Manuels d'utilisation pour Uniden BCD396T

Table des matières

• Precautions

  2
• Contents

  4
• The FCC Wants You to Know

  8
• Scanning Legally

  8
  • Introduction

    10
  • Feature Highlights

    11
• About This Manual

  16
  • Using the Multifunction Scroll Control

    16
  • Entering Text

    16
  • How the Scanner’s Controls Are Represented in This Manual

    17
    • 1. The first character of the system name is covered by a cursor. Rotate the scroll control to select the character you want.

      17
    • 2. Press 6/ on the keypad to select the next character. The cursor moves to the next character. To move the cursor to a previous character, press /4.

      17
    • 3. Repeat Steps 1 and 2 until you have entered the system name. Then press down on the scroll control or press E to accept the setting.

      18
  • Understanding Scanning

    19
• Understanding the Scanner’s Memory

  19
• What is Scanning?

  19
• What is Searching?

  20
• What is CTCSS/DCS?

  20
• Conventional Scanning

  22
  • Simplex Operation

    23
  • Repeater Operation

    23
• What is Trunk Tracking?

  23
• Trunked Scanning

  24
• Types of Trunking Systems

  25
  • Motorola Trunking

    25
  • EDACS Trunking

    27
  • LTR Trunking

    28
• I-Call (Motorola/EDACS)

  29
• Where To Get More Information

  29
  • Information On The Internet

    29
  • Included With Your Scanner

    31
  • Setting Up Your Scanner

    32
• Using Internal Batteries

  32
  • 1. Remove the battery cover and set the battery switch.

    33
  • 2. Install 3 AA batteries, matching the polarity symbols (+ -).

    33
  • 3. Replace the cover.

    34
• Using Rechargeable Batteries

  34
• Removing the Display Sticker

  35
• Using AC Power

  35
• Connecting the Antenna

  35
  • Connecting an Optional Antenna

    35
• Connecting an Earphone/ Headphone

  36
• Connecting an Extension Speaker

  36
• Attaching the Belt Clip

  36
• Attaching the Wrist Strap

  36
• A Look At The Keypad

  37
• A Look At The Display

  41
• Using Menu

  42
• Using Func

  42
  • Basic Operation

    43
• Turning On the Scanner and Setting the Squelch

  43
  • 1. Press and hold for about 2 seconds to turn on the scanner.

    43
  • 2. Briefly press the scroll control once. VOLUME LEVEL and a number appear on the display.

    43
  • 3. While VOLUME LEVEL appears, rotate the scroll control to set the volume to a comfortable listening level.

    43
  • 4. While holding down Func on the left side of the scanner, briefly press the scroll control once. SQUELCH LEVEL and a number appear on the display.

    43
  • 5. While SQUELCH LEVEL appears, rotate the scroll control to set the squelch to the level you want.

    43
• Scanning Systems

  43
  • Preprogrammed System Tips

    44
• Selecting Systems to Scan

  45
• Selecting System Channel Groups

  45
  • 1. Press to hold on the system (or hold down then rotate the scroll control to select the system).

    46
  • 2. Continue to hold and press the number key corresponding to the channel group you want to activate or deactivate.

    46
• Locking/Unlocking Systems

  46
  • 1. While holding down , rotate the scroll control to select the system.

    46
  • 2. Continue to hold down and press L/O to lock out the system. SYSTEM LOCKED appears.

    46
  • 3. Repeat Steps 1 and 2 to unlock a system you have previously locked.

    46
• Locking/Unlocking Channels

  46
  • 1. While holding down , rotate the scroll control to select the system where the channel is stored.

    46
  • 2. Release then press Hold within 2 seconds to hold on the system.

    46
  • 3. Rotate the scroll control to select the channel you want to lock or unlock.

    46
  • 4. Press L/O to lock or unlock the channel.

    46
• ID Scan/ID Search Mode

  46
• Temporarily Holding On a System

  47
• Holding On a Channel

  47
• Quickly Storing an ID During ID Search

  47
• Quick-Storing Channels or Talk Group ID’s

  47
  • 1. Hold on an existing channel in any system.

    47
  • 2. Enter the frequency or talk group ID you want to store (press twice to enter hyphens in talk group ID’s).

    47
  • 3. To quick-store the channel or talk group ID, press E. Otherwise, press No.

    48
• Quickly Recalling Channels

  48
  • 1. Press Hold to hold on any channel.

    48
  • 2. Press + Rcl. The scanner prompts you to select the system where the channel is stored.

    48
  • 3. Rotate the scroll control to select the system, then press E. The scanner prompts you to select the channel group where the channel is stored.

    48
  • 4. Rotate the scroll control to select the group, then press E. The scanner prompts you to select a channel.

    48
  • 5. Rotate the scroll control to select the channel, then press E to hold on that channel.

    48
• Monitoring Trunking Activity

  48
  • Using the Menu

    49
• Programming Systems Menu

  51
  • Other Settings

    53
• Displaying System Information

  53
  • Viewing Memory Used

    53
  • Viewing the Firmware Version

    53
• Adjusting the Key Beep

  53
• Locking/Unlocking the Keypad

  53
• Turning Power Save On or Off

  54
• Priority Scan

  54
  • Other Settings

    54
• Using the Backlight

  54
• Setting the Audio AGC

  55
• Adjusting the Display Contrast

  55
• Initializing the Scanner’s Memory

  55
• Connecting Your Scanner to a Personal Computer

  56
• Using the Cloning Options

  56
  • Wired Cloning

    57
  • On-Air Cloning

    58
  • Programming Radio Systems

    59
    • 1. Plan the system.

      59
    • 2. Program the system into your scanner according to the plan you prepared in Step 1.

      59
• Programming Conventional Systems

  60
  • Entering/Editing Conventional Channel Groups

    60
  • Entering/Editing Conventional Channels

    61
• Programming Motorola Systems

  62
  • Setting System Frequencies

    63
  • Setting Modulation

    64
  • Setting Attenuation

    64
  • Entering/Editing Motorola Channel Groups

    65
  • Entering/Editing Motorola Channels

    66
• Programming EDACS Systems

  66
  • Setting System Frequencies

    68
  • Entering/Editing EDACS Channel Groups

    68
  • Entering/Editing EDACS Channels

    69
• Programming LTR Systems

  69
  • Setting System Frequencies

    70
  • Entering/Editing LTR Channel Groups

    70
  • Entering/Editing LTR Channels/ Talkgroups

    71
  • Programming/Editing Optional Settings

    72
• System-Level Settings

  72
  • Editing the System Name

    72
  • Editing the System Quick Key

    73
  • Setting System Lockout

    73
  • Setting the System Hold Time

    74
  • Setting the Channel Delay Time

    74
  • Q Set Delay Time i

    74
  • Setting ID Scan/Search (Trunked Systems Only)

    75
  • Editing the Fleet Map (Motorola Systems Only)

    75
  • Setting the Motorola Status Bit (Motorola Systems Only)

    76
  • Setting the End Code Operation (Motorola Systems Only)

    77
  • Setting I-Call (Motorola Analog and EDACS Systems Only)

    77
  • Setting Emergency Alert (Motorola and EDACS Systems Only)

    78
  • Setting Control-Channel Only (Motorola Systems Only)

    78
  • Reviewing Locked Out Frequencies

    79
  • Clearing All Locked-Out IDs

    79
  • Setting the Digital Decode Threshold (Motorola and Conventional Systems Only)

    79
  • Setting the EDACS ID Format (EDACS Systems Only)

    80
  • Setting System Attenuation (Trunked Systems Only)

    81
  • Deleting Systems

    81
  • Copying Systems

    81
• Group-Level Settings

  82
  • Entering/Editing the Group Name

    82
    • 1. Rotate the scroll control to select the first letter.

      82
    • 2. Press and hold down then rotate the scroll control once to select the next letter.

      82
    • 3. Repeat Steps 1 and 2 until you have entered the system name. Then press E or press down on the scroll control to accept the setting.

      82
  • Setting the Group Quick Key

    83
  • Setting Group Lockout

    83
  • Deleting Groups

    83
• Channel-Level Settings

  84
  • Editing the Channel Name

    84
    • 1. Rotate the scroll control to select the first letter.

      84
    • 2. Press and hold down then rotate the scroll control once to select the next letter.

      84
    • 3. Repeat Steps 1 and 2 until you have entered the channel name. Then press E or press down on the scroll control to accept the setting.

      84
  • Setting Channel Priority (Conventional Channels Only)

    85
  • Setting Channel Alert

    85
  • Setting CTCSS/DCS (Conventional Channels Only)

    86
  • Setting the System Frequency Modulation

    87
  • Setting Channel Attenuation (Conventional Channels Only)

    88
  • Setting the Frequency Step (Conventional Channels Only)

    88
  • Setting Channel Lockout

    89
  • Deleting Channels

    89
  • Select the group g i Q Edit Channel g i Select the channel g i Q Delete Channelg i

    90
  • Copying/Pasting Channels

    90
  • Searching and Storing

    91
• Service Search

  91
  • 1. Press then turn the scroll control until Search for . . . appears. Then press down on the scroll control. The search feature options appear.

    91
  • 2. Press down on the scroll control to select Service Search.

    91
  • 3. Turn the scroll control until the type of service search you want appears, then press down on the scroll control to select it. The following search bands appear.

    91
• Quick Search

  92
• CTCSS/DCS Search

  92
  • 1. Press then turn the scroll control until Srch/CloCall Opt appears. Then press the scroll control. One of the search feature options appear.

    92
  • 2. Turn the scroll control until CTCSS/DCS Search appears, then press the scroll control to select it.

    92
  • 3. Turn the scroll control until On appears to turn on CTCSS/DCS search or until Off appears to turn it off, then press the scroll control.

    92
• Custom Search

  93
  • 1. Press then turn the scroll control until Search for ... appears. Then press the scroll control. Or, press + Scan/Srch, then select No. One of the search feature options appear.

    93
  • 2. Turn the scroll control until Custom Search appears, then press the scroll control to select it. The scanner starts custom se...

    93
  • Editing a Custom Search Range

    94
    • 1. Press then turn the scroll control until Search for ... appears. Then press the scroll control. Or press and Srch, then No. One of the search feature options appear.

      94
    • 2. Turn the scroll control until Edit Custom appears, then press the scroll control to select it.

      94
    • 3. Turn the scroll control until the name of the custom search range you want to edit appears, then press the scroll control to select it. The following options appear as you turn the scroll control.

      94
    • 4. Select the option you want to change for the custom search range you selected, then press the scroll control.

      95
  • Editing a Service Search

    95
    • 1. Press then turn the scroll control until Search for ... appears. Then press the scroll control. Or press and Srch, then No. One of the search feature options appear.

      95
    • 2. Turn the scroll control until Edit Service appears, then press the scroll control to select it.

      95
    • 3. Turn the scroll control to highlight the service search you want to edit, then press the scroll control to select it.

      95
• Auto Search and Store

  97
  • Selecting a System

    97
    • 1. Press then turn the scroll control until Search for ... appears. Then press the scroll control. One of the search feature options appear.

      97
    • 2. Turn the scroll control until Search and Store appears, then press the scroll control to select it.

      97
    • 3. Turn the scroll control until the system where you want to store the frequencies or talk group ID’s appears, then press the scroll control to select it.

      97
  • Storing a Conventional System

    97
    • 1. Follow Steps 1-3 under “Selecting a System”. A search option appears.

      97
    • 2. Turn the scroll control until the type of search you want appears, then press the scroll control to select it. A search band appears.

      98
  • Storing a Trunked System

    98
    • 1. Follow Steps 1-3 under “Selecting a System”. A search option appears.

      98
    • 2. Turn the scroll control until the type of search you want appears, then press the scroll control to select it. A search band appears. If all systems are locked out, All Locked! appears and the scanner does not store any frequencies.

      98
  • Using the Close Call Feature

    100
• Setting Close Call Options

  101
  • 1. Press then turn the scroll control until Close Call appears. Then press the scroll control. Close Call feature options appear.

    101
  • 2. Turn the scroll control to select an option.

    101
• Close Call Hits

  103
  • Search and Close Call Options

    104
• Managing Locked-Out Frequencies

  104
  • Unlocking All Frequencies

    104
  • Reviewing Locked Out Frequencies

    104
• Searching for Subaudible Tones

  104
• Screening Out Broadcast Sources

  105
• Finding Repeater Output Frequencies

  106
• Setting the Maximum Auto Store Value

  107
• Setting the Modulation Type

  107
• Setting Attenuation

  107
• Setting Data Skip

  108
• Setting the Delay Time

  108
• Setting the Search Frequency Step

  109
  • Using Weather Alert (SAME)

    110
• Searching For a Weather Broadcast

  110
• Fire Tone Out Operation

  110
  • Setting Tone-Out Standby

    111
  • Setting up Tone-Out

    111
• Turning Weather Alert On/Off

  112
• Programming a SAME Group

  113
• Setting WX Alert Priority

  114
  • Care and Maintenance

    115
• General Use

  115
• Location

  115
• Cleaning

  115
• Repairs

  116
• Birdies

  116
  • Troubleshooting

    117
  • Specifications

    121
  • Optional Accessories

    124
  • Appendix

    125
• Preset Fleet Maps

  125
• User Defined Fleet Maps

  127
  • Type I Programming Information

    127
  • Size Code Restrictions

    128
  • Planning

    129
• Collecting Information

  129
  • 1. Collect information about the system(s) you want to monitor.

    129
  • 2. Organize the system information using these system worksheets included in this appendix.

    130
  • 3. Follow the instructions in “Filling Out The Conventional System Worksheet” on Page 131, “Filling Out The Motorola Worksheet” on Page 131, and “Filling Out the LTR and EDACS Worksheet” on Page 133 to program your scanner.

    130
• Filling Out The Conventional System Worksheet

  131
  • System Name and Quick Key

    131
  • Group Name and Quick Key

    131
  • Frequency-Alpha Tag-Priority- CTCSS/DCS

    131
• Filling Out The Motorola Worksheet

  131
  • System Name and Quick Key

    131
  • System Type

    132
  • System Frequencies

    132
  • Fleet Map (Type I or Type I/Type II Hybrid Only)

    132
  • Band Plan (VHF or UHF Only)

    133
  • Group Name and Quick Key

    133
  • Talk Group ID-Alpha Tag-Alert

    133
• Filling Out the LTR and EDACS Worksheet

  133
  • System Name and Quick Key

    133
  • System Frequencies and LCN

    134
  • Group Name and Quick Key

    134
  • Talk Group ID-Alpha Tag-Alert

    134
• Conventional System Worksheet

  135
• Motorola System Worksheet

  136
• LTR/EDACS System Worksheet

  138
  • Preprogrammed Systems

    140
    • 1. Press and hold .

      140
    • 2. While continuing to hold , rotate the scroll control to select a system you want to lock out.

      140
    • 3. While continuing to hold , press L/O to lock out the system.

      140
    • 4. Repeat Steps 2, 3, and 4 to lock out additional systems.

      140
  • One-Year Limited Warranty

    152