Manuels d'utilisation pour Mitsumi electronic E Series

Table des matières

• Foreword

  3
• 1 Safety Precautions

  7
  • 1.1 UL Installation

    7
  • 1.2 General

    7
  • 1.3 During Use

    7
  • 1.4 Service and Maintenance

    8
  • 1.5 Dismantling and Scrapping

    8
• 2 Installation

  9
  • 2.1 Space Requirements

    9
  • 2.2 Installation Process

    9
    • 1. Unpack and check the delivery. If damage is found, notify the supplier.

      9
    • 2. Place the panel cut out where the operator terminal is to be situated, draw along the outer sides of the holes and cut according to the markings. If access to the text strip is needed, add extra space in the lower left corner.

      9
    • 3. Secure the operator terminal in position, using all the fastening holes and the provided brackets and screws:

      10
    • 4. Connect the cables in the specified order.

      10
    • 5. Carefully remove the laminated film over the operator terminal display, to avoid static electricity that could damage the terminal.

      10
    • 2.2.1 Mode Switches

      11
    • 2.2.2 Connections to the Controller

      11
    • 2.2.3 Other Connections and Peripherals

      11
• 3 Technical Data

  13
• 4 Chemical Resistance

  15
  • 4.1 Metal Casing

    15
  • 4.2 Keyboard and Display

    15
    • 4.2.1 Autotex F157

      15
    • 4.2.2 Display Surface

      16
• 5 Operator Terminal Drawings

  19
  • 5.1 Communication Ports

    19
  • 5.2 E1070 Outline

    20
  • 5.3 E1070 Text Strip

    21