Manuels d'utilisation pour DMP Electronics XR2500F

Table des matières

• Introduction

  9
  • 1.1 Overview

    9
  • 1.2 System Components

    9
  • 1.3 Power Specifications

    9
  • 1.4 Communication

    9
  • 1.5 Panel Zones

    9
  • 1.6 Keypad Bus

    9
  • 1.7 LX-Bus™

    10
  • 1.8 Outputs

    10
  • 1.9 Relays

    10
  • 1.10 Zone Reference

    10
  • 1.11 Compliance Instructions

    10
• Mounting

  11
  • 2.1 Mounting the Enclosure

    11
  • 2.2 Surface Mounting

    11
  • 2.3 Flush Mounting

    11
  • 2.4 Fire Command Center LCD Keyboard

    11
  • 2.5 Metal Backplate

    11
  • 2.6 Wiring Diagram

    12
• AC Connection

  13
  • 3.1 Transformers and AC Power Connection

    13
  • 3.2 16 VAC Transformer

    13
  • 3.3 Earth Ground (GND)

    13
• Secondary Power Supply

  14
  • 4.1 Description

    14
  • 4.2 Battery Connection to XR2500F Command Processor panel

    14
• Two 866 NAC Modules

  15
  • 5.1 Description

    15
  • 5.2 Connection

    15
  • 5.3 Bell Silence/Bell Trouble

    15
• LX-Bus™ Operation

  16
  • 6.1 Description

    16
  • 6.2 XR2500F On-board LX-Bus

    16
  • 6.3 LX-Bus 481 Zone Expansion Interface Card

    16
  • 6.4 Installing the 481 Card

    16
• 893A Dual Phone Line Module

  17
  • 7.1 Description

    17
  • 7.2 Connection

    17
  • 7.3 Jumper Settings

    17
  • 7.4 Digital Dialer

    17
  • 7.5 Phone Line Monitor

    17
  • 7.6 Processor Fail Buzzer

    17
  • 7.7 J10 893A Connector

    17
  • 7.8 Ground start

    17
  • 7.9 Notification

    18
  • 7.10 FCC Registration

    18
• Fire Command Center

  19
  • 8.1 Description

    19
  • 8.2 Connection

    19
  • 8.3 Remote Fire Command Center

    19
• Expansion

  20
  • 9.1 Zone Expansion

    20
  • 9.2 Output Expansion

    20
• Accessory Devices

  21
  • 10.1 Wiring Diagram

    21
  • 10.2 Lightning Protection

    21
  • 10.3 Accessory Devices

    22
  • 10.4 Mounting Keypads and Zone Expansion Modules

    23
  • 10.5 Connecting LX-Bus and Keypad Bus Devices

    23
• Battery Information

  24
  • 11.1 Battery Only Restart

    24
  • 11.2 Battery Replacement Period

    24
  • 11.3 Discharge/Recharge

    24
  • 11.4 Battery Supervision

    24
  • 11.5 Battery Cutoff

    24
  • 12.6 XR2500F Power Requirements

    24
  • 11.7 XR2500F Standby Battery Calculations

    25
  • 11.8 Standby Battery Selection

    27
• Bell Output

  28
  • 12.1 Terminals 5 and 6

    28
• Keypad Bus

  28
  • 13.1 Description

    28
  • 13.2 Terminal 7 - RED

    28
  • 13.3 Terminal 8 - YELLOW

    28
  • 13.4 Terminal 9 - GREEN

    28
  • 13.5 Terminal 10 - BLACK

    28
  • 13.6 J8 Programming Connection

    28
  • 13.7 OVC LED

    28
• Smoke and Glassbreak Detector Output

  29
  • 14.1 Terminals 11 and 12

    29
  • 14.2 Current Rating

    29
• Powered Zones for 2-Wire Smoke Detectors

  29
  • 15.1 Terminals 25–26 and 27–28

    29
  • 15.2 Compatible 2-Wire Smoke Detector Chart

    30
• Protection Zones

  31
  • 16.1 Terminals 13–24

    31
  • 16.2 Operational Parameters

    31
  • 16.3 Zone Response Time

    31
  • 16.4 Keyswitch Arming Zone

    31
• Dry Contact Relay Outputs

  32
  • 17.1 Description

    32
  • 17.2 Contact Rating

    32
  • 17.3 Output Harness Wiring

    32
• J11 Annunciator Outputs

  33
  • 18.1 Description

    33
  • 18.2 Model 300 Harness Wiring

    33
  • 18.3 Model 860 Relay Module

    33
• J23 6-Pin Header

  33
  • 19.1 Description

    33
• J22 LX-Bus Expansion Connector

  34
  • 20.1 Description

    34
  • 20.2 LX-Bus Interface Cards

    34
  • 20.3 LX-Bus LEDs

    34
  • 20.4. OVC LED

    34
• J21 Serial Connector

  34
  • 21.1 Description

    34
  • 21.2 Serial Connector LEDs

    34
• J1 Ethernet Connector

  35
  • 22.1 Description

    35
  • 22.2 Ethernet LEDs

    35
• Reset and Tamper Headers

  35
  • 23.1 J16 Reset Header

    35
  • 23.2 J4 Tamper Header

    35
• Listed Compliance Specifications

  36
  • 24.1 Introduction

    36
• Universal UL Burglary Specifications

  36
  • 25.1 Introduction

    36
  • 25.2 Wiring

    36
  • 25.3 Control Outside of Protected Area

    36
  • 25.4 Police Station Phone Numbers

    36
  • 25.5 Bypass Reports

    36
  • 25.6 System Maintenance

    36
  • 25.7 Listed Receivers

    36
  • 25.8 Power Supply Supervision

    36
  • 25.9 Wireless Tamper

    36
  • 25.10 Wireless External Contact

    36
  • 25.11 Wireless Supervision Time

    36
  • 25.12 Detect Wireless Jamming

    36
• Area Information

  37
  • 26.1 Ownership

    37
  • 26.2 Annunciation

    37
  • 26.3 Trouble Display

    37
  • 26.4 Closing Wait

    37
  • 26.5 Local Bell Supervision

    37
• Household Burglar-Alarm System UnitsANSI/UL 1023

  37
  • 27.1 Audible Devices

    37
  • 27.2 Auxiliary Circuits

    37
  • 27.3 Bell Cutoff

    37
  • 27.4 Entry Delay

    37
  • 27.5 Exit Delay

    37
  • 27.6 Weekly Test

    37
  • 27.7 Wireless Audible Annunciation Option

    37
• Central-Station and Proprietary Burglar-Alarm UnitsANSI/ UL 1610 AND ANSI/UL 1076

  37
  • 28.1 Opening/Closing Reports

    37
  • 28.2 Closing Wait

    37
  • 28.3 Entry Delay

    37
  • 28.4 Exit Delay

    37
  • 28.5 Proprietary Dialer

    38
  • 28.6 DACT Central Station

    38
  • 28.7 Bell Cutoff

    38
  • 28.8 Standard or Encrypted Line Security

    38
  • 28.9 Wireless Audible Annunciation Option

    38
  • 28.10 Model 463G CELL Only, Standard or Encrypted Line Security

    38
  • 28.12 Model 463G NET with CELL as Alternate Primary and Dialer Backup, Standard or Encrypted Line Security

    39
  • 28.13 Model 463G NET with CELL as Backup and Adaptive Primary, Standard or Encrypted Line Security

    39
• Holdup Alarm Units ANSI/UL 636

  40
  • 29.1 ANSI/UL 1610 Required

    40
  • 29.2 1100X Wireless Receiver

    40
  • 29.3 Wireless Supervision Time

    40
  • 29.4 LED Display

    40
  • 29.5 Jamming Detection

    40
  • 29.6 Local Alarm

    40
  • 29.7 Message to Transmit

    40
  • 29.8 Wireless Audible Annunciation Option

    40
• Digital Burglar Alarm Communicator System UnitsANSI/ UL 1635

  40
  • 30.1 System Trouble Display

    40
  • 30.2 Digital Dialer Telephone Number

    40
  • 30.3 Test Time

    40
  • 30.4 Closing Wait

    40
• Police Station Connected and Local Burglar Alarm Units ANSI/UL 365

  40
  • 31.1 System Trouble Display

    40
  • 31.2 Entry Delay

    40
  • 31.3 Exit Delay

    40
  • 31.4 Bell

    41
  • 31.5 Bell Cutoff

    41
  • 31.6 Automatic Bell Test

    41
  • 31.8 Standard or Encrypted Line Security

    41
  • 31.9 Wireless Audible Annunciation Option

    41
  • 31.10 Model 463G CELL Only, Standard or Encrypted Line Security

    41
  • 31.12 Model 463G NET with CELL as Alternate Primary and Dialer Backup, Standard or Encrypted Line Security

    42
  • 31.13 Model 463G NET with CELL as Backup and Adaptive Primary, Standard or Encrypted Line Security

    42
• Police Station Connected and Local Burglar Alarm Units ANSI/UL 609

  43
  • 32.1 Mercantile

    43
  • 32.2 Entry Delay

    43
  • 32.3 Exit Delay

    43
  • 32.5 Bell

    43
  • 32.7 Wireless Audible Annunciation Option

    43
• Access Control System UnitsANSI/UL 294

  43
  • 33.1 Panel Designation

    43
  • 33.2 Compatible Devices

    43
• Universal Fire Alarm Specifications

  44
  • 34.1 Introduction

    44
  • 34.2 Wiring

    44
  • 34.3 Transformer

    44
  • 34.4 End-of-Line Resistor

    44
  • 34.5 System Trouble Display

    44
  • 34.6 Fire Display

    44
  • 34.7 Police Station Phone Number

    44
  • 34.8 System Maintenance

    44
  • 34.9 Audible Alarm

    44
  • 34.10 Fire Zone Programming

    44
  • 34.11 Style D Zones

    44
  • 34.12 Listed Receivers

    44
• Control Units for Fire-Protective Signaling SystemsANSI/UL 864, NFPA 72 (Chapter 9)

  45
  • 35.1 Power Supply

    45
  • 35.2 Zone Restoral Reports

    45
  • 35.3 Power Fail Delay

    45
  • 35.4 Sprinkler Supervisory

    45
  • 35.5 DACT Systems

    45
  • 35.7 Local Protective Signaling Systems

    45
  • 35.8 Remote Station Protective Signaling Systems

    45
  • 35.9 Fire Protective Signaling Systems using Internet/Intranet Networks

    45
  • 35.10 Combination Systems

    45
  • 35.11 Remote Annunciators

    45
  • 35.12 Notification Appliances

    46
  • 35.13 Cross Zoning

    46
  • 35.14 Ground Fault

    46
• Household Fire Warning System UnitsANSI/UL 985, NFPA 72 (Chapter 2)

  46
  • 36.1 Bell Output Definition

    46
  • 36.2 Audible Devices

    46
  • 36.3 Auxiliary Circuits

    46
  • 36.4 Bell Cutoff

    46
• California State Fire Marshal Specifications

  47
  • 37.1 Bell Output Definition

    47
• New York City (MEA) Specifications

  47
  • 38.1 Introduction

    47
  • 38.2 Digital Dialer and Network Communication

    47
  • 38.3 Wiring

    47
  • 38.4 Communication Programming

    47
  • 38.5 Additional Requirements

    47
• Wiring Diagrams

  48
  • 39.1 Prewired 866 Modules with NAC Extender

    48
  • 39.2 Prewired 866 Class B Style W Modules using Single Notification Appliance

    48
  • 39.3 Prewired 866 Class B Style W Modules with Multiple Notification Appliances

    49
  • 39.4 Prewired 866 Class B Style W Modules with Dual Notification Appliance Circuits

    50
  • 39.5 867 Class B Style W Notification Appliance Circuit

    51
  • 39.6 867 Class B Style W Multiple Notification Appliance Circuit

    51
  • 39.7 867 Class B Style W Multiple Notification Appliance Circuits

    52
  • 39.8 Dual Style D Zone Module Installation

    53
  • 39.9 Remote Station Reversing Relay Connection

    54
  • 39.10 Second LX-Bus™ with Auxiliary Power Supply

    55
  • 39.11 LX-Bus™ Module Connection

    56
  • 39.12 Model 860 Relay Module Connection

    57
• Revisions to This Document

  58
• OPERATING INSTRUCTIONS MODEL XR2500F PANELS

  60
  • Mounting Instructions

    60
  • Listings and Approvals

    60