Manuels d'utilisation pour Honeywell 25/50ZS

Table des matières

• Table of Contents

  5
• Section 1: Product Description

  13
  • 1.1 Product Features

    14
  • 1.2 Specifications

    19
  • 1.3 Controls and Indicators

    23
    • 1.3.1 Single Zone Operation (ACC-25/50, ACC-25/50ZS, ACC- 25/50ZST)

      23
    • 1.3.2 Dual Zone Operation (ACC-25/50 Only)

      23
    • 1.3.3 RECORD/PLAYBACK

      24
    • 1.3.4 TROUBLE SILENCE

      24
    • 1.3.5 LEDs (visible with panel door closed):

      24
    • 1.3.6 ACC-ZPMK Zone Page Module (ACC-25/50ZS and ACC- 25/50ZST Panels only)

      24
    • 1.3.7 ACC-FFT Fire Fighter Telephone Module (ACC-25/50ZST only)

      25
    • 1.3.8 ACC-EPM External Page Module

      25
    • 1.3.9 Other System LEDs (located on main circuit board and modules)

      25
  • 1.4 Circuits

    26
  • 1.5 Components

    27
  • 1.6 Optional Modules

    29
  • 1.7 Getting Started

    30
    • 1.7.1 ACC-25/50, Requiring up to 50 Watts of Audio Power

      30
    • 1.7.2 ACC-25/50 With ACC-25/50DA(s), Requiring Greater Than 50 Watts of Audio Power

      30
    • 1.7.3 ACC-25/50ZS & ACC-25/50ZST, Requiring up to 50 Watts of Audio Power

      30
    • 1.7.4 ACC-25/50ZS & ACC-25/50ZST, Requiring Greater Than 50 Watts But Less Than 150 Watts

      31
• Section 2: Field Programming

  32
  • 2.1 S1 DIP Switch Settings on ACC-25/50 Series Motherboard (ACC-MCB)

    36
  • 2.2 S5 DIP Switch Settings on ACC-25/50 Series Motherboard (ACC-MCB)

    37
  • 2.3 S3 DIP Switch Settings on ACC-25/50 Motherboard (ACC- MCB)

    37
  • 2.4 S2 - Record Bypass Switch on ACC-25/50 Series Motherboard (ACC-MCB)

    38
  • 2.5 S4 - Battery Charger Switch on ACC-25/50 Series Motherboard

    39
  • 2.6 SW1 - Remote Microphone Installed Switch on ACC-FFT

    39
  • 2.7 SW2 - 2 Wire/4 Wire Connection on Telephone Loop

    39
  • 2.8 ACC-ZPMK Zone Page Module (ACC-25/50ZS & ACC- 25/50ZST)

    39
    • 2.8.1 S1 DIP Switch Settings on ACC-ZPMK

      40
    • 2.8.2 S2 and S3 Addressing Rotary Switches

      41
  • 2.9 ACC-ZSM Zone Splitter Module (ACC-25/50ZS & ACC- 25/50ZST)

    41
• Section 3: Installation

  42
  • 3.1 Mounting Options

    42
  • 3.2 Backbox Installation

    42
    • 3.2.1 Transformer Installation

      45
  • 3.3 Operating Power

    46
  • 3.4 Auxiliary DC Power Output Connections

    48
  • 3.5 Input/Initiating Circuits

    48
  • 3.6 Output Circuits

    49
    • 3.6.1 Master Command Bus Output

      49
    • 3.6.2 Trouble Relay - TB1

      51
    • 3.6.3 AC Power Loss Relay - TB7

      51
    • 3.6.4 Notification Appliance Circuit (Speakers)

      51
    • 3.6.5 ACC-ZPMK Zone Page Module - ACS Link (ACC-25/50ZS & ACC-25/50ZST)

      52
    • 3.6.6 ACC-ZSM Zone Splitter Module (ACC-25/50ZS & ACC- 25/50ZST)

      54
    • 3.6.7 ACC-FFT Fire Fighter Telephone Module (ACC-25/50ZST Only)

      55
  • 3.7 UL Power-limited Wiring Requirements

    56
  • 3.8 Installation of Option Modules

    57
    • 3.8.1 Audio Amplifier Module (ACC-AAM25)

      57
    • 3.8.2 70.7 VRMS Transformer Module (FC-XRM70)

      58
    • 3.8.3 Local Playback Speaker Module (FC-LPS)

      59
    • 3.8.4 ACC-EPM External Page Module

      60
• Section 4: Operating Instructions

  63
  • 4.1 Switch Functions

    63
    • 4.1.1 Single Zone Operation (ACC-25/50, ACC-25/50ZS, ACC-25/50ZST)

      63
    • 4.1.2 Dual Zone Operation (ACC-25/50 Only)

      63
    • 4.1.3 RECORD/PLAYBACK

      64
    • 4.1.4 TROUBLE SILENCE

      64
    • 4.1.5 Record/Playback Button - Record Customized Messages

      64
      • Recording Instructions

        64
    • 4.1.6 Record/Playback Button - Review Stored Message(s)

      65
    • 4.1.7 Main Control Panel Keypad Labels

      66
  • 4.2 ACC-ZPMK Switch Functions (ACC-25/50ZS & ACC- 25/50ZST)

    66
  • 4.3 ACC-FFT Answer Call Push-Button (ACC-25/50ZST)

    67
  • 4.4 LED Indicators

    67
    • 4.4.1 LEDs Visible with Backbox Door Closed (Figure 4.1 on page 63)

      67
    • 4.4.2 ACC-ZMPK LEDs Visible with Backbox Door Closed (Figure 4.4 on page 66)

      68
    • 4.4.3 ACC-FFT LEDs Visible with Backbox Door Closed (Figure 3.15 on page 55)

      69
    • 4.4.4 LEDs Visible with Door Open and Optional Dress Panel Removed (Figure 1.1 & Figure 1.2)

      69
  • 4.5 Operation

    70
    • 4.5.1 Fire Alarm

      70
    • 4.5.2 Fire Alarm Restoral

      70
    • 4.5.3 Manual Evacuation/Alert

      70
    • 4.5.4 Manual Evacuation/Alert Restoral

      71
    • 4.5.5 Audio On/Off: ACC-25/50 Single Zone and ACC-25/50ZS/T

      71
    • 4.5.6 All Call: ACC-25/50, Single Zone Configuration

      71
      • All-Call General Page Using Local Microphone

        72
      • All-Call General Page Using Optional Remote Microphone

        72
      • All-Call Emergency Page Using Local Microphone

        72
      • All-Call Emergency Page Using Optional Remote Microphone

        72
      • All-Call During FACP Activated Alarm

        72
      • All-Call During Manual Evacuation/Alert

        72
      • All-Call With Distributed Audio Panels

        72
    • 4.5.7 All-Call: ACC-25/50ZS & ACC-25/50ZST

      72
      • All-Call General Page Using Local/Integral Microphone

        72
      • All-Call General Page Using Optional Remote Microphone

        73
      • All-Call General Page Using Optional RPJ-F Remote Keyswitch via the Optional Fire Fighter Telephone Module:

        73
      • All-Call Emergency Page Using Local/Integral Microphone

        73
      • All-Call Emergency Page Using Optional Remote Microphone

        73
      • All-Call Emergency Page Using Optional RPJ-F Remote Keyswitch via the Fire Fighter Telephone Module

        73
      • All-Call During FACP Activated Alarm

        73
      • All-Call During Manual Evacuation/Alert

        73
    • 4.5.8 Paging: ACC-25/50 Single Zone

      73
      • General Page Using Local/Integral Microphone

        73
      • General Page Using Optional Remote Microphone

        73
      • Emergency Page Using Local/Integral Microphone

        74
      • Emergency Page Using Optional Remote Microphone

        74
    • 4.5.9 Paging: ACC-25/50 Dual Zone

      74
      • General Page Using Local/Integral Microphone

        74
      • General Page Using Optional Remote Microphone

        74
      • Emergency Page Using Local/Integral Microphone

        74
      • Emergency Page Using Optional Remote Microphone

        74
    • 4.5.10 Paging: ACC-25/50ZS & ACC-25/50ZST

      74
      • General Page Using Local/Integral Microphone

        74
      • General Page Using Optional Remote Microphone

        75
      • General Page Using the Optional RPJ-F Remote Keyswitch via the Optional Fire Fighter Telephone Module

        75
      • Emergency Page Using Local/Integral Microphone

        75
      • Emergency Page Using Optional Remote Microphone

        75
      • Emergency Page Using Optional RPJ-F Remote Keyswitch via the Optional Fire Fighter Telephone Module

        75
    • 4.5.11 Fire Fighter Telephone: ACC-25/50ZST Only

      75
      • Communication on the Telephone Loop

        75
      • Annunciation of Remote Telephone Locations (MS-9600 or MS-9200UDLS only)

        76
    • 4.5.12 Trouble Condition Response

      76
    • 4.5.13 Trouble Condition Restoral

      78
• Section 5: Application Examples

  80
  • 5.1 One Speaker Circuit on ACC-25/50

    80
  • 5.2 One Speaker Circuit With Backup on ACC-25/50

    81
  • 5.3 Two Speaker Circuits on ACC-25/50

    83
  • 5.4 Two Speaker Circuits on ACC-25/50

    85
  • 5.5 ACC-25/50ZS & ACC-25/50ZST Zone Splitting Applications

    87
    • 5.5.1 25 Watt Zone Splitting - Eight Speaker Circuits, Style Y (Class B)

      87
    • 5.5.2 25 Watt Zone Splitting - Four Speaker Circuits, Style Z (Class A)

      89
    • 5.5.3 50 Watt Zone Splitting - Eight Speaker Circuits

      91
  • 5.6 ACC-25/50 and ACC-25/50DA Installation

    93
  • 5.7 16 Theater Cineplex Utilizing ACC-25/50ZS With ACC- 25/50DAZS

    95
  • 5.8 Audio Command Center 24 Zone System

    96
• Section 6: Power Supply Calculations

  98
  • 6.1 Overview

    98
  • 6.2 Calculating the AC Branch Circuit

    98
  • 6.3 Calculating the System Current Draw

    98
    • 6.3.1 Overview

      98
    • 6.3.2 How to use Table 6.2 to calculate system current draws

      99
  • 6.4 Calculating the Battery Size

    100
    • 6.4.1 NFPA Battery Requirements

      100
    • 6.4.2 Selecting and Locating Batteries

      100
• Appendix A: Digital Voice Messages

  102
• Appendix B: Addressable Module Connections

  103
• Appendix C: Wiring Requirements

  104
• Appendix D: Programmed Activation by FACP

  105
  • D.1 MS-9600, MS-9200UDLS and MS-9200UD

    106
    • D.1.1 Overview

      106
    • D.1.2 Basic MS-9600/MS-9200UD/MS-9200UDLS & ACC-25/50ZS/T Step-By-Step Install/Setup

      106
    • D.1.3 Wiring From ACC-25/50ZS or ACC-25/50ZST to FACP

      107
    • D.1.4 ACC-25/50ZS and ACC-25/50ZST Switch Settings

      108
    • D.1.5 FACP Programming

      109
      • Programming Tips for MS-9600, MS-9600LD, MS-9200UDLS, and MS-9200UD

        110
      • Message Assignment - Speaker Specific

        110
      • Message Assignment - Zone Specific

        112
      • Fire Fighter Telephone SLC Point Assignment

        115
  • D.2 MS-5210UD

    118
    • D.2.1 Overview

      118
    • D.2.2 MS-5210UD Individual Zone Control With One or Two Messages

      118
      • ACC-25/50ZS/T DIP Switch Settings

        119
      • MS-5210UD Programming

        120
    • D.2.3 MS-5210UD All Zone Activation With One to Five Messages

      120
      • ACC-25/50ZS and ACC-25/50ZST Switch Settings

        121
      • ACM-8RF Programming

        121
      • MS-5210UD Programming

        121
  • D.3 MS-9200(E)

    122
    • D.3.1 Overview

      122
    • D.3.2 Basic MS-9200 & ACC-25/50ZS/T Step-By-Step Install/Setup

      122
    • D.3.3 Wiring From ACC-25/50ZS or ACC-25/50ZST to MS-9200(E)

      124
      • ACC-25/50ZS & ACC-25/50ZST Switch Settings

        125
    • D.3.4 FACP Programming

      125
  • D.4 MS-5UD-3/7 and MS-10UD-3/7

    127
    • D.4.1 Overview

      127
    • D.4.2 Basic ANN-BUS Step-By-Step Install/Setup

      127
    • D.4.3 ACC-ZPMK DIP Switch 1 Settings on ACC-25/50ZS and ACC-25/50ZST

      128
    • D.4.4 Wiring From ACC-25/50ZS or ACC-25/50ZST to FACP

      129
    • D.4.5 FACP Programming

      130
• Index

  138