Manuels d'utilisation pour Sony SDX-1100V/R

Table des matières

• 1. INTRODUCTION

  1
• 1.1. About this Product Specification Manual

  1
• 1.2. Introducing the Sony AIT Technology

  1
• 1.3. Features of the Drive

  1
• 1.4. Reference

  1
• 1.4.1. How to get ECMA-329 Standard Document

  1
• 2. SPECIFICATIONS

  2
• 2.1. Specifications

  2
• 2.1.1. Dimensions

  2
• 2.1.1.1. Mounting Holes

  2
• 2.1.2. Weight

  2
• 2.1.3. Connectors

  2
• 2.1.3.1. SCSI Cables and Terminators

  2
• 2.2. Environmental Specifications

  2
• 2.2.1. Temperature and Humidity Range

  2
• 2.2.2. Altitude

  2
• 2.2.3. Suspended Particulate

  2
• 2.2.4. Vibration

  2
• 2.2.5. Shock

  2
• 2.2.6. Acoustic Noise

  2
• 2.2.7. EMC

  2
• 2.2.8. Orientation

  2
• 2.3. Performance Specification

  2
• 2.3.1. Data Capacity

  2
• 2.3.2. Data transfer Rate

  2
• 2.3.2.1. Sustained Data Transfer Rate to and from the Tape

  2
• 2.3.2.2. Burst Transfer Rate to and from the SCSI Bus

  2
• 2.3.3. Initialize Time

  2
• 2.3.4. Load Time

  2
• 2.3.5. Unload Time

  2
• 2.3.6. Search Time

  2
• 2.3.7. Rewind Time

  2
• 2.3.8. Long Erase Time

  2
• 2.3.9. Error Rate

  2
• 2.3.10. Definition of Failure

  2
• 2.3.11. Mean Time Between Failures

  2
• 2.3.12. Mean Time to Repair

  2
• 2.3.13. Component Life

  2
• 2.3.14. Durability

  2
• 2.4. Safety

  2
• 2.4.1. Conditions of Acceptability

  2
• 2.5. Installation Requirements

  2
• 2.5.1. Power Requirements

  2
• 2.6. Data Compression

  2
• 3. INSTALLATION

  3
• 3.1. Installation Guide

  3
• 3.1.1. SCSI ID Number Jumper

  3
• 3.1.2. Termination Power Switch

  3
• 3.1.3. Parity Disable Jumper

  3
• 3.1.4. Data Compression ON Switch

  3
• 3.1.5. Power Connector

  3
• 3.1.6. SCSI 68 pin Connector

  3
• 3.1.7. Attaching and Removing the Dust Cover

  3
• 3.1.7.1. Attaching the Dust Cover

  3
• 3.1.7.2. Removing the Dust Cover

  3
• 4. OPERATION

  4
• 4.1. Summary of LED Indications

  4
• 4.2. Operator Action

  4
• 4.2.1. Powering up the Drive

  4
• 4.2.2. Inserting Cassettes

  4
• 4.2.3. Removing Cassettes

  4
• 4.2.4. Hard Reset Hole

  4
• 4.2.5. Write-Protecting Cassettes

  4
• 4.3. Internal Function

  4
• 4.3.1. The Load Sequence

  4
• 4.3.2. The Unload Sequence

  4
• 4.3.3. Power-Fail or SCSI Reset Handling

  4
• 4.3.4. Diagnostic and Normal Status Displays

  4
• 4.3.4.1. Diagnostic Status Display

  4
• 4.3.4.2. Normal Status Display

  4
• 4.4. Tape Alert

  4
• 4.5. Tape Format

  4
• 4.6. Maintenance, Troubleshooting and Service

  4
• 4.6.1. Head Cleaning

  4
• 4.6.1.1. Message When Cleaning Cassette is Necessary

  4
• 4.6.1.2. The condition of Cleaning Request

  4
• 4.6.1.3. Usage of Cleaning Cassette

  4
• 4.6.2. Troubleshooting Guide

  4
• 4.6.2.1. Operational Problems

  4
• 4.6.2.2. Read/Write Problems

  4
• 4.6.2.3. Replace Tape

  4
• 4.6.2.4. Media Warning

  4
• 5. SCSI INTERFACE

  5
• 5.1. Introduction

  5
• 5.2. SCSI Bus Operation

  5
• 5.3. Message Specification

  5
• 5.3.1. COMMAND COMPLETE (00h)

  5
• 5.3.2. EXTENDED MESSAGE (01h)

  5
• 5.3.2.1. PARALLEL PROTOCOL REQUEST (04h)

  5
• 5.3.2.2. SYNCHRONOUS DATA TRANSFER REQUEST (01h)

  5
• 5.3.2.3. WIDE DATA TRANSFER REQUEST

  5
• 5.4. Status Specification

  5
• 6. COMMAND SPECIFICATION

  6
• 6.1. ERASE 19h

  6
• 6.2. INQUIRY 12h

  6
• 6.3. LOAD/UNLOAD 1Bh

  6
• 6.4. LOCATE 2Bh

  6
• 6.5. LOG SELECT 4Ch

  6
• 6.6. LOG SENSE 4Dh

  6
• 6.6.1. The Log Page Descriptor

  6
• 6.6.2. The Log Parameter Descriptor

  6
• 6.6.3. Summary List of Supported Pages (00h)

  6
• 6.6.4. Write and Read Error Counters Pages (02h or 03h)

  6
• 6.6.5. Last N Error Events List (07h)

  6
• 6.6.6. Tape Alert Log Page (2Eh)

  6
• 6.6.7. Tape Log Page (30h) (Sony Unique)

  6
• 6.6.8. Tape Capacity Log Page (31h) (Sony Unique)

  6
• 6.6.9. Drive Usage Log Page (33h) (Sony Unique)

  6
• 6.6.10. Read and Write Frame Error Counter Page (34h & 35h)

  6
• 6.6.11. Data Compression Transfer Log Page (39h) (Sony Unique)

  6
• 6.6.12. AIT Log Page (3Ch) (Sony Unique)

  6
• 6.6.13. MIC Fixed Length Information Page (3Dh) (Sony Unique)

  6
• 6.6.14. MIC Variable Length Information Page (3Eh) (Sony Unique)

  6
• 6.7. MODE SELECT(6/10) 15h and 55h

  6
• 6.7.1. Disconnect-Reconnect Page (02h)

  6
• 6.7.2. Control Mode Page (0Ah)

  6
• 6.7.3. Data Compression Control Page (0Fh)

  6
• 6.7.4. Device Configuration Page (10h)

  6
• 6.7.5. Medium Partitions Parameter Page (11h)

  6
• 6.7.6. Informational Exceptions Control Page (1Ch)

  6
• 6.7.7. AIT Device Configuration Page (31h)

  6
• 6.8. MODE SENSE (6/10) 1Ah and 5Ah

  6
• 6.9. PERSISTENT RESERVE IN 5Eh

  6
• 6.10. PERSISTENT RESERVE OUT 5Fh

  6
• 6.11. PREVENT ALLOW MEDIUM REMOVAL 1Eh

  6
• 6.12. READ 08h

  6
• 6.13. READ ATTRIBUTE 8Ch

  6
• 6.13.1. ATTRIBUTE VALUES service action

  6
• 6.13.2. ATTRIBUTE LIST service action

  6
• 6.13.3. PARTITION LIST service action

  6
• 6.13.4. VOLUME LIST service action

  6
• 6.14. READ BLOCK LIMITS 05h

  6
• 6.15. READ BUFFER 3Ch

  6
• 6.16. READ POSITION 34h

  6
• 6.17. RECEIVE DIAGNOSTIC RESULTS 1Ch

  6
• 6.18. RELEASE (6/10) 17h and 57h

  6
• 6.19. REPORT DENSITY SUPPORT 44h

  6
• 6.20. REPORT DEVICE IDENTIFIER A3h

  6
• 6.21. REPORT LUNS A0h

  6
• 6.22. REQUEST SENSE 03h

  6
• 6.23. RESERVE (6/10) 16h and 56h

  6
• 6.24. REWIND 01h

  6
• 6.25. SEND DIAGNOSTIC 1Dh

  6
• 6.26. SET DEVICE IDENTIFIER A4h

  6
• 6.27. SPACE 11h

  6
• 6.27.1. CHECK CONDITION

  6
• 6.28. TEST UNIT READY 00h

  6
• 6.29. WRITE 0Ah

  6
• 6.30. WRITE ATTRIBUTE 8Dh

  6
• 6.31. WRITE BUFFER 3Bh

  6
• 6.32. WRITE FILEMARKS 10h

  6
• 7. DRIVE DIAGNOSTICS

  7
• 7.1. Overview

  7
• 7.2. Diagnostic Test

  7
• 7.2.1. Power-on Self Test

  7
• 7.2.2. SEND DIAGNOSTIC command - Self Test

  7
• 7.2.3. SEND DIAGNOSTIC command - Individual Test

  7
• 7.2.4. Diagnostic Test Number Summary

  7
• 7.2.5. RECEIVE DIAGNOSTIC RESULT command

  7
• 8. APPENDIX A: ASC & ASCQ ALPHABETIC ORDER

  8
• 9. APPENDIX B: ASC & ASCQ NUMERIC ORDER

  9
• 10. APPENDIX C: ASC & ASCQ FOR AIT (SONY UNIQUE)

  10
• 11. APPENDIX D: SCSI COMMANDS (OP CODE ORDER)

  11
• 12. APPENDIX E: MEDIUM AUXILIARY MEMORY ATTRIBUTE

  12
• 12.1. INTRODUCTION

  12
• 12.2. OVERVIEW

  12
• 12.3. MEDIUM AUXILIALY MEMORY ATTRIBUTE TYPES AND STATES

  12
• 12.4. MEDIUM AUXILIARY MEMORY ATTRIBUTE DATA

  12
• 12.4.1. Attribute Format

  12
• 12.4.2. Attribute Identifier Values

  12
• 12.4.3. Standard Device Type Attributes

  12
• 12.4.4. Standard Medium Type Attributes

  12
• 12.4.5. Standard Host Type Attributes

  12
• 13. APPENDIX F: AIT BASED WORM SYSTEM

  13
• 13.1. Important Notice

  13
• 13.2. Write-Protected (WP) Bit in Mode Sense Data

  13
• 13.3. How to detect a WORM cartridge.

  13
• 13.4. How to initialize a WORM cartridge

  13
• 13.5. How to handle the WORM cartridge in the drive.

  13
• RECOVERY

  14
• 14.1. Overview

  14
• 14.2. Creating Disaster Recovery Tape

  14
• 14.3. Configuring The Drive For Disaster Recovery Operation

  14
• 14.4. Exiting DR Mode

  14
• 14.5. Supported CD-ROM DR Command Set

  14
• 14.5.1. Inquiry (12h)

  14
• 14.5.2. Read 10 (28h)

  14
• 14.5.3. Read Capacity (0x25)

  14
• 14.5.4. Read TOC (0x43)

  14
• 14.5.5. Mode Sense/Select Page Code 0x3C

  14
• 14.6. Reset Handling

  14