Manuels d'utilisation pour Kramer Electronics Printer VS-88HN

Table des matières

• 1 Introduction

  4
• 2 Getting Started

  5
  • 2.1 Achieving the Best Performance

    5
  • 2.2 Safety Instructions

    6
  • 2.3 Recycling Kramer Products

    6
• 3 Overview

  7
  • 3.1 Defining the VS-88HN 8x8 HDMI Matrix Switcher

    7
  • 3.2 Using the IR Transmitter

    10
• 4 Installing in a Rack

  11
• 5 Connecting the VS-88HN 8x8 HDMI Matrix Switcher

  12
• 6 Operating the VS-88HN 8x8 HDMI Matrix Switcher

  14
  • 6.1 Switching an Input to an Output

    14
  • 6.2 Acquiring the EDID

    14
    • 6.2.1 Acquiring the EDID from One Output

      15
    • 6.2.2 Acquiring the EDID from Different Outputs to Different Inputs

      15
    • 6.2.3 Acquiring the Default EDID

      16
  • 6.3 Storing and Recalling a Setting

    16
  • 6.4 Resetting the IP Parameters

    17
  • 6.5 Switching Between Protocol 2000 and Protocol 3000

    18
  • 6.6 Connecting via RS-232

    18
  • 6.7 Connecting via Ethernet

    18
    • 6.7.1 Connecting the Ethernet Port directly to a PC

      19
    • 6.7.2 Connecting the Ethernet Port via a Network Hub or Switch

      22
    • 6.7.3 Control Configuration via the Ethernet Port

      22
  • 6.8 Upgrading the Firmware

    22
• 7 Technical Specifications

  23
• 8 Default Communication Parameters

  24
• 9 Default EDID

  25
• 10 Kramer Protocol 2000

  28
• 11 Protocol 3000

  31
  • 11.1 Kramer Protocol 3000 Syntax

    31
    • 11.1.1 Host Message Format

      31
      • 11.1.1.1 Simple Command

        31
      • 11.1.1.2 Command String

        31
    • 11.1.2 Device Message Format

      31
      • 11.1.2.1 Device Long Response

        32
    • 11.1.3 Command Terms

      32
    • 11.1.4 Entering Commands

      33
    • 11.1.5 Command Forms

      33
    • 11.1.6 Chaining Commands

      33
    • 11.1.7 Maximum String Length

      33
  • 11.2 Kramer Protocol 3000 Commands

    34