Manuel D’UtilisationTable des matièresFive-Year Limited Warranty1MIL-140CRM and MIL-140TRM110BASE-FL to 10BASE-T1Media Converter for MiLAN's1Media Conversion System1Installation Guide1About this Manual2Introduction2Features2Figure 2. RJ-45 Pinouts2Table 2: Recommended Operation Conditions2Indicators3Specifications3Installation31. Make any configuration changes to the module (i.e., DIP switch settings).32. Remove the screws securing the faceplate and remove it from the chassis.33. Slide the module into the slot through the guide rails.34. Insert the module into the card-edge connector (port bay). Make sure it is seated firmly.35. Secure the module with the two thumbscrews located on the faceplate of the unit.3Figure 1. Inside of the MIL-1404Table 1. Link Sentry Features4Taille: 150 koPages: 4Language: EnglishOuvrir le manuel