Manuel D’UtilisationTable des matièresConnector Specifications3RJ45 Connector3DC Iris Lens Connector4Power-I/O Connector41.3.1 Equivalent Circuit for the Input Pin of the I/O Connector6Camera Output Timing Charts7Horizontal Timing7Vertical Timing72.2.1 Full Scanning72.2.2 1/2 Partial Scanning82.2.3 1/4 Partial Scanning82.2.4 AOI (Area of Interest)9Pixel Transferring Image10Camera Opeartional Modes11Normal Mode11Pulse Width Trigger Mode113.2.1 Timing113.2.2 Exposure Timing with the Positive Polarity Trigger Signal123.2.3 Exposure Timing with the Negative Polarity Trigger Signal12Edge Preset Trigger Mode133.3.1 Timing133.3.2 Exposure Timing with the Positive Polarity Trigger Signal143.3.3 Exposure Timing with the Negative Polarity Trigger Signal14Edge Preset Trigger Mode (Trigger input while the image is out)153.4.1 Timing153.4.2 Exposure Timing with the Positive Polarity Trigger Signal163.4.3 Exposure Timing with the Negative Polarity Trigger Signal16H reset mode17Communication Protocol18Communication Method18Communication Settings18Communication Format18Camera Control Command214.4.1 Camera Command List (Device Code: 000000)214.4.2 Camera Command List (Device Code: 100000)234.4.3 Descriptions of the Camera Control Commands (Device code: 000000);254.4.4 Descriptions of the Camera Commands (Device code: 100000);31GenICam Command / Camera Command Reference Table35Taille: 760 koPages: 38Language: EnglishOuvrir le manuel