Manuels d'utilisation pour INSTEON 2443-522

Table des matières

• About Micro On/Off

  3
  • Features and Benefits

    3
• Before Installation

  3
  • Identify Switch Type

    4
• Identifying the Electrical Wires in Your Home (North America only)

  4
• Identifying the Electrical Wires in Your Home (Europe/Australia/New Zealand)

  4
• Installation

  5
• Switch Operation Mode

  6
  • Change to Single Momentary Mode

    6
  • Change to Dual Momentary Mode

    6
  • Change to Latching Mode (default)

    6
• 3-Way Toggle Mode (Latching Switches Only, Default)

  7
• Local Control Operation

  7
  • Latching Wall Switch (Default)

    7
  • Single Momentary Switch

    8
  • Dual Momentary Switch

    8
• Adjust Local Settings

  8
  • Change LED Brightness (or turn it off)

    8
  • Error Blink

    8
  • Blink on Traffic

    9
  • Beep on Button Press

    9
  • Programming Lock

    9
• INSTEON Setup

  9
  • INSTEON Controllers, Responders and Links

    9
  • Configure INSTEON Settings

    9
  • Make Micro Module a Responder (Set button)

    9
  • Make Micro Module a Responder (Switch)

    10
  • Make Micro Module a Controller (Set button)

    10
  • Make Micro Module a Controller (Switch)

    10
  • Groups

    11
  • Scenes

    11
  • Make Micro Module a Controller of Multiple Responders

    11
  • Remove Micro Module as a Controller

    12
  • Remove Micro Module as a Responder

    12
  • Remove Micro Module as a Controller of Multiple Responders

    12
  • Factory Reset

    12
• X10 Setup

  13
  • Add X10 Address

    13
  • Remove X10 Address

    13
• Specifications

  14
• Troubleshooting

  17
  • Stuck/Disabled Button

    18
  • Phase Bridge Detect Beacon/RF Range Test

    19
• Certification and Warranty

  20
  • Certification

    20
  • FCC and Industry Canada Compliance Statement

    20
  • Declaration of Conformity

    20
  • ETL/UL Warning (Safety Warning)

    20
  • Limited Warranty

    20
  • Limitations

    21