Manuels d'utilisation pour Kramer Electronics Computer Accessories VP-81KSi

Table des matières

• 1 Introduction

  5
• 2 Getting Started

  5
  • 2.1 Quick Start

    5
• 3 Overview

  7
  • 3.1 Defining EDID

    8
• 4 Defining the VP-81KSi 8x1 UXGA/Audio STEP-IN Switcher

  9
  • 4.1 Using the IR Transmitter for the VP-81KSi

    11
• 5 Installing in a Rack

  12
• 6 Connecting the VP-81KSi 8x1 UXGA/Audio STEP-IN Switcher

  13
  • 6.1 Connecting the Balanced/Unbalanced Stereo Audio Output

    14
  • 6.2 Connecting Remote Contact Closure Input Selection Switches

    15
  • 6.3 Connecting the SI-1VGA Remote Step-in Module

    15
  • 6.4 Connecting the AV ON CAT 5 Twisted Pair Output

    16
  • 6.5 Connecting to the VP-81KSi via the RS232 Port

    16
  • 6.6 Connecting to the VP-81KSi via the RS-485 Port

    17
    • 6.6.1 Setting the RS-485 Machine Number and Bus Termination DIP-switches

      17
    • 6.6.2 Connecting and Controlling Multiple VP-81KSi Devices

      18
  • 6.7 Cascading Multiple VP-81KSi Devices

    18
  • 6.8 Controlling a Remote RS-232 Device

    19
  • 6.9 Connecting to the VP-81KSi via the Ethernet Port

    20
    • 6.9.1 Connecting Directly to the Ethernet Port

      20
    • 6.9.2 Connecting via a Network Hub, Switch, or Router

      22
    • 6.9.3 Configuring the Ethernet Port on the VP-81KSi

      22
• 7 Operating the VP-81KSi Locally via the Front Panel Buttons

  23
  • 7.1 Using the Front Panel INPUT SELECTOR Buttons

    23
  • 7.2 Using the Audio-Follow-Video/Breakaway Modes

    24
    • 7.2.1 Operating in Breakaway Mode

      24
    • 7.2.2 Switching to Audio Follow Video Mode

      24
  • 7.3 Setting the Audio Output Gain

    24
  • 7.4 Operating Cascaded VP-81KSi Devices

    24
• 8 Operating the VP-81KSi Remotely

  25
• 9 Operating the VP-81KSi Remotely using a Web Browser

  25
  • 9.1 To Log On to the VP-81KSi Web Pages

    26
  • 9.2 The Switching Matrix Page

    27
    • 9.2.1 Switching an Input to an Output

      28
    • 9.2.2 Operating in the Confirm Mode

      29
  • 9.3 The Audio Gain Page

    30
  • 9.4 The Configurations Page

    31
• 10 Upgrading the Firmware

  32
• 11 EDID

  32
• 12 Technical Specifications

  33
• 13 Communication Parameters

  34
• 14 Default EDID

  34
• 15 Table of ASCII Codes for Serial Communication (Protocol 3000)

  35
• 16 Table of Hex Codes for Serial Communication (Protocol 2000)

  36
• 17 Kramer Protocol

  37
  • 17.1 Switching Protocols

    38
    • 17.1.1 Switching Protocols via the Front Panel Buttons

      38
    • 17.1.2 Switching Protocols via Protocol Commands

      38
  • 17.2 Kramer Protocol 3000

    38
    • 17.2.1 Protocol 3000 Syntax

      38
    • 17.2.2 Command Part Details

      39
  • 17.3 Kramer Protocol 2000

    45