    1329
  - Example
    1329
- show ipv6 ospf asbr
  1330
  - Syntax
    1330
  - Default Configuration
    1330
  - Command Mode
    1330
  - User Guidelines
    1330
  - Example
    1330
- show ipv6 ospf border-routers
  1330
  - Syntax
    1330
  - Default Configuration
    1331
  - Command Mode
    1331
- show ipv6 ospf database
  1331
  - Syntax
    1331
  - Default Configuration
    1332
  - Command Mode
    1332
  - User Guidelines
    1332
  - Example
    1332
- show ipv6 ospf database database-summary
  1334
  - Syntax
    1334
  - Syntax Description
    1334
  - Default Configuration
    1334
  - Command Mode
    1334
  - User Guidelines
    1334
  - Example
    1334
- show ipv6 ospf interface
  1335
  - Syntax
    1335
  - Syntax Description
    1335
  - Default Configuration
    1336
  - Command Mode
    1336
  - User Guidelines
    1336
  - Example
    1336
- show ipv6 ospf interface brief
  1337
  - Syntax
    1337
  - Default Configuration
    1337
  - Command Mode
    1337
  - User Guidelines
    1337
  - Example
    1337
- show ipv6 ospf interface stats
  1337
  - Syntax
    1337
  - Default Configuration
    1338
  - Command Mode
    1338
  - User Guidelines
    1338
  - Example
    1338
- show ipv6 ospf interface vlan
  1339
  - Syntax
    1339
  - Default Configuration
    1339
  - Command Mode
    1339
  - User Guidelines
    1339
  - Example
    1339
- show ipv6 ospf neighbor
  1340
  - Syntax
    1340
  - Syntax Description
    1341
  - Default Configuration
    1341
  - Command Mode
    1341
  - User Guidelines
    1341
  - Examples
    1341
- show ipv6 ospf range
  1342
  - Syntax
    1342
  - Default Configuration
    1342
  - Command Mode
    1342
  - User Guidelines
    1342
  - Example
    1342
- show ipv6 ospf stub table
  1343
  - Syntax
    1343
  - Default Configuration
    1343
  - Command Mode
    1343
  - User Guidelines
    1343
  - Example
    1343
- show ipv6 ospf virtual-links
  1343
  - Use the show ipv6 ospf virtual-links command in Privileged EXEC mode to display the OSPF Virtual Interface information for a specific area and neighbor or for all areas in the system. Syntax
    1343
  - Default Configuration
    1344
  - Command Mode
    1344
  - User Guidelines
    1344
  - Example
    1344
- show ipv6 ospf virtual-link brief
  1344
  - Syntax
    1344
  - Default Configuration
    1345
  - Command Mode
    1345
  - User Guidelines
    1345
  - Example
    1345
Router Discovery Protocol Commands
1347
- Commands in this Chapter
  1347
- ip irdp
  1347
  - Syntax
    1347
  - Syntax Description
    1348
  - Default Configuration
    1348
  - Command Mode
    1348
  - User Guidelines
    1349
  - Example
    1349
- ip irdp address
  1349
  - Syntax
    1349
  - Default Configuration
    1349
  - Command Mode
    1349
  - User Guidelines
    1349
  - Example
    1350
- ip irdp holdtime
  1350
  - Syntax
    1350
  - Default Configuration
    1350
  - Command Mode
    1350
  - User Guidelines
    1350
  - Example
    1350
- ip irdp maxadvertinterval
  1351
  - Syntax
    1351
  - Default Configuration
    1351
  - Command Mode
    1351
  - User Guidelines
    1351
  - Example
    1352
- ip irdp minadvertinterval
  1352
  - Syntax
    1352
  - Default Configuration
    1352
  - Command Mode
    1352
  - User Guidelines
    1352
  - Example
    1352
- ip irdp multicast
  1353
  - Syntax
    1353
  - Default Configuration
    1353
  - Command Mode
    1353
  - User Guidelines
    1353
  - Example
    1353
- ip irdp preference
  1353
  - Syntax
    1354
  - Default Configuration
    1354
  - Command Mode
    1354
  - User Guidelines
    1354
  - Example
    1354
- show ip irdp
  1354
  - Syntax
    1354
  - Default Configuration
    1354
  - Command Mode
    1355
  - User Guidelines
    1355
  - Example
    1355
Routing Information Protocol Commands
1357
- Commands in this Chapter
  1357
- auto-summary
  1357
  - Syntax
    1358
  - Default Configuration
    1358
  - Command Mode
    1358
  - User Guidelines
    1358
  - Example
    1358
- default-information originate (Router RIP Configuration)
  1358
  - Syntax
    1358
  - Default Configuration
    1358
  - Command Mode
    1358
  - User Guidelines
    1359
  - Example
    1359
- default-metric
  1359
  - Syntax
    1359
  - Default Configuration
    1359
  - Command Mode
    1359
  - User Guidelines
    1359
  - Example
    1359
- distance rip
  1360
  - Syntax
    1360
  - Default Configuration
    1360
  - Command Mode
    1360
  - User Guidelines
    1360
  - Example
    1360
- distribute-list out
  1360
  - Syntax
    1360
  - Default Configuration
    1361
  - Command Mode
    1361
  - User Guidelines
    1361
  - Example
    1361
- enable
  1361
  - Syntax
    1361
  - Default Configuration
    1362
  - Command Mode
    1362
  - User Guidelines
    1362
  - Example
    1362
- hostroutesaccept
  1362
  - Syntax
    1362
  - Default Configuration
    1362
  - Command Mode
    1362
  - User Guidelines
    1362
  - Example
    1362
- ip rip
  1363
  - Syntax
    1363
  - Default Configuration
    1363
  - Command Mode
    1363
  - User Guidelines
    1363
  - Example
    1363
- ip rip authentication
  1363
  - Syntax
    1363
  - Default Configuration
    1364
  - Command Mode
    1364
  - User Guidelines
    1364
  - Example
    1364
- ip rip receive version
  1364
  - Syntax
    1364
  - Default Configuration
    1365
  - Command Mode
    1365
  - User Guidelines
    1365
  - Example
    1365
- ip rip send version
  1365
  - Syntax
    1365
  - Default Configuration
    1365
  - Command Mode
    1366
  - User Guidelines
    1366
  - Example
    1366
- redistribute
  1366
  - Syntax
    1366
  - Default Configuration
    1367
  - Command Mode
    1367
  - User Guidelines
    1367
  - Example
    1367
- router rip
  1367
  - Syntax
    1367
  - Default Configuration
    1367
  - Command Mode
    1367
  - User Guidelines
    1367
  - Example
    1367
- show ip rip
  1368
  - Syntax
    1368
  - Default Configuration
    1368
  - Command Mode
    1368
  - User Guidelines
    1368
  - Example
    1368
- show ip rip interface
  1369
  - Syntax
    1369
  - Default Configuration
    1369
  - Command Mode
    1369
  - User Guidelines
    1369
  - Example
    1369
- show ip rip interface brief
  1370
  - Syntax
    1370
  - Default Configuration
    1370
  - Command Mode
    1370
  - User Guidelines
    1370
  - Example
    1371
- split-horizon
  1371
  - Syntax
    1371
  - Default Configuration
    1371
  - Command Mode
    1371
  - User Guidelines
    1371
  - Example
    1371
Tunnel Interface Commands
1373
- Commands in this Chapter
  1373
- interface tunnel
  1374
  - Syntax
    1374
  - Default Configuration
    1374
  - Command Mode
    1374
  - User Guidelines
    1374
  - Example
    1374
- show interfaces tunnel
  1374
  - Syntax
    1374
  - Default Configuration
    1375
  - Command Mode
    1375
  - User Guidelines
    1375
  - Examples
    1375
- tunnel destination
  1375
  - Syntax
    1375
  - Default Configuration
    1375
  - Command Mode
    1376
  - User Guidelines
    1376
  - Example
    1376
- tunnel mode ipv6ip
  1376
  - Syntax
    1376
  - Default Configuration
    1376
  - Command Mode
    1376
  - User Guidelines
    1376
  - Example
    1376
- tunnel source
  1377
  - Syntax
    1377
  - Syntax Description
    1377
  - Default Configuration
    1377
  - Command Mode
    1377
  - User Guidelines
    1377
  - Example
    1377
Virtual Router Redundancy Protocol Commands
1379
- Pingable VRRP Interface
  1379
- VRRP Route/Interface Tracking
  1380
- Interface Tracking
  1381
- Route Tracking
  1381
- Commands in this Chapter
  1381
- ip vrrp
  1382
  - Syntax
    1382
  - Default Configuration
    1382
  - Command Mode
    1382
  - User Guidelines
    1382
  - Example
    1382
- vrrp accept-mode
  1382
  - Syntax
    1382
  - Default Configuration
    1383
  - Command Mode
    1383
  - User Guidelines
    1383
- vrrp authentication
  1383
  - Syntax
    1383
  - Syntax Description
    1383
  - Default Configuration
    1383
  - Command Mode
    1384
  - User Guidelines
    1384
  - Example
    1384
- vrrp description
  1384
  - Syntax
    1384
  - Syntax Description
    1384
  - Default Configuration
    1384
  - Command Mode
    1384
  - User Guidelines
    1385
  - Example
    1385
- vrrp ip
  1385
  - Syntax
    1385
  - Syntax Description
    1385
  - Default Configuration
    1385
  - Command Mode
    1385
  - User Guidelines
    1386
  - Example
    1386
- vrrp mode
  1386
  - Syntax
    1387
  - Default Configuration
    1387
  - Command Mode
    1387
  - User Guidelines
    1387
  - Example
    1387
- vrrp preempt
  1387
  - Syntax
    1387
  - Syntax Description
    1387
  - Default Configuration
    1388
  - Command Mode
    1388
  - User Guidelines
    1388
  - Example
    1388
- vrrp priority
  1388
  - Syntax
    1388
  - Default Configuration
    1389
  - Command Mode
    1389
  - User Guidelines
    1389
  - Example
    1389
- vrrp timers advertise
  1389
  - Syntax
    1389
  - Default Configuration
    1390
  - Command Mode
    1390
  - User Guidelines
    1390
  - Example
    1390
- vrrp timers learn
  1390
  - Syntax
    1390
  - Default Configuration
    1390
  - Command Mode
    1390
  - User Guidelines
    1391
  - Example
    1391
- vrrp track interface
  1391
  - Syntax
    1391
  - Syntax Description
    1392
  - Default Configuration
    1392
  - Command Mode
    1392
  - User Guidelines
    1392
  - Example
    1392
- vrrp track ip route
  1392
  - Syntax
    1393
  - Parameter Description
    1393
  - Default Configuration
    1393
  - Command Mode
    1393
  - User Guidelines
    1393
  - Example
    1393
- show vrrp
  1394
  - Syntax
    1394
  - Syntax Description
    1394
  - Default Configuration
    1394
  - Command Mode
    1394
  - User Guidelines
    1394
  - Example
    1394
- show vrrp interface
  1396
  - Syntax
    1396
  - Syntax Description
    1396
  - Default Configuration
    1397
  - Command Mode
    1397
  - User Guidelines
    1397
  - Example
    1397
- show vrrp interface brief
  1398
  - Syntax
    1398
  - Default Configuration
    1399
  - Command Mode
    1399
  - User Guidelines
    1399
  - Example
    1399
- show vrrp interface stats
  1399
  - Syntax
    1399
  - Default Configuration
    1399
  - Command Mode
    1399
  - User Guidelines
    1400
  - Example
    1400
- ip vrrp accept-mode
  1400
  - Syntax
    1401
  - Default Configuration
    1401
  - Command Mode
    1401
  - User Guidelines
    1401
- show ip vrrp interface
  1401
  - Syntax
    1401
  - Syntax Description
    1401
  - Default Configuration
    1401
  - Command Mode
    1401
  - User Guidelines
    1402
  - Example
    1402
Utility Commands
1403
Auto-Install Commands
1405
- Commands in this Chapter
  1406
- boot auto-copy-sw
  1406
  - Syntax
    1406
  - Parameter Description
    1406
  - Default Configuration
    1406
  - Command Mode
    1407
  - User Guidelines
    1407
- boot auto-copy-sw allow-downgrade
  1407
  - Syntax
    1407
  - Parameter Description
    1407
  - Default Configuration
    1407
  - Command Mode
    1407
  - User Guidelines
    1407
- boot host autoreboot
  1408
  - Syntax
    1408
  - Parameter Description
    1408
  - Default Configuration
    1408
  - Command Mode
    1408
  - User Guidelines
    1408
  - Example
    1408
- boot host autosave
  1409
  - Syntax
    1409
  - Parameter Description
    1409
  - Default Configuration
    1409
  - Command Mode
    1409
  - User Guidelines
    1409
  - Example
    1409
- boot host dhcp
  1409
  - Syntax
    1410
  - Parameter Description
    1410
  - Default Configuration
    1410
  - Command Mode
    1410
  - User Guidelines
    1410
  - Example
    1410
- boot host retrycount
  1410
  - Syntax
    1411
  - Default Configuration
    1411
  - Command Mode
    1411
  - User Guidelines
    1411
  - Example
    1411
- show auto-copy-sw
  1411
  - Syntax
    1411
  - Parameter Description
    1411
  - Default Configuration
    1412
  - Command Mode
    1412
  - User Guidelines
    1412
  - Example
    1412
- show boot
  1412
  - Syntax
    1412
  - Parameter Description
    1412
  - Default Configuration
    1412
  - Command Mode
    1413
  - User Guidelines
    1413
  - Example
    1413
Captive Portal Commands
1415
- Commands in this Chapter
  1415
- authentication timeout
  1417
  - Syntax
    1417
  - Default Configuration
    1417
  - Command Mode
    1417
  - User Guidelines
    1417
  - Example
    1417
- captive-portal
  1417
  - Syntax
    1418
  - Default Configuration
    1418
  - Command Mode
    1418
  - User Guidelines
    1418
  - Example
    1418
- enable
  1418
  - Syntax
    1418
  - Default Configuration
    1418
  - Command Mode
    1418
  - User Guidelines
    1418
  - Example
    1419
- http port
  1419
  - Syntax
    1419
  - Default Configuration
    1419
  - Command Mode
    1419
  - User Guidelines
    1419
  - Example
    1419
- https port
  1419
  - Syntax
    1419
  - Default Configuration
    1420
  - Command Mode
    1420
  - User Guidelines
    1420
  - Example
    1420
- show captive-portal
  1420
  - Syntax
    1420
  - Default Configuration
    1420
  - Command Mode
    1420
  - User Guidelines
    1420
  - Example
    1421
- show captive-portal status
  1421
  - Syntax
    1421
  - Default Configuration
    1421
  - Command Mode
    1421
  - User Guidelines
    1421
  - Example
    1421
- block
  1422
  - Syntax
    1422
  - Default Configuration
    1422
  - Command Mode
    1422
  - User Guidelines
    1422
  - Example
    1422
- configuration
  1423
  - Syntax
    1423
  - Default Configuration
    1423
  - Command Mode
    1423
  - User Guidelines
    1423
  - Example
    1423
- enable
  1423
  - Syntax
    1423
  - Default Configuration
    1424
  - Command Mode
    1424
  - User Guidelines
    1424
  - Example
    1424
- group
  1424
  - Syntax
    1424
  - Default Configuration
    1424
  - Command Mode
    1424
  - User Guidelines
    1424
  - Example
    1425
- interface
  1425
  - Syntax
    1425
  - Default Configuration
    1425
  - Command Mode
    1425
  - User Guidelines
    1425
  - Example
    1425
- locale
  1425
  - Syntax
    1425
  - Default Configuration
    1426
  - Command Mode
    1426
  - User Guidelines
    1426
- name (Captive Portal)
  1426
  - Syntax
    1426
  - Default Configuration
    1426
  - Command Mode
    1426
  - User Guidelines
    1426
  - Example
    1426
- protocol
  1427
  - Syntax
    1427
  - Default Configuration
    1427
  - Command Mode
    1427
  - User Guidelines
    1427
  - Example
    1427
- redirect
  1427
  - Syntax
    1427
  - Default Configuration
    1427
  - Command Mode
    1427
  - User Guidelines
    1428
  - Example
    1428
- redirect-url
  1428
  - Syntax
    1428
  - Default Configuration
    1428
  - Command Mode
    1428
  - User Guidelines
    1428
  - Example
    1428
- session-timeout
  1428
  - Syntax
    1428
  - Default Configuration
    1429
  - Command Mode
    1429
  - User Guidelines
    1429
  - Example
    1429
- verification
  1429
  - Syntax
    1429
  - Default Configuration
    1429
  - Command Mode
    1429
  - User Guidelines
    1430
  - Example
    1430
- captive-portal client deauthenticate
  1430
  - Syntax
    1430
  - Default Configuration
    1430
  - Command Mode
    1430
  - User Guidelines
    1430
  - Example
    1430
- show captive-portal client status
  1430
  - Syntax
    1431
  - Default Configuration
    1431
  - Command Mode
    1431
  - User Guidelines
    1431
  - Example
    1431
- show captive-portal configuration client status
  1431
  - Syntax
    1432
  - Default Configuration
    1432
  - Command Mode
    1432
  - User Guidelines
    1432
  - Example
    1432
- show captive-portal interface client status
  1432
  - Syntax
    1433
  - Default Configuration
    1433
  - Command Mode
    1433
  - User Guidelines
    1433
  - Example
    1433
- show captive-portal interface configuration status
  1434
  - Syntax
    1434
  - Default Configuration
    1434
  - Command Mode
    1434
  - User Guidelines
    1434
  - Example
    1434
- clear captive-portal users
  1435
  - Syntax
    1435
  - Default Configuration
    1435
  - Command Mode
    1435
  - User Guidelines
    1435
  - Example
    1435
- no user
  1435
  - Syntax
    1435
  - Default Configuration
    1435
  - Command Mode
    1436
  - User Guidelines
    1436
  - Example
    1436
- show captive-portal user
  1436
  - Syntax
    1436
  - Default Configuration
    1436
  - Command Mode
    1436
  - User Guidelines
    1436
  - Example
    1436
- user group
  1437
  - Syntax
    1437
  - Default Configuration
    1437
  - Command Mode
    1437
  - User Guidelines
    1437
  - Example
    1438
- user-logout
  1438
  - Syntax
    1438
  - Parameter Description
    1438
  - Default Configuration
    1438
  - Command Mode
    1438
  - User Guidelines
    1438
  - Example
    1438
- user name
  1439
  - Syntax
    1439
  - Default Configuration
    1439
  - Command Mode
    1439
  - User Guidelines
    1439
  - Example
    1439
- user password
  1439
  - Syntax
    1439
  - Default Configuration
    1440
  - Command Mode
    1440
  - User Guidelines
    1440
  - Example
    1440
- user session-timeout
  1440
  - Syntax
    1440
  - Default Configuration
    1440
  - Command Mode
    1440
  - User Guidelines
    1441
  - Example
    1441
- show captive-portal configuration
  1441
  - Syntax
    1441
  - Default Configuration
    1441
  - Command Mode
    1441
  - User Guidelines
    1441
  - Example
    1441
- show captive-portal configuration interface
  1442
  - Syntax
    1442
  - Default Configuration
    1442
  - Command Mode
    1442
  - User Guidelines
    1442
  - Example
    1442
- show captive-portal configuration locales
  1443
  - Syntax
    1443
  - Default Configuration
    1443
  - Command Mode
    1443
  - User Guidelines
    1443
  - Example
    1443
- show captive-portal configuration status
  1444
  - Syntax
    1444
  - Default Configuration
    1444
  - Command Mode
    1444
  - User Guidelines
    1444
  - Example
    1444
- user group
  1445
  - Syntax
    1445
  - Default Configuration
    1445
  - Command Mode
    1445
  - User Guidelines
    1445
  - Example
    1445
- user group moveusers
  1446
  - Syntax
    1446
  - Default Configuration
    1446
  - Command Mode
    1446
  - User Guidelines
    1446
  - Example
    1446
- user group name
  1446
  - Syntax
    1446
  - Default Configuration
    1446
  - Command Mode
    1447
  - User Guidelines
    1447
  - Example
    1447
CLI Macro Commands
1449
- Commands in this Chapter
  1450
- macro name
  1450
  - Syntax
    1450
  - Parameter Description
    1450
  - Default Configuration
    1450
  - Command Mode
    1451
  - User Guidelines
    1451
- macro global apply
  1451
  - Syntax
    1451
  - Parameter Description
    1452
  - Default Configuration
    1452
  - Command Mode
    1452
  - User Guidelines
    1452
- macro global trace
  1452
  - Syntax
    1452
  - Parameter Description
    1452
  - Default Configuration
    1453
  - Command Mode
    1453
  - User Guidelines
    1453
- macro global description
  1453
  - Syntax
    1453
  - Parameter Description
    1453
  - Default Configuration
    1453
  - Command Mode
    1454
  - User Guidelines
    1454
- macro apply
  1454
  - Syntax
    1454
  - Parameter Description
    1454
  - Default Configuration
    1454
  - Command Mode
    1454
  - User Guidelines
    1454
- macro trace
  1455
  - Syntax
    1455
  - Parameter Description
    1455
  - Default Configuration
    1455
  - Command Mode
    1455
  - User Guidelines
    1455
- macro description
  1456
  - Syntax
    1456
  - Parameter Description
    1456
  - Default Configuration
    1456
  - Command Mode
    1456
  - User Guidelines
    1456
- show parser macro
  1456
  - Syntax
    1456
  - Parameter Description
    1457
  - Default Configuration
    1457
  - Command Mode
    1457
  - User Guidelines
    1457
Clock Commands
1459
- Real-time Clock
  1459
- Simple Network Time Protocol
  1459
- Commands in this Chapter
  1460
- show sntp configuration
  1460
  - Syntax
    1460
  - Default Configuration
    1460
  - Command Mode
    1460
  - User Guidelines
    1460
  - Example
    1461
- show sntp server
  1461
  - Syntax
    1461
  - Parameter Description
    1461
  - Default Configuration
    1461
  - Command Mode
    1462
  - User Guidelines
    1462
  - Examples
    1462
- show sntp status
  1463
  - Syntax
    1463
  - Default Configuration
    1463
  - Command Mode
    1463
  - User Guidelines
    1463
  - Examples
    1463
- sntp authenticate
  1464
  - Syntax
    1464
  - Default Configuration
    1464
  - Command Mode
    1464
  - User Guidelines
    1464
  - Example
    1464
- sntp authentication-key
  1465
  - Syntax
    1465
  - Default value
    1465
  - Command Mode
    1465
  - User Guidelines
    1465
  - Examples
    1465
- sntp broadcast client enable
  1466
  - Syntax
    1466
  - Default Configuration
    1466
  - Command Mode
    1466
  - User Guidelines
    1466
  - Example
    1466
- sntp client poll timer
  1466
  - Syntax
    1466
  - Default Configuration
    1467
  - Command Mode
    1467
  - User Guidelines
    1467
  - Example
    1467
- sntp server
  1467
  - Syntax
    1467
  - Parameter Description
    1467
  - Default Configuration
    1467
  - Command Mode
    1468
  - User Guidelines
    1468
  - Example
    1468
- sntp trusted-key
  1468
  - Syntax
    1468
  - Default Configuration
    1468
  - Command Mode
    1468
  - User Guidelines
    1468
  - Example
    1469
- sntp unicast client enable
  1469
  - Syntax
    1469
  - Default Configuration
    1469
  - Command Mode
    1469
  - User Guidelines
    1469
  - Examples
    1469
- clock timezone hours-offset
  1470
  - Syntax
    1470
  - Command Mode
    1470
  - Default Value
    1470
  - User Guidelines
    1470
  - Example
    1470
- no clock timezone
  1470
  - Syntax
    1470
  - Default Configuration
    1470
  - Command Mode
    1471
  - User Guidelines
    1471
  - Example
    1471
- clock summer-time recurring
  1471
  - Syntax
    1471
  - Default Value
    1471
  - Command Mode
    1472
  - User Guidelines
    1472
  - Examples
    1472
- clock summer-time date
  1472
  - Syntax
    1472
  - Default Configuration
    1472
  - Command Mode
    1473
  - User Guidelines
    1473
  - Examples
    1473
- no clock summer-time
  1473
  - Syntax Description
    1473
  - Default Configuration
    1473
  - Command Mode
    1473
  - User Guidelines
    1473
  - Example
    1473
- show clock
  1474
  - Syntax Description
    1474
  - Default Configuration
    1474
  - Command Mode
    1474
  - User Guidelines
    1474
  - Example
    1474
Command Line Configuration Scripting Commands
1477
- Commands in this Chapter
  1477
- script apply
  1477
  - Syntax
    1477
  - Default Configuration
    1478
  - Command Mode
    1478
  - User Guidelines
    1478
  - Example
    1478
- script delete
  1478
  - Syntax
    1478
  - Default Configuration
    1478
  - Command Mode
    1478
  - User Guidelines
    1478
  - Example
    1478
- script list
  1479
  - Syntax
    1479
  - Default Configuration
    1479
  - Command Mode
    1479
  - User Guidelines
    1479
  - Example
    1479
- script show
  1479
  - Syntax
    1479
  - Default Configuration
    1480
  - Command Mode
    1480
  - User Guidelines
    1480
  - Example
    1480
- script validate
  1480
  - Syntax
    1480
  - Default Configuration
    1480
  - Command Mode
    1481
  - User Guidelines
    1481
  - Example
    1481
Configuration and Image File Commands
1483
- File System Commands
  1483
- Command Line Interface Scripting
  1483
- Commands in this Chapter
  1483
- boot system
  1484
  - Syntax
    1484
  - Parameter Description
    1484
  - Default Configuration
    1484
  - Command Mode
    1484
  - User Guidelines
    1485
  - Example #1
    1485
  - Example #2
    1485
- clear config
  1485
  - Syntax
    1485
  - Default Configuration
    1486
  - Command Mode
    1486
  - User Guidelines
    1486
  - Example
    1486
- copy
  1486
  - Syntax
    1486
  - Parameter Description
    1487
  - Default Configuration
    1489
  - Command Mode
    1489
  - User Guidelines
    1490
  - Examples
    1490
- delete
  1492
  - Syntax
    1492
  - Default Configuration
    1492
  - Command Mode
    1492
  - User Guidelines
    1492
  - Example
    1492
- delete backup-config
  1493
  - Syntax
    1493
  - Default Configuration
    1493
  - Command Mode
    1493
  - User Guidelines
    1493
  - Example
    1493
- delete backup-image
  1493
  - Syntax
    1493
  - Default Configuration
    1493
  - Command Mode
    1493
  - User Guidelines
    1494
  - Example
    1494
- delete startup-config
  1494
  - Syntax
    1494
  - Default Configuration
    1494
  - Command Mode
    1494
  - User Guidelines
    1494
  - Example
    1494
- dir
  1494
  - Syntax
    1495
  - Default Configuration
    1495
  - Command Mode
    1495
  - User Guidelines
    1495
  - Example
    1495
- erase
  1495
  - Syntax
    1495
  - Syntax Description
    1496
  - Default Configuration
    1496
  - Command Mode
    1496
  - User Guidelines
    1496
- filedescr
  1496
  - Syntax
    1496
  - Default Configuration
    1496
  - Command Mode
    1496
  - User Guidelines
    1497
  - Example
    1497
- rename
  1497
  - Syntax
    1497
  - Default Configuration
    1497
  - Command Mode
    1497
  - User Guidelines
    1497
  - Example
    1497
- show backup-config
  1498
  - Syntax
    1498
  - Default Configuration
    1498
  - Command Mode
    1498
  - User Guidelines
    1498
  - Example
    1498
- show bootvar
  1499
  - Syntax
    1499
  - Default Configuration
    1499
  - Command Mode
    1499
  - User Guidelines
    1499
  - Example
    1499
- show running-config
  1500
  - Syntax
    1500
  - Default Configuration
    1500
  - Command Mode
    1500
  - User Guidelines
    1500
  - Example
    1500
- show startup-config
  1501
  - Syntax
    1501
  - Default Configuration
    1501
  - Command Mode
    1501
  - User Guidelines
    1501
  - Example
    1501
- update bootcode
  1503
  - Syntax
    1503
  - Default Configuration
    1503
  - Command Mode
    1503
  - User Guidelines
    1503
  - Example
    1503
- write
  1503
  - Syntax
    1504
  - Default Configuration
    1504
  - Command Mode
    1504
  - Usage Guidelines
    1504
  - Example
    1504
Denial of Service Commands
1505
- Commands in this Chapter
  1506
- dos-control firstfrag
  1507
  - Syntax
    1507
  - Default Configuration
    1507
  - Command Mode
    1507
  - User Guidelines
    1507
  - Example
    1507
- dos-control icmp
  1507
  - Syntax
    1508
  - Default Configuration
    1508
  - Command Mode
    1508
  - User Guidelines
    1508
  - Example
    1508
- dos-control l4port
  1508
  - Syntax
    1508
  - Default Configuration
    1508
  - Command Mode
    1509
  - User Guidelines
    1509
  - Example
    1509
- dos-control sipdip
  1509
  - Syntax
    1509
  - Default Configuration
    1509
  - Command Mode
    1509
  - User Guidelines
    1509
  - Example
    1509
- dos-control tcpflag
  1510
  - Syntax
    1510
  - Default Configuration
    1510
  - Command Mode
    1510
  - User Guidelines
    1510
  - Example
    1510
- dos-control tcpfrag
  1510
  - Syntax
    1510
  - Default Configuration
    1511
  - Command Mode
    1511
  - User Guidelines
    1511
  - Example
    1511
- ip icmp echo-reply
  1511
  - Syntax
    1511
  - Default Configuration
    1511
  - Command Mode
    1511
  - User Guidelines
    1511
  - Example
    1512
- ip icmp error-interval
  1512
  - Syntax
    1512
  - Default Configuration
    1512
  - Command Mode
    1512
  - User Guidelines
    1512
  - Example
    1512
- ip unreachables
  1513
  - Syntax
    1513
  - Default Configuration
    1513
  - Command Mode
    1513
  - User Guidelines
    1513
  - Example
    1513
- ip redirects
  1513
  - Syntax
    1513
  - Default Configuration
    1513
  - Command Mode
    1514
  - User Guidelines
    1514
  - Example
    1514
- ipv6 icmp error-interval
  1514
  - Syntax
    1514
  - Default Configuration
    1514
  - Command Mode
    1514
  - User Guidelines
    1515
  - Example
    1515
- ipv6 unreachables
  1515
  - Syntax
    1515
  - Default Configuration
    1515
  - Command Mode
    1515
  - User Guidelines
    1515
  - Example
    1515
- show dos-control
  1515
  - Syntax
    1515
  - Default Configuration
    1516
  - Command Mode
    1516
  - User Guidelines
    1516
  - Example
    1516
Line Commands
1517
- exec-timeout
  1517
  - Syntax
    1517
  - Default Configuration
    1517
  - Command Mode
    1517
  - User Guidelines
    1518
  - Example
    1518
- history
  1518
  - Syntax
    1518
  - Default Configuration
    1518
  - Command Mode
    1518
  - User Guidelines
    1518
  - Example
    1518
- history size
  1519
  - Syntax
    1519
  - Parameter Description
    1519
  - Default Configuration
    1519
  - Command Mode
    1519
  - User Guidelines
    1519
  - Example
    1519
- line
  1519
  - Syntax
    1520
  - Default Configuration
    1520
  - Command Mode
    1520
  - User Guidelines
    1520
  - Examples
    1520
- show line
  1521
  - Syntax
    1521
  - Default Configuration
    1521
  - Command Mode
    1521
  - User Guidelines
    1521
  - Example
    1521
- speed
  1522
  - Syntax
    1522
  - Default Configuration
    1522
  - Command Mode
    1522
  - User Guidelines
    1522
  - Example
    1522
Management ACL Commands
1523
- Commands in this Chapter
  1523
- deny (management)
  1524
  - Syntax
    1524
  - Default Configuration
    1524
  - Command Mode
    1525
  - User Guidelines
    1525
  - Example
    1525
- management access-class
  1525
  - Syntax
    1525
  - Default Configuration
    1525
  - Command Mode
    1525
  - User Guidelines
    1525
  - Example
    1526
- management access-list
  1526
  - Syntax
    1526
  - Default Configuration
    1526
  - Command Mode
    1526
  - User Guidelines
    1526
  - Examples
    1527
- permit (management)
  1527
  - Syntax
    1527
  - Default Configuration
    1528
  - Command Mode
    1528
  - User Guidelines
    1528
  - Examples
    1528
- show management access-class
  1529
  - Syntax
    1529
  - Default Configuration
    1529
  - Command Mode
    1529
  - User Guidelines
    1529
  - Example
    1529
- show management access-list
  1530
  - Syntax
    1530
  - Default Configuration
    1530
  - Command Mode
    1530
  - User Guidelines
    1530
  - Example
    1530
Mode Commands
1531
- configure terminal
  1531
  - Syntax
    1531
  - Default Configuration
    1531
  - Command Mode
    1531
  - Example
    1531
- do
  1531
  - Syntax
    1532
  - Default Configuration
    1532
  - Command Mode
    1532
  - User Guidelines
    1532
  - Example #1
    1532
Password Management Commands
1535
- Configurable Minimum Password Length
  1535
- Password History
  1535
- Password Aging
  1535
- User Lockout
  1535
- Password Strength
  1536
  - Password Strength Definition:
    1536
- Commands in this Chapter
  1537
- passwords aging
  1538
  - Syntax
    1538
  - Parameter Description
    1538
  - Default Configuration
    1538
  - Command Mode
    1538
  - User Guidelines
    1538
  - Example
    1538
- passwords history
  1538
  - Syntax
    1539
  - Parameter Description
    1539
  - Default Configuration
    1539
  - Command Mode
    1539
  - User Guidelines
    1539
  - Example
    1539
- passwords lock-out
  1539
  - Syntax
    1539
  - Parameter Description
    1540
  - Default Behavior
    1540
  - Command Mode
    1540
  - User Guidelines
    1540
  - Example
    1540
- passwords min-length
  1540
  - Syntax
    1540
  - Default Configuration
    1540
  - Command Mode
    1541
  - User Guidelines
    1541
  - Example
    1541
- passwords strength-check
  1541
  - Syntax
    1541
  - Parameter Description
    1541
  - Default Behavior
    1541
  - Command Mode
    1541
  - User Guidelines
    1541
- passwords strength minimum uppercase-letters
  1542
  - Syntax
    1542
  - Parameter Description
    1542
  - Default Behavior
    1542
  - Command Mode
    1542
  - User Guidelines
    1542
  - Example
    1543
- passwords strength minimum lowercase-letters
  1543
  - Syntax
    1543
  - Parameter Description
    1543
  - Default Behavior
    1543
  - Command Mode
    1543
  - User Guidelines
    1543
  - Example
    1543
- passwords strength minimum numeric- characters
  1544
  - Syntax
    1544
  - Parameter Description
    1544
  - Default Behavior
    1544
  - Command Mode
    1544
  - User Guidelines
    1544
  - Example
    1544
- passwords strength minimum special-characters
  1545
  - Syntax
    1545
  - Parameter Description
    1545
  - Default Behavior
    1545
  - Command Mode
    1545
  - User Guidelines
    1545
  - Example
    1545
- passwords strength max-limit consecutive- characters
  1545
  - Syntax
    1546
  - Parameter Description
    1546
  - Default Behavior
    1546
  - Command Mode
    1546
  - User Guidelines
    1546
  - Example
    1546
- passwords strength max-limit repeated- characters
  1546
  - Syntax
    1547
  - Parameter Description
    1547
  - Default Behavior
    1547
  - Command Mode
    1547
  - User Guidelines
    1547
  - Example
    1547
- passwords strength minimum character-classes
  1547
  - Syntax
    1547
  - Parameter Description
    1547
  - Default Behavior
    1548
  - Command Mode
    1548
  - User Guidelines
    1548
  - Example
    1548
- passwords strength exclude-keyword
  1548
  - Syntax
    1548
  - Parameter Description
    1549
  - Default Behavior
    1549
  - Command Mode
    1549
  - User Guidelines
    1549
  - Example
    1549
- enable password encrypted
  1549
  - Syntax
    1549
  - Parameter Description
    1549
  - Default Behavior
    1549
  - Command Mode
    1549
  - User Guidelines
    1549
- show passwords configuration
  1550
  - Syntax
    1550
  - Parameter Description
    1550
  - Default Configuration
    1551
  - Command Mode
    1551
  - User Guidelines
    1551
  - Example
    1551
- show passwords result
  1552
  - Syntax
    1552
  - Parameter Description
    1552
  - Default Configuration
    1552
  - Command Mode
    1552
  - User Guidelines
    1552
  - Example
    1552
PHY Diagnostics Commands
1553
- show copper-ports tdr
  1553
  - Syntax
    1553
  - Default Configuration
    1553
  - Command Mode
    1553
  - User Guidelines
    1553
  - Example
    1553
- show fiber-ports optical-transceiver
  1554
  - Syntax
    1554
  - Default Configuration
    1554
  - Command Mode
    1554
  - User Guidelines
    1554
  - Examples
    1554
- test copper-port tdr
  1555
  - Syntax
    1555
  - Default Configuration
    1555
  - Command Mode
    1555
  - User Guidelines.
    1555
  - Examples
    1555
RMON Commands
1557
- Commands in this Chapter
  1557
- rmon alarm
  1557
  - Syntax
    1558
  - Syntax Description
    1558
  - Default Configuration
    1559
  - Command Mode
    1559
  - User Guidelines
    1559
  - Example
    1559
- rmon collection history
  1560
  - Syntax
    1560
  - Default Configuration
    1560
  - Command Mode
    1560
  - User Guidelines
    1560
  - Example
    1560
- rmon event
  1561
  - Syntax
    1561
  - Parameter Description
    1561
  - Default Configuration
    1561
  - Command Mode
    1561
  - User Guidelines
    1561
  - Example
    1562
- show rmon alarm
  1562
  - Syntax
    1562
  - Default Configuration
    1562
  - Command Mode
    1562
  - User Guidelines
    1562
  - Example
    1562
- show rmon alarms
  1564
  - Syntax
    1564
  - Default Configuration
    1564
  - Command Mode
    1564
  - User Guidelines
    1564
  - Example
    1564
- show rmon collection history
  1565
  - Syntax
    1565
  - Default Configuration
    1565
  - Command Mode
    1565
  - User Guidelines
    1565
  - Example
    1565
- show rmon events
  1566
  - Syntax
    1566
  - Default Configuration
    1566
  - Command Mode
    1566
  - User Guidelines
    1566
  - Example
    1567
- show rmon history
  1567
  - Syntax
    1567
  - Default Configuration
    1568
  - Command Mode
    1568
  - User Guidelines
    1568
  - Examples
    1568
- show rmon log
  1571
  - Syntax
    1571
  - Default Configuration
    1571
  - Command Mode
    1571
  - User Guidelines
    1571
  - Example
    1571
- show rmon statistics
  1572
  - Syntax
    1572
  - Default Configuration
    1572
  - Command Mode
    1572
  - User Guidelines
    1572
  - Example
    1573
SDM Templates Commands
1577
- Commands in this Chapter
  1577
- sdm prefer
  1577
  - Syntax
    1577
  - Parameter Description
    1578
  - Default Configuration
    1578
  - Command Mode
    1578
  - User Guidelines
    1578
- show sdm prefer
  1579
  - Syntax
    1579
  - Parameter Description
    1579
  - Default Configuration
    1580
  - Command Mode
    1580
  - User Guidelines
    1580
  - Examples
    1580
Serviceability Tracing Packet Commands
1583
- Commands in this Chapter
  1583
- debug arp
  1584
  - Syntax
    1584
  - Default Configuration
    1584
  - Command Mode
    1584
  - User Guidelines
    1584
  - Example
    1584
- debug auto-voip
  1585
  - Syntax
    1585
  - Default Configuration
    1585
  - Command Mode
    1585
  - User Guidelines
    1585
  - Example
    1585
- debug clear
  1585
  - Syntax
    1585
  - Default Configuration
    1585
  - Command Mode
    1585
  - User Guidelines
    1586
  - Example
    1586
- debug console
  1586
  - Syntax
    1586
  - Default Configuration
    1586
  - Command Mode
    1586
  - User Guidelines
    1586
  - Example
    1586
- debug dot1x
  1586
  - Syntax
    1587
  - Default Configuration
    1587
  - Command Mode
    1587
  - User Guidelines
    1587
  - Example
    1587
- debug igmpsnooping
  1587
  - Syntax
    1587
  - Default Configuration
    1587
  - Command Mode
    1587
  - User Guidelines
    1588
  - Example
    1588
- debug ip acl
  1588
  - Syntax
    1588
  - Default Configuration
    1588
  - Command Mode
    1588
  - User Guidelines
    1588
  - Example
    1588
- debug ip dvmrp
  1588
  - Syntax
    1589
  - Default Configuration
    1589
  - Command Mode
    1589
  - User Guidelines
    1589
  - Example
    1589
- debug ip igmp
  1589
  - Syntax
    1589
  - Default Configuration
    1590
  - Command Mode
    1590
  - User Guidelines
    1590
  - Example
    1590
- debug ip mcache
  1590
  - Syntax
    1590
  - Default Configuration
    1590
  - Command Mode
    1590
  - User Guidelines
    1590
  - Example
    1591
- debug ip pimdm packet
  1591
  - Syntax
    1591
  - Default Configuration
    1591
  - Command Mode
    1591
  - User Guidelines
    1591
  - Example
    1591
- debug ip pimsm packet
  1592
  - Syntax
    1592
  - Default Configuration
    1592
  - Command Mode
    1592
  - User Guidelines
    1592
  - Example
    1592
- debug ip vrrp
  1592
  - Syntax
    1592
  - Default Configuration
    1593
  - Command Mode
    1593
  - User Guidelines
    1593
  - Example
    1593
- debug ipv6 dhcp
  1593
  - Syntax
    1593
  - Parameter Description
    1593
  - Default Configuration
    1593
  - Command Mode
    1593
  - User Guidelines
    1593
  - Examples
    1594
- debug ipv6 mcache
  1594
  - Syntax
    1594
  - Default Configuration
    1594
  - Command Mode
    1594
  - User Guidelines
    1594
  - Example
    1594
- debug ipv6 mld
  1594
  - Syntax
    1595
  - Default Configuration
    1595
  - Command Mode
    1595
  - User Guidelines
    1595
  - Example
    1595
- debug ipv6 pimdm
  1595
  - Syntax
    1595
  - Default Configuration
    1596
  - Command Mode
    1596
  - Usage Guidelines
    1596
  - Example
    1596
- debug ipv6 pimsm
  1596
  - Syntax
    1596
  - Default Configuration
    1596
  - Command Mode
    1596
  - Usage Guidelines
    1597
  - Example
    1597
- debug isdp
  1597
  - Syntax
    1597
  - Default Configuration
    1597
  - Command Mode
    1597
  - Usage Guidelines
    1597
  - Example
    1597
- debug lacp
  1598
  - Syntax
    1598
  - Default Configuration
    1598
  - Command Mode
    1598
  - Usage Guidelines
    1598
  - Example
    1598
- debug mldsnooping
  1598
  - Syntax
    1598
  - Default Configuration
    1599
  - Command Mode
    1599
  - Usage Guidelines
    1599
  - Example
    1599
- debug ospf
  1599
  - Syntax
    1599
  - Default Configuration
    1599
  - Command Mode
    1599
  - Usage Guidelines
    1599
  - Example
    1599
- debug ospfv3
  1600
  - Syntax
    1600
  - Default Configuration
    1600
  - Command Mode
    1600
  - Usage Guidelines
    1600
  - Example
    1600
- debug ping
  1600
  - Syntax
    1600
  - Default Configuration
    1600
  - Command Mode
    1601
  - Usage Guidelines
    1601
  - Example
    1601
- debug rip
  1601
  - Syntax
    1601
  - Default Configuration
    1601
  - Command Mode
    1601
  - Usage Guidelines
    1601
  - Example
    1601
- debug sflow
  1602
  - Syntax
    1602
  - Default Configuration
    1602
  - Command Mode
    1602
  - Usage Guidelines
    1602
  - Example
    1602
- debug spanning-tree
  1602
  - Syntax
    1602
  - Default Configuration
    1603
  - Command Mode
    1603
  - Usage Guidelines
    1603
  - Example
    1603
- debug vrrp
  1603
  - Syntax
    1603
  - Default Configuration
    1603
  - Command Mode
    1603
  - User Guidelines
    1603
- show debugging
  1603
  - Syntax
    1604
  - Default Configuration
    1604
  - Command Mode
    1604
  - Usage Guidelines
    1604
  - Example
    1604
Sflow Commands
1605
- Commands in this Chapter
  1605
- sflow destination
  1605
  - Syntax
    1606
  - Default Configuration
    1606
  - Command Mode
    1607
  - User Guidelines
    1607
  - Example
    1607
- sflow polling
  1607
  - Syntax
    1607
  - Default Configuration
    1608
  - Command Mode
    1608
  - User Guidelines
    1608
  - Example
    1608
- sflow polling (Interface Mode)
  1608
  - Syntax
    1608
  - Default Configuration
    1608
  - Command Mode
    1609
  - User Guidelines
    1609
  - Example
    1609
- sflow sampling
  1609
  - Syntax
    1609
  - Default Configuration
    1609
  - Command Mode
    1610
  - User Guidelines
    1610
  - Example
    1610
- sflow sampling (Interface Mode)
  1610
  - Syntax
    1610
  - Default Configuration
    1611
  - Command Mode
    1611
  - User Guidelines
    1611
  - Example
    1611
- show sflow agent
  1611
  - Syntax
    1611
  - Default Configuration
    1611
  - Command Mode
    1611
  - User Guidelines
    1611
  - Example
    1612
- show sflow destination
  1612
  - Syntax
    1612
  - Default Configuration
    1612
  - Command Mode
    1612
  - User Guidelines
    1612
  - Example
    1613
- show sflow polling
  1613
  - Syntax
    1613
  - Default Configuration
    1613
  - Command Mode
    1614
  - User Guidelines
    1614
  - Example
    1614
- show sflow sampling
  1614
  - Syntax
    1614
  - Default Configuration
    1614
  - Command Mode
    1615
  - User Guidelines
    1615
  - Example
    1615
SNMP Commands
1617
- Commands in this Chapter
  1617
- show snmp
  1617
  - Syntax
    1618
  - Default Configuration
    1618
  - Command Mode
    1618
  - User Guidelines
    1618
  - Example
    1618
- show snmp engineID
  1619
  - Syntax
    1619
  - Default Configuration
    1619
  - Command Mode
    1619
  - User Guidelines
    1619
  - Example
    1619
- show snmp filters
  1619
  - Syntax
    1620
  - Default Configuration
    1620
  - Command Mode
    1620
  - User Guidelines
    1620
  - Example
    1620
- show snmp group
  1621
  - Syntax
    1621
  - Default Configuration
    1621
  - Command Mode
    1621
  - User Guidelines
    1621
  - Example
    1621
- show snmp user
  1622
  - Syntax
    1622
  - Default Configuration
    1622
  - Command Mode
    1622
  - User Guidelines
    1623
  - Example
    1623
- show snmp views
  1623
  - Syntax
    1623
  - Default Configuration
    1623
  - Command Mode
    1624
  - User Guidelines
    1624
  - Example
    1624
- show trapflags
  1624
  - Syntax
    1624
  - Parameter Description
    1624
  - Default Configuration
    1625
  - Command Mode
    1625
  - User Guidelines
    1625
  - Example #1
    1625
  - Example #2
    1625
- snmp-server community
  1626
  - Syntax
    1626
  - Parameter Description
    1627
  - Default Configuration
    1627
  - Command Mode
    1627
  - User Guidelines
    1627
  - Example
    1628
- snmp-server community-group
  1628
  - Syntax
    1628
  - Default Configuration
    1628
  - Command Mode
    1628
  - User Guidelines
    1629
  - Example
    1629
- snmp-server contact
  1629
  - Syntax
    1629
  - Default Configuration
    1629
  - Command Mode
    1629
  - User Guidelines
    1629
  - Example
    1630
- snmp-server enable traps
  1630
  - Syntax
    1630
  - Parameter Description
    1631
  - Default Configuration
    1631
  - Command Mode
    1631
  - User Guidelines
    1631
  - Example
    1631
- snmp-server engineID local
  1632
  - Syntax
    1632
  - Default Configuration
    1632
  - Command Mode
    1632
  - User Guidelines
    1633
  - Example
    1633
- snmp-server filter
  1633
  - Syntax
    1633
  - Default Configuration
    1634
  - Command Mode
    1634
  - User Guidelines
    1634
  - Examples
    1634
- snmp-server group
  1635
  - Syntax
    1635
  - Default Configuration
    1636
  - Command Mode
    1636
  - User Guidelines
    1636
  - Example
    1636
- snmp-server host
  1636
  - Syntax
    1636
  - Parameter Description
    1637
  - Default Configuration
    1637
  - Command Mode
    1637
  - User Guidelines
    1638
  - Example
    1638
- snmp-server location
  1638
  - Syntax
    1638
  - Default Configuration
    1638
  - Command Mode
    1638
  - User Guidelines
    1638
  - Example
    1638
- snmp-server user
  1639
  - Syntax
    1639
  - Default Configuration
    1640
  - Command Mode
    1640
  - User Guidelines
    1640
  - Example
    1640
- snmp-server view
  1640
  - Syntax
    1640
  - Default Configuration
    1641
  - Command Mode
    1641
  - User Guidelines
    1641
  - Examples
    1641
- snmp-server v3-host
  1642
  - Syntax
    1642
  - Default Configuration
    1643
  - Command Mode
    1643
  - User Guidelines
    1643
  - Example
    1643
SSH Commands
1645
- Commands in this Chapter
  1645
- crypto key generate dsa
  1645
  - Syntax
    1645
  - Default Configuration
    1646
  - Command Mode
    1646
  - User Guidelines
    1646
  - Example
    1646
- crypto key generate rsa
  1646
  - Syntax
    1646
  - Default Configuration
    1646
  - Command Mode
    1646
  - User Guidelines
    1647
  - Example
    1647
- crypto key pubkey-chain ssh
  1647
  - Syntax
    1647
  - Default Configuration
    1647
  - Command Mode
    1647
  - User Guidelines
    1647
  - Example
    1647
- crypto key zeroize pubkey-chain
  1648
  - Syntax
    1648
  - Default Configuration
    1648
  - Command Mode
    1648
  - User Guidelines
    1648
  - Example
    1648
- crypto key zeroize {rsa|dsa}
  1649
  - Syntax
    1649
  - Default Configuration
    1649
  - Command Mode
    1649
  - User Guidelines
    1649
  - Example
    1649
- ip ssh port
  1649
  - Syntax
    1649
  - Default Configuration
    1649
  - Command Mode
    1650
  - User Guidelines
    1650
  - Example
    1650
- ip ssh pubkey-auth
  1650
  - Syntax
    1650
  - Default Configuration
    1650
  - Command Mode
    1650
  - User Guidelines
    1650
  - Example
    1650
- ip ssh server
  1651
  - Syntax
    1651
  - Default Configuration
    1651
  - Command Mode
    1651
  - User Guidelines
    1651
  - Example
    1651
- key-string
  1651
  - Syntax
    1651
  - Default Configuration
    1652
  - Command Mode
    1652
  - User Guidelines
    1652
  - Examples
    1652
- no crypto certificate
  1653
  - Syntax
    1653
  - Default Configuration
    1653
  - Command Mode
    1653
  - User Guidelines
    1653
  - Example
    1653
- show crypto key mypubkey
  1654
  - Syntax
    1654
  - Default Configuration
    1654
  - Command Mode
    1654
  - User Guidelines
    1654
  - Example
    1654
- show crypto key pubkey-chain ssh
  1655
  - Syntax
    1655
  - Default Configuration
    1655
  - Command Mode
    1655
  - User Guidelines
    1655
  - Example
    1655
- show ip ssh
  1656
  - Syntax
    1656
  - Default Configuration
    1656
  - Command Mode
    1656
  - User Guidelines
    1656
  - Example
    1656
- user-key
  1657
  - Syntax
    1657
  - Default Configuration
    1657
  - Command Mode
    1657
  - User Guidelines
    1657
  - Example
    1657
Syslog Commands
1659
- CLI Logged to Local File and Syslog Server
  1659
- Commands in this Chapter
  1660
- clear logging
  1661
  - Syntax
    1661
  - Default Configuration
    1661
  - Command Mode
    1661
  - User Guidelines
    1661
  - Example
    1661
- clear logging file
  1661
  - Syntax
    1661
  - Default Configuration
    1661
  - Command Mode
    1662
  - User Guidelines
    1662
  - Example
    1662
- description (Logging)
  1662
  - Syntax
    1662
  - Default Configuration
    1662
  - Command Mode
    1662
  - User Guidelines
    1662
  - Example
    1662
- level
  1663
  - Syntax
    1663
  - Parameter Description
    1663
  - Default Configuration
    1663
  - Command Mode
    1663
  - User Guidelines
    1663
  - Example
    1663
- logging cli-command
  1663
  - Syntax
    1664
  - Default Configuration
    1664
  - Command Mode
    1664
  - User Guidelines
    1664
  - Example
    1664
- logging
  1665
  - Syntax
    1665
  - Default Configuration
    1665
  - Command Mode
    1666
  - User Guidelines
    1666
  - Example
    1667
- logging audit
  1667
  - Syntax
    1667
  - Default Configuration
    1667
  - Command Mode
    1667
  - Example
    1667
- logging buffered
  1668
  - Syntax
    1668
  - Parameter Description
    1668
  - Default Configuration
    1668
  - Command Mode
    1668
  - User Guidelines
    1668
  - Example
    1669
- logging console
  1669
  - Syntax
    1669
  - Parameter Description
    1669
  - Default Configuration
    1669
  - Command Mode
    1669
  - User Guidelines
    1670
  - Example
    1670
- logging facility
  1670
  - Syntax
    1670
  - Parameter Description
    1670
  - Default Configuration
    1670
  - Command Mode
    1670
  - User Guidelines
    1670
  - Example
    1670
- logging file
  1671
  - Syntax
    1671
  - Parameter Description
    1671
  - Default Configuration
    1671
  - Command Mode
    1671
  - User Guidelines
    1671
  - Example
    1672
- logging monitor
  1672
  - Syntax
    1672
  - Parameter Description
    1672
  - Default Configuration
    1672
  - Command Mode
    1673
  - User Guidelines
    1673
- logging on
  1673
  - Syntax
    1673
  - Default Configuration
    1673
  - Command Mode
    1673
  - User Guidelines
    1673
  - Example
    1674
- logging snmp
  1674
  - Syntax
    1674
  - Default Configuration
    1674
  - Command Mode
    1674
  - User Guidelines
    1674
  - Example
    1674
- logging web-session
  1674
  - Syntax
    1674
  - Default Configuration
    1675
  - Command Mode
    1675
  - User Guidelines
    1675
  - Example
    1675
- port
  1675
  - Syntax
    1675
  - Parameter Description
    1675
  - Default Configuration
    1676
  - Command Mode
    1676
  - User Guidelines
    1676
  - Example
    1676
- show logging
  1676
  - Syntax
    1676
  - Default Configuration
    1676
  - Command Mode
    1676
  - User Guidelines
    1676
  - Example
    1676
- show logging file
  1677
  - Syntax
    1677
  - Default Configuration
    1677
  - Command Mode
    1677
  - User Guidelines
    1677
  - Example
    1678
- show syslog-servers
  1678
  - Syntax
    1678
  - Default Configuration
    1678
  - Command Mode
    1678
  - User Guidelines
    1678
  - Example
    1678
- terminal monitor
  1679
  - Syntax
    1679
  - Default Configuration
    1679
  - Command Mode
    1679
  - User Guidelines
    1679
System Management Commands
1681
- asset-tag
  1681
  - Syntax
    1682
  - Default Configuration
    1682
  - Command Mode
    1682
  - User Guidelines
    1682
  - Example
    1682
- banner exec
  1682
  - Syntax
    1682
  - Default Configuration
    1683
  - Command Mode
    1683
  - User Guidelines
    1683
  - Example
    1683
- banner login
  1683
  - Syntax
    1683
  - Default Configuration
    1683
  - Command Mode
    1683
  - User Guidelines
    1684
  - Example
    1684
- banner motd
  1684
  - Syntax
    1684
  - Default Configuration
    1684
  - Command Mode
    1684
  - User Guidelines
    1684
  - Example
    1685
- banner motd acknowledge
  1685
  - Syntax
    1685
  - Default Configuration
    1685
  - Command Mode
    1685
  - User Guidelines
    1685
  - Example
    1687
- clear checkpoint statistics
  1688
  - Syntax
    1688
  - Default Configuration
    1688
  - Command Mode
    1688
  - User Guidelines
    1688
  - Example
    1688
- clear counters stack-ports
  1688
  - Syntax
    1689
  - Default Configuration
    1689
  - Command Mode
    1689
  - User Guidelines
    1689
  - Example
    1689
- cut-through mode
  1689
  - Syntax
    1689
  - Default Configuration
    1689
  - Command Mode
    1689
  - User Guidelines
    1689
  - Example
    1690
- exec-banner
  1690
  - Syntax
    1690
  - Default Configuration
    1690
  - Command Mode
    1690
  - User Guidelines
    1690
  - Example
    1690
- hardware profile portmode
  1690
  - Syntax
    1691
  - Parameter Description
    1691
  - Default Configuration
    1691
  - Command Mode
    1691
  - User Guidelines
    1691
- hostname
  1691
  - Syntax
    1691
  - Default Configuration
    1692
  - Command Mode
    1692
  - User Guidelines
    1692
  - Example
    1692
- initiate failover
  1692
  - Syntax
    1692
  - Default Configuration
    1692
  - Command Mode
    1692
  - User Guidelines
    1693
  - Example
    1693
- locate
  1693
  - Syntax
    1693
  - Parameter Description
    1693
  - Default Configuration
    1693
  - Command Mode
    1694
  - User Guidelines
    1694
  - Example
    1694
- login-banner
  1694
  - Syntax
    1694
  - Default Configuration
    1694
  - Command Mode
    1694
  - User Guidelines
    1694
  - Example
    1694
- media-type
  1695
  - Syntax
    1695
  - Parameter Description
    1695
  - Default Configuration
    1695
  - Command Mode
    1695
  - User Guidelines
    1695
  - Example
    1695
- member
  1696
  - Syntax
    1696
  - Default configuration
    1696
  - Command Mode
    1696
  - User Guidelines
    1696
  - Example
    1697
- motd-banner
  1697
  - Syntax
    1697
  - Default Configuration
    1697
  - Command Mode
    1697
  - User Guidelines
    1697
  - Example
    1697
- nsf
  1697
  - Syntax
    1698
  - Default Configuration
    1698
  - Command Mode
    1698
  - User Guidelines
    1698
  - Example
    1698
- ping
  1698
  - Syntax
    1698
  - Default Configuration
    1699
  - Command Mode
    1699
  - User Guidelines
    1699
  - Examples
    1699
- reload
  1700
  - Syntax
    1700
  - Parameter Description
    1700
  - Default Configuration
    1700
  - Command Mode
    1700
  - User Guidelines
    1701
  - Example
    1701
- set description
  1701
  - Syntax
    1701
  - Default Configuration
    1701
  - Command Mode
    1701
  - User Guidelines
    1701
  - Example
    1702
- slot
  1702
  - Syntax
    1702
  - Default Configuration
    1703
  - Command Mode
    1703
  - User Guidelines
    1703
- show banner
  1703
  - Syntax
    1703
  - Default Configuration
    1703
  - Command Mode
    1703
  - User Guidelines
    1703
  - Example
    1703
- show boot-version
  1704
  - Syntax
    1704
  - Default Configuration
    1704
  - Command Mode
    1705
  - User Guidelines
    1705
  - Example
    1705
- show checkpoint statistics
  1705
  - Syntax
    1705
  - Default Configuration
    1705
  - Command Mode
    1705
  - User Guidelines
    1705
  - Example
    1706
- show cut-through mode
  1706
  - Syntax
    1706
  - Command Mode
    1706
  - Default Configuration
    1706
  - User Guidelines
    1706
  - Example
    1706
- show hardware profile
  1707
  - Syntax
    1707
  - Default Configuration
    1707
  - Command Mode
    1707
  - User Guidelines
    1707
  - Examples
    1707
- show interfaces advanced firmware
  1708
  - Syntax
    1708
  - Parameter Description
    1708
  - Default Configuration
    1708
  - Command Mode
    1708
  - User Guidelines
    1708
  - Example
    1708
- show interfaces media-type
  1709
  - Syntax
    1709
  - Parameter Description
    1709
  - Default Configuration
    1709
  - Command Mode
    1709
  - User Guidelines
    1709
  - Example
    1709
- show memory cpu
  1710
  - Syntax
    1710
  - Default Configuration
    1710
  - Command Mode
    1710
  - User Guidelines
    1710
  - Example
    1710
- show nsf
  1710
  - Syntax
    1710
  - Default Configuration
    1711
  - Command Mode
    1711
  - User Guidelines
    1711
  - Example
    1711
- show power-usage-history
  1711
  - Syntax
    1711
  - Parameter Description
    1712
  - Default Configuration
    1712
  - Command Mode
    1712
  - User Guidelines
    1712
  - Example
    1712
- show process cpu
  1713
  - Syntax
    1713
  - Command Mode
    1713
  - Default Configuration
    1713
  - User Guidelines
    1713
  - Example
    1713
- show sessions
  1715
  - Syntax
    1715
  - Default Configuration
    1715
  - Command Mode
    1715
  - User Guidelines
    1715
  - Example
    1715
- show slot
  1716
  - Syntax
    1716
  - Default Configuration
    1717
  - Command Mode
    1717
  - User Guidelines
    1717
- show supported cardtype
  1717
  - Syntax
    1718
  - Default Configuration
    1718
  - Command Mode
    1718
  - User Guidelines
    1718
- show supported switchtype
  1719
  - Syntax
    1719
  - Default Configuration
    1719
  - Command Mode
    1719
  - User Guidelines
    1719
  - Example
    1719
- show switch
  1720
  - Syntax
    1721
  - Parameter Description
    1721
  - Default Configuration
    1722
  - Command Mode
    1722
  - User Guidelines
    1722
  - Examples
    1722
- show system
  1728
  - Syntax
    1729
  - Default Configuration
    1729
  - Command Mode
    1729
  - User Guidelines
    1729
- show system fan
  1729
  - Syntax
    1729
  - Default Configuration
    1729
  - Command Mode
    1729
  - User Guidelines
    1729
  - Example
    1729
- show system id
  1730
  - Syntax
    1730
  - Default Configuration
    1730
  - Command Mode
    1730
  - User Guidelines
    1730
  - Example
    1730
- show system power
  1731
  - Syntax
    1731
  - Parameter Description
    1731
  - Default Configuration
    1731
  - Command Mode
    1731
  - User Guidelines
    1731
  - Examples
    1731
- show system temperature
  1732
  - Syntax
    1732
  - Parameter Description
    1732
  - Default Configuration
    1732
  - Command Mode
    1732
  - User Guidelines
    1732
  - Examples
    1732
- show tech-support
  1733
  - Syntax
    1734
  - Parameter Ranges
    1734
  - Command Mode
    1734
  - Usage Guidelines
    1734
  - Default Value
    1734
  - Example
    1734
- show users
  1736
  - Syntax
    1736
  - Default Configuration
    1736
  - Command Mode
    1736
  - User Guidelines
    1736
  - Example
    1736
- show version
  1737
  - Syntax
    1737
  - Default Configuration
    1737
  - Command Mode
    1737
  - User Guidelines
    1737
  - Example
    1737
- stack
  1738
  - Syntax
    1738
  - Default Configuration
    1738
  - Command Mode
    1738
  - User Guidelines
    1738
  - Example
    1738
- stack-port
  1738
  - Syntax
    1739
  - Default Configuration
    1739
  - Command Mode
    1739
  - User Guidelines
    1739
  - Example
    1739
- standby
  1740
  - Syntax
    1740
  - Default Configuration
    1740
  - Command Mode
    1740
  - User Guidelines
    1740
  - Examples
    1740
- switch renumber
  1740
  - Syntax
    1741
  - Command Mode
    1741
  - User Guidelines
    1741
  - Example
    1741
- telnet
  1741
  - Syntax
    1741
  - Parameter Description
    1741
  - Keywords Table
    1742
  - Port Table
    1742
  - Default Configuration
    1743
  - Command Mode
    1743
  - User Guidelines
    1743
  - Example
    1744
- traceroute
  1744
  - Syntax
    1744
  - Parameter Description
    1744
  - Default Configuration
    1745
  - Command Mode
    1745
  - User Guidelines
    1745
  - Examples
    1745
Telnet Server Commands
1747
- Telnet Client Behaviors
  1747
  - Examples
    1748
- Commands in this Chapter
  1750
- ip telnet server disable
  1750
  - Syntax
    1750
  - Parameter Ranges
    1750
  - Command Mode
    1750
  - Usage Guidelines
    1750
  - Default Value
    1750
  - Example
    1750
- ip telnet port
  1751
  - Syntax
    1751
  - Default Configuration
    1751
  - Command Mode
    1751
  - Usage Guidelines
    1751
  - Example
    1751
- show ip telnet
  1751
  - Syntax
    1751
  - Default Configuration
    1751
  - Command Mode
    1752
  - Example
    1752
Terminal Length Commands
1753
- terminal length
  1753
  - Syntax
    1753
  - Default Configuration
    1753
  - Command Mode
    1753
  - User Guidelines
    1753
  - Example
    1753
Time Ranges Commands
1755
- time-range
  1755
  - Syntax
    1755
  - Parameter Description
    1755
  - Default Configuration
    1755
  - Command Mode
    1756
  - User Guidelines
    1756
  - Example
    1756
- absolute
  1756
  - Syntax
    1756
  - Parameter Description
    1756
  - Default Configuration
    1757
  - Command Mode
    1757
  - User Guidelines
    1757
  - Example
    1757
- periodic
  1757
  - Syntax
    1757
  - Parameter Description
    1758
  - Default Configuration
    1758
  - Command Mode
    1758
  - User Guidelines
    1758
  - Examples
    1759
- show time-range
  1759
  - Syntax
    1759
  - Parameter Description
    1760
  - Default Configuration
    1760
  - Command Mode
    1760
  - User Guidelines
    1760
  - Examples
    1760
User Interface Commands
1763
- enable
  1763
  - Syntax
    1763
  - Default Configuration
    1763
  - Command Mode
    1763
  - User Guidelines
    1763
  - Example
    1763
- end
  1764
  - Syntax
    1764
  - Default Configuration
    1764
  - Command Mode
    1764
  - User Guidelines
    1764
  - Example
    1764
- exit
  1764
  - Syntax
    1764
  - Default Configuration
    1764
  - Command Mode
    1765
  - User Guidelines
    1765
  - Example
    1765
- quit
  1765
  - Syntax
    1765
  - Default Configuration
    1765
  - Command Mode
    1765
  - User Guidelines
    1765
  - Example
    1766
Web Server Commands
1767
- Web Sessions
  1767
- Commands in this Chapter
  1768
- common-name
  1768
  - Syntax
    1768
  - Parameter Description
    1768
  - Default Configuration
    1769
  - Command Mode
    1769
  - User Guidelines
    1769
  - Example
    1769
- country
  1769
  - Syntax
    1769
  - Default Configuration
    1769
  - Command Mode
    1769
  - User Guidelines
    1769
  - Example
    1770
- crypto certificate generate
  1770
  - Syntax
    1770
  - Parameter Description
    1770
  - Default Configuration
    1770
  - Command Mode
    1770
  - User Guidelines
    1770
  - Example
    1770
- crypto certificate import
  1771
  - Syntax
    1771
  - Default Configuration
    1771
  - Command Mode
    1771
  - User Guidelines
    1771
  - Example
    1772
- crypto certificate request
  1772
  - Syntax
    1772
  - Default Configuration
    1772
  - Command Mode
    1773
  - User Guidelines
    1773
- duration
  1773
  - Syntax
    1773
  - Default Configuration
    1773
  - Command Mode
    1773
  - User Guidelines
    1774
  - Example
    1774
- ip http port
  1774
  - Syntax
    1774
  - Default Configuration
    1774
  - Command Mode
    1774
  - User Guidelines
    1774
  - Example
    1774
- ip http server
  1775
  - Syntax
    1775
  - Default Configuration
    1775
  - Command Mode
    1775
  - User Guidelines
    1775
  - Example
    1775
- ip http secure-certificate
  1775
  - Syntax
    1775
  - Parameter Description
    1776
  - Default Configuration
    1776
  - Command Mode
    1776
  - User Guidelines
    1776
  - Example
    1776
- ip http secure-port
  1776
  - Syntax
    1776
  - Parameter Description
    1776
  - Default Configuration
    1777
  - Command Mode
    1777
  - User Guidelines
    1777
  - Example
    1777
- ip http secure-server
  1777
  - Syntax
    1777
  - Default Configuration
    1777
  - Command Mode
    1777
  - User Guidelines
    1777
  - Example
    1778
- key-generate
  1778
  - Syntax
    1778
  - Default Configuration
    1778
  - Command Mode
    1778
  - User Guidelines
    1778
  - Example
    1778
- location
  1778
  - Syntax
    1779
  - Default Configuration
    1779
  - Command Mode
    1779
  - User Guidelines
    1779
  - Example
    1779
- organization-unit
  1779
  - Syntax
    1779
  - Default Configuration
    1779
  - Command Mode
    1779
  - User Guidelines
    1780
  - Example
    1780
- show crypto certificate mycertificate
  1780
  - Syntax
    1780
  - Default configuration
    1780
  - Command Mode
    1780
  - Example
    1780
- show ip http server status
  1781
  - Syntax
    1781
  - Syntax Description
    1781
  - Default Configuration
    1781
  - Command Mode
    1781
  - User Guidelines
    1781
  - Example
    1781
- show ip http server secure status
  1781
  - Syntax
    1782
  - Syntax Description
    1782
  - Default Configuration
    1782
  - Command Mode
    1782
  - User Guidelines
    1782
  - Example
    1782
- state
  1783
  - Syntax
    1783
  - Default Configuration
    1783
  - Command Mode
    1784
  - User Guidelines
    1784
  - Example
    1784
Appendix A: List of Commands
1785
- A
  1785
- B
  1786
- C
  1786
- D
  1788
- E
  1791
- F
  1791
- G
  1791
- H
  1792
- I
  1792
- K
  1798
- L
  1798
- M
  1799
- N
  1801
- O
  1801
- P
  1801
- Q
  1802
- R
  1802
- S
  1803
- T
  1814
- U
  1815
- V
  1816
- W
  1816

Manuel D’Utilisation

Taille:

27 Mo
Pages:

1818
Language:

English

Ouvrir le manuel