Land Pride rcf3696 Manuale Utente
23
Section 1: Assembly & Set-Up
12/15/15
RCF3696, RCFM3696, RCF3610, & RCFM3610 Rotary Cutters 326-600M
RCF(M)3696 Tongue Assembly
Figure 1-20
RCF(M)3610 Tongue Assembly
Figure 1-21
33945
35009
Spring Hose Loop Assembly
Figure 1-19
Spring Hose Loop
Refer to Figure 1-19:
1.
1.
Attach mounting bracket (#1) with
3/4"-10 x 1 1/2" GR5 cap screw (#3) and
lock nut (#4) to the right-hand clevis as shown.
Tighten nut to the correct torque.
3/4"-10 x 1 1/2" GR5 cap screw (#3) and
lock nut (#4) to the right-hand clevis as shown.
Tighten nut to the correct torque.
2.
Attach spring hose loop (#6) to mounting
bracket (#1) with 3/8"-16 x 1" GR5 cap
screw (#2), flat washer (#5), and lock nut (#4).
Tighten nut to the correct torque.
bracket (#1) with 3/8"-16 x 1" GR5 cap
screw (#2), flat washer (#5), and lock nut (#4).
Tighten nut to the correct torque.
Tongue Assembly
Refer to Figure 1-20 for RCF(M)3696 and
Figure 1-21 for RCF(M)3610 cutters:
1.
Figure 1-21 for RCF(M)3610 cutters:
1.
Assemble tongue (#3) to the deck with
hitch pins (#9), spacer tubes (#2), and
linchpins (#8) as shown.
hitch pins (#9), spacer tubes (#2), and
linchpins (#8) as shown.
2.
Attach level rods (#4) to tongue (#3) with clevis
pins (#7), flat washers (#5), and cotter
pins (#6).
pins (#7), flat washers (#5), and cotter
pins (#6).
3.
Remove parking jack (#10) from storage
mount (#1) and attach to tongue (#3) with
detent hitch pin (#11). Make sure detent pin is
fully inserted.
mount (#1) and attach to tongue (#3) with
detent hitch pin (#11). Make sure detent pin is
fully inserted.
35006
NOTE: If preferred, the front guards may be
assembled first. See “Assembly of Optional
Equipment” on page 28 for front guard
assembly instructions.
assembled first. See “Assembly of Optional
Equipment” on page 28 for front guard
assembly instructions.
NOTE: Do not tighten hardware to the correct
torque until assembly is complete.
torque until assembly is complete.