Manuels d'utilisation pour Epson MLC 104 IP Plus

Table des matières

• Chapter One

  5
• Introduction

  5
  • About this Manual

    6
  • About the MLC 104 IP Plus Medialink™Controllers

    6
  • About Global Configurator

    6
  • System Requirements

    7
  • Installing the Software

    7
  • Updating Firmware

    7
• Chapter Two

  8
• MLC 104 IP Plus Hardware Setup

  8
  • Right Side Panel Features and Connections

    9
  • Left Side/Top Panel Features and Connections

    12
  • Front Panel Features and Basic Operation

    13
    • Buttons

      13
    • Volume control

      13
    • Configuration (host control) port

      13
• Chapter Three

  14
• MLC 104 IP Plus Software Setup

  14
  • Step 1: Download Device Drivers

    15
  • Step 2: Create a New Project

    16
  • Step 3: Add an MLC 104 IP Plus Controller and Define its Location

    16
  • Step 4: Define E-mail Settings

    17
    • Defining e-mail server settings

      17
    • Setting up e-mail notifications

      18
    • Adding e-mail contacts

      18
  • Step 5: Add a Serial and an IR Device

    19
    • Downloading additional drivers

      19
    • Adding a serial driver

      19
    • Adding an IR driver

      20
  • Step 6: Configure the Front Panel Buttons

    20
    • Configuring an input button

      21
    • Configuring the On and Off buttons

      21
  • Step 7: Configure the Control Modules Using the Auto Fill Feature

    21
  • Step 8: Create a Display Shutdown Schedule

    23
  • Step 9: Create a Display Lamp Hour Warning E-mail

    24
  • Step 10: Create a Display Disconnection E-mail

    25
  • Step 11: Build and Upload a Configuration

    25
    • Building a configuration

      25
    • Uploading a configuration

      25
    • Accessing GlobalViewer®

      26